All About Pocket Knives

dlr110 wrote: ↑Sat Aug 06, 2022 7:23 pm Check out my review under the Rough Ryder Forum.

Thanks for steering me in the proper direction. Seems like a pretty good knife overall.

TPK wrote: ↑Sun Aug 07, 2022 6:54 am Got this Sears Craftsman 9481 Trapper in the mail on Friday.

Lookin' good, Tom! If you don't have a huge pile.of Craftsman knives already, beware of rabbit holes!

Dan In MI wrote: ↑Sun Aug 07, 2022 6:01 pm

dlr110 wrote: ↑Sat Aug 06, 2022 7:23 pm Check out my review under the Rough Ryder Forum.

Thanks for steering me in the proper direction. Seems like a pretty good knife overall.

TPK wrote: ↑Sun Aug 07, 2022 6:54 am Got this Sears Craftsman 9481 Trapper in the mail on Friday.

Lookin' good, Tom! If you don't have a huge pile.of Craftsman knives already, beware of rabbit holes!

No chance of me getting a huge pile of any brand over here Dan.
A huge pile altogether yes, that could happen, but not from any one brand.

Nice Craftsman Tom, congratulations!

Madmarco wrote: ↑Sun Aug 07, 2022 6:36 pm Nice Craftsman Tom, congratulations!

Thanks Buddy! Appreciate it! I can't put my finger on it but some knives (like this one) are just kinda "special". They aren't really "special" but they feel "special" from the first time you put your hands on them. They have a "special" aura of friendliness. Yes, I'm crazy.

No, you're not crazy Tom. I know EXACTLY the feelings you refer to. What you described is right along the same line as "Comfort Knives", and that topic has over 50 pages so far, so plenty of others also know what you mean. It's not every knife you handle, just the ones that feel special the 1st time you pick them up.

Just came in this afternoon. Just sharpened up the blades, all took a great edge. Love the mid 50’s Kabars.

That one will keep you going! Love to see HOKs tuned up and carried.
Treefarmer

Super fast delivery but a disappointment. Compared to the stock picture the handles are washed out and a pale comparison.
(like the shield though)

Stock Photo.
What I received.

jerryd6818 wrote: ↑Tue Aug 09, 2022 2:52 pm Super fast delivery but a disappointment. Compared to the stock picture the handles are washed out and a pale comparison.
(like the shield though)

Stock Photo.
s-l500.jpg


What I received.

Case 2021 Mini-Trapper 6207 Barn Board Burnt Cream - Mark Open.JPG
Case 2021 Mini-Trapper 6207 Barn Board Burnt Cream - Pile Closed.JPG

It is a very nice knife and love a Trapper, but those scales do look very washed out. Sorry for the shady representation of the knife.

TPK wrote: ↑Sun Aug 07, 2022 6:54 am Got this Sears Craftsman 9481 Trapper in the mail on Friday. It's 3 7/8" with very fine I guess you'd call it "saw cute" delrin handles.
Thanks for looking friends!

Nice catch Tom

I’ve always admired Craftsman branded knives, but so far I’ve only bought one. I fear those rabbit holes you were previously warned about. I’ve been on a bit of a Camillus binge recently.

jerryd6818 wrote: ↑Tue Aug 09, 2022 2:52 pm Super fast delivery but a disappointment. Compared to the stock picture the handles are washed out and a pale comparison.
(like the shield though)

jerryd - I can't tell you how many times that exact same thing has happened to me. I finally had to quit buying knives based on stock photos unless the handle covers are made of a material that has no potential for unique character (like Micara or G-10). Unless I can see the exact knife I am buying, knives with natural handle materials like stag, dyed/burnt bone, mammoth ivory, etc., is a total crap shoot because these materials are so unique that no stock photo can accurately represent the individual character of every knife in the run. More often than not, the stock photo will show only the very best example from the run. This is especially true for stag.

If your disappointment is enough to ruin your satisfaction with the knife, you could always try toasting it with a propane torch to add a bit more color. I've never done that myself, but I know others who have (with varying degrees of success). I've even heard of using your own dye or even a permanent marker to achieve the same goal. Obviously not the ideal remedy but may be something to consider.

Whitneyrifle wrote: ↑Mon Aug 08, 2022 10:45 pm Love the mid 50’s Kabars.

I like that one, too. You done good!

jerryd6818 wrote: ↑Tue Aug 09, 2022 2:52 pm Super fast delivery but a disappointment. Compared to the stock picture the handles are washed out and a pale comparison.

Sure doesn't look as good as the one in the stock photo. But I'd carry the heck out of it. As light as it is, some use and age might give it some nice character.

QTCut5 wrote: ↑Tue Aug 09, 2022 6:06 pm You could always try toasting it with a propane torch to add a bit more color.

That's another option...but proceed with care.

Steamboat Willie wrote: ↑Tue Aug 09, 2022 5:59 pm

TPK wrote: ↑Sun Aug 07, 2022 6:54 am Got this Sears Craftsman 9481 Trapper in the mail on Friday. It's 3 7/8" with very fine I guess you'd call it "saw cute" delrin handles.
Thanks for looking friends!

Nice catch Tom

I’ve always admired Craftsman branded knives, but so far I’ve only bought one. I fear those rabbit holes you were previously warned about. I’ve been on a bit of a Camillus binge recently.

Thanks Willie!

It's hard for me to bing on brands because my choices are a bit limited over here but I think that's probably a good thing for my wallet. It does put a damper on things though & can be very frustrating at times. I really like the Camillus 72 patern but then again, who doesn't.

Whitneyrifle wrote: ↑Mon Aug 08, 2022 10:45 pm Just came in this afternoon. Just sharpened up the blades, all took a great edge. Love the mid 50’s Kabars.

Nice looking stockman! I haven't managed to pick up any Kabars yet. I've only run across a couple of them in the last 3 or so years and they were fixed blades.

TPK wrote: ↑Wed Aug 10, 2022 3:25 am

Whitneyrifle wrote: ↑Mon Aug 08, 2022 10:45 pm Just came in this afternoon. Just sharpened up the blades, all took a great edge. Love the mid 50’s Kabars.

Nice looking stockman! I haven't managed to pick up any Kabars yet. I've only run across a couple of them in the last 3 or so years and they were fixed blades.

Thank you for the kind words! Is it just difficult to find or import them into where you are? I ask because I am just unfamiliar with the regulations there. Obviously, where I am Ka-bars are very accessible.

jerryd6818 wrote: ↑Tue Aug 09, 2022 2:52 pm Super fast delivery but a disappointment. Compared to the stock picture the handles are washed out and a pale comparison.
(like the shield though)

You still have a great looking knife there, Jerry!

tvic wrote: ↑Wed Aug 10, 2022 1:30 pm

jerryd6818 wrote: ↑Tue Aug 09, 2022 2:52 pm Super fast delivery but a disappointment. Compared to the stock picture the handles are washed out and a pale comparison.
(like the shield though)

You still have a great looking knife there, Jerry!

Thanks.

Whitneyrifle wrote: ↑Wed Aug 10, 2022 11:40 am

TPK wrote: ↑Wed Aug 10, 2022 3:25 am

Whitneyrifle wrote: ↑Mon Aug 08, 2022 10:45 pm Just came in this afternoon. Just sharpened up the blades, all took a great edge. Love the mid 50’s Kabars.

Nice looking stockman! I haven't managed to pick up any Kabars yet. I've only run across a couple of them in the last 3 or so years and they were fixed blades.

Thank you for the kind words! Is it just difficult to find or import them into where you are? I ask because I am just unfamiliar with the regulations there. Obviously, where I am Ka-bars are very accessible.

Most of my knives, I buy on eBay Germany but the number & selection of American made knives is often very limited. The knives that I do buy in the U.S. (such as on the AAPK) I have sent to my Mom's house in Maryland & then when she sends us a package she puts my knives in with whatever she is sending us.

Got these 2 8OT beauties in today from Jeffin. He had a great sell on his Second Life Knives web page and I couldn’t resist. Now I have to decide which to keep and which one to gift.

They ARE beauties! Tough decision you gotta make, my friend!

tvic wrote: ↑Thu Aug 11, 2022 1:16 pm They ARE beauties! Tough decision you gotta make, my friend!

I let my buddy have his choice, he surprised me and went with the autumn bone. I really couldn’t decide my self so I was happy wit either. So this is my edc carry today

C-WADE7 wrote: ↑Thu Aug 11, 2022 3:03 am Got these 2 8OT beauties in today from Jeffin. He had a great sell on his Second Life Knives web page and I couldn’t resist. Now I have to decide which to keep and which one to gift.

Great stuff! I’ve got three of Jeff’s knives myself, and I’m sure there’ll be more!

Steamboat Willie wrote: ↑Thu Aug 11, 2022 7:11 pm Great stuff! I’ve got three of Jeff’s knives myself, and I’m sure there’ll be more!

He’s still got a few on sale on his Second Life Knives web page. I see people asking $25 for plain Old Timers all the time, Jeff’s $39 8OT that has been customized like this is a steal of a deal for a quality product.

That is a most excellent 8OT duo. You and your friend both did very well!

FedEx finally delivered my new Rough Ryders. The Tater Skin Brown Burlap Micarta Series.
There are a couple more in the series but I didn't want them. I really like these knifes and
they like me, I have the cut on my thumb to prove it. The brown micarta is very nicely done
but my pictures don't do them justice. I'll have more on the RR thread.