All About Pocket Knives

Real nice Barlow Garry!!!

KOOL 92 Steve..
John

Thanks John.
Picked it up from Steve "knifeaholic" 's store.
Great guy to deal with.

Carrying my TB Stag Teardrop today.

too many

Same as yesterday. I like the pile side more.

Steve Warden wrote: ↑Tue Apr 14, 2020 1:48 pm Same as yesterday. I like the pile side more.
20200414_083745.jpg

John

Black G-10 CASE 18 today!!!
John

good day for pics

A lot of Great looking knives fellows! Enjoying all the pictures!

TPK wrote: ↑Tue Apr 14, 2020 3:38 pm A lot of Great looking knives fellows! Enjoying all the pictures!

I second that. Thanks.

jmh58 wrote: ↑Mon Apr 13, 2020 12:31 pm Nice toters ya got there Tom!!!
John

Thanks John!

Case XX 6344 today. Pocket friendly with CV blades.

woodwalker wrote: ↑Tue Apr 14, 2020 6:28 pm Case XX 6344 today. Pocket friendly with CV blades.

same for me. .

richard wrote: ↑Tue Apr 14, 2020 9:16 pm

woodwalker wrote: ↑Tue Apr 14, 2020 6:28 pm Case XX 6344 today. Pocket friendly with CV blades.

same for me. .

Yours is nice Richard!! These are fantastic little knives!

woodwalker wrote: ↑Tue Apr 14, 2020 9:26 pm

richard wrote: ↑Tue Apr 14, 2020 9:16 pm

woodwalker wrote: ↑Tue Apr 14, 2020 6:28 pm Case XX 6344 today. Pocket friendly with CV blades.

same for me. .

Yours is nice Richard!! These are fantastic little knives!

i also have this 6232
same frame ? with 2 blades

here is a strange one, case 6 dot 6202 1/2 blade in a ulster frame. filed back spring and bolsters. samba handles.

richard wrote: ↑Tue Apr 14, 2020 9:36 pm

woodwalker wrote: ↑Tue Apr 14, 2020 9:26 pm

richard wrote: ↑Tue Apr 14, 2020 9:16 pm

same for me. .

Yours is nice Richard!! These are fantastic little knives!

i also have this 6232
same frame ? with 2 blades

Nice!!

If I may, the 6344 is 3 1/4" closed, the 6232 is 3 5/8" closed.

6 is code for bone
2 and 3 are code for number of blades
32 and 44 are frame numbers

If you knew this, forgive me. At the least maybe it will educate someone who may not know.

TPK wrote: ↑Sun Apr 12, 2020 3:41 pm

cody6268 wrote: ↑Sun Apr 12, 2020 3:25 pm Purple Spyderco Ladybug and Victorinox Cybertool 34

KIMG0200.JPG

Victorinox Cybertool 34 Been wanting a Tool with a bit holder. Nice!

I like bit drivers on multitools. Sometimes, the bits I mess with (T27, well nearly all Torx) aren't covered by the average multitool loadout, and I avoid Leatherman's bits and tools with bit drivers as they are two-dimensional and soft.


The CT line is more, or less, designed for work with computer; but it does have both Phillips #1 and #2. There is a second set of bits you can find (and I think it's easier in Europe) originally made for a version of the CT34 made for Beretta that is centered around handgun maintenance. Victorinox is still making them and selling them as replacements, as the XAVT has a second bit driver loaded with the Beretta bits. I have two computers that I plan to replace and upgrade the RAM on; one of them has to have the DVD drive taken out to access the sticks of RAM, and I know that's at least one of the Torx on the CT; and the case on my older PC uses Phillips (and the sticks of RAM I can actually see looking into the vent on the case; only the side of the case has to be taken off to access the RAM. But the CT41/CT L on the other hand, it's like the SwissChamp without all the silly stuff like the fish scaler and the added versatility of the CyberTool layer. If they weren't $150, I'd have had one by now. I think I paid around $30 for my CT34 used. The CT29 is like the Spartan, but adds the CT layer. Pretty slim for its functionality.


Gerber has a new tool that is SAK-sized, called the "Armbar Driver" with a 1/4 driver instead of the much smaller precision (3mm I think) on the CT. Problem is that it has a known issue that has yet to be fixed--there is almsot no spring tension on the tools. I was actually gonna get one myself becaue of the 1/4 driver; but not until the problems with the design are remedied.

Steve Warden wrote: ↑Tue Apr 14, 2020 9:57 pm

richard wrote: ↑Tue Apr 14, 2020 9:36 pm

woodwalker wrote: ↑Tue Apr 14, 2020 9:26 pm

Yours is nice Richard!! These are fantastic little knives!

i also have this 6232
same frame ? with 2 blades

Nice!!

If I may, the 6344 is 3 1/4" closed, the 6232 is 3 5/8" closed.

6 is code for bone
2 and 3 are code for number of blades
32 and 44 are frame numbers

If you knew this, forgive me. At the least maybe it will educate someone who may not know.

thank you steve , these both seem to be 3 5/8 closed . ?
so the red one is a 6332?

Steve Warden wrote: ↑Tue Apr 14, 2020 9:57 pm

richard wrote: ↑Tue Apr 14, 2020 9:36 pm

woodwalker wrote: ↑Tue Apr 14, 2020 9:26 pm

Yours is nice Richard!! These are fantastic little knives!

i also have this 6232
same frame ? with 2 blades

Nice!!

If I may, the 6344 is 3 1/4" closed, the 6232 is 3 5/8" closed.

6 is code for bone
2 and 3 are code for number of blades
32 and 44 are frame numbers

If you knew this, forgive me. At the least maybe it will educate someone who may not know.

Thanks Steve! We all need a little education and thank you for taking the time to share your knowledge! We appreciate ya.