Page 12 of 12
Re: Waterville Manufacturing / Waterville Cutlery Info
Posted: Tue Aug 30, 2022 5:55 am
by Ivoryman
Re: Waterville Manufacturing / Waterville Cutlery Info
Posted: Tue Aug 30, 2022 11:20 am
by BWT
They don’t get much better than that one Iman

Beautiful knife for sure!!
Re: Waterville Manufacturing / Waterville Cutlery Info
Posted: Tue Aug 30, 2022 12:58 pm
by peanut740
Nice!
Re: Waterville Manufacturing / Waterville Cutlery Info
Posted: Tue Aug 30, 2022 2:58 pm
by edge213
Re: Waterville Manufacturing / Waterville Cutlery Info
Posted: Tue Aug 30, 2022 4:25 pm
by Ivoryman
Thanks BWT, Peanut, and Edge. Really appreciate the comments and wondered if anyone noticed the stamp? Doesn't look right to me for some reason. Maybe cold stamped. The M looks stamped much deeper than the O, like they were not done at the same time, one at a time with different pressure. And the stamps I have seen don't look like this arch with K. C. M O. underneath. And I have never seen a knife with brass liners under the scales and yet steel divider/liner/center spacer or whatever it is in the middle. Anyone know if this is normal or a red flag? And even the angle of the blade coming off the frame seems too severe, not straight out enough. Also the tangs don't line up. The main blade step up from the tang to spine is way off from the secondary blade. Not even at all, and not square either. When closed they look way off. Shouldn't both tangs be square? Just my impression, but after going over this for pics the other day I noticed some stuff that seemed odd, or even not right in my mind. Also it appears the plunge grind lines in the flats on the blade run clear into the tang. Not just grind lines if they go clear over the tang to me. This looks like they were made after the stamping was done. Hope someone knows more about hundred year old (supposedly) knife making than I. But it made me wonder. Thanks again for the comments, I hope like hell it's authentic, given what I paid and how I love old knives. But I have to wonder now. Would welcome any thoughts on it if anyone has any. Thanks again.
Re: Waterville Manufacturing / Waterville Cutlery Info
Posted: Tue Aug 30, 2022 6:45 pm
by BWT
The only thing I noticed was the angle of the blade. I have a Aaron Burkinshaw with a angle like that and I was told it is a Burkinshaw blade in a NYK frame. The tang stamp I can’t help you don’t know much about that stuff??
Re: Waterville Manufacturing / Waterville Cutlery Info
Posted: Wed Aug 31, 2022 1:02 am
by Reverand
The bolsters not lining up makes me think that the knife may have been taken apart at some time in the past.
I have no other information about it's authenticity, never having held one.
Re: Waterville Manufacturing / Waterville Cutlery Info
Posted: Thu Nov 03, 2022 1:32 pm
by espn77
Cool sign
Re: Waterville Manufacturing / Waterville Cutlery Info
Posted: Thu Nov 03, 2022 2:05 pm
by BWT
Yes it is Keith

Re: Waterville Manufacturing / Waterville Cutlery Info
Posted: Thu Nov 03, 2022 2:56 pm
by doglegg
Ivoryman wrote: ↑Tue Aug 30, 2022 4:25 pm
Thanks BWT, Peanut, and Edge. Really appreciate the comments and wondered if anyone noticed the stamp? Doesn't look right to me for some reason. Maybe cold stamped. The M looks stamped much deeper than the O, like they were not done at the same time, one at a time with different pressure. And the stamps I have seen don't look like this arch with K. C. M O. underneath. And I have never seen a knife with brass liners under the scales and yet steel divider/liner/center spacer or whatever it is in the middle. Anyone know if this is normal or a red flag? And even the angle of the blade coming off the frame seems too severe, not straight out enough. Also the tangs don't line up. The main blade step up from the tang to spine is way off from the secondary blade. Not even at all, and not square either. When closed they look way off. Shouldn't both tangs be square? Just my impression, but after going over this for pics the other day I noticed some stuff that seemed odd, or even not right in my mind. Also it appears the plunge grind lines in the flats on the blade run clear into the tang. Not just grind lines if they go clear over the tang to me. This looks like they were made after the stamping was done. Hope someone knows more about hundred year old (supposedly) knife making than I. But it made me wonder. Thanks again for the comments, I hope like hell it's authentic, given what I paid and how I love old knives. But I have to wonder now. Would welcome any thoughts on it if anyone has any. Thanks again.
Iman, sorry for your concerns. Those bones are sure beautiful. I can't help with the validity questions.

Re: Waterville Manufacturing / Waterville Cutlery Info
Posted: Thu Nov 03, 2022 11:41 pm
by peanut740
espn77 wrote: ↑Thu Nov 03, 2022 1:32 pmCool sign
That are!

Re: Waterville Manufacturing / Waterville Cutlery Info
Posted: Thu Nov 03, 2022 11:51 pm
by FRJ
Nice old signs, Keith.

Re: Waterville Manufacturing / Waterville Cutlery Info
Posted: Tue Nov 29, 2022 9:15 pm
by New_Windsor_NY
Yesterday afternoon, my trip to the post office produced this beauty of a pocket knife. It now becomes the latest example to be added to this topic or thread and to be added to my general pocket knife collection. It is a WATERVILLE, three blades, swelled center, 3 5/8" closed, three tang stamps, a long matchstrike or blade pull, pocket knife. The main blade front tang stamp says "WATERVILLE (over) CUTLERY CO.(over) CONN." The secondary blade back tang stamp says "WATERVILLE (over) CUTLERY CO.(over) CONN." The third blade front tang stamp says "WATERVILLE (over) CUTLERY CO.(over) CONN." The three blades have NO wobble at all. The three blades ALL have a good, crisp half stop. The three blades ALL have a good, crisp snap. Overall, it is in EXCELLENT condition. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.
Re: Waterville Manufacturing / Waterville Cutlery Info
Posted: Tue Nov 29, 2022 9:52 pm
by Waukonda
That is one sweet knife, Skip, beautiful.! Great addition.
Re: Waterville Manufacturing / Waterville Cutlery Info
Posted: Tue Nov 29, 2022 10:00 pm
by New_Windsor_NY
Waukonda wrote: ↑Tue Nov 29, 2022 9:52 pm
That.....
Thank you, Ike.

Re: Waterville Manufacturing / Waterville Cutlery Info
Posted: Tue Nov 29, 2022 10:11 pm
by wlf
Really nice old knife.
Re: Waterville Manufacturing / Waterville Cutlery Info
Posted: Tue Nov 29, 2022 10:35 pm
by New_Windsor_NY
wlf wrote: ↑Tue Nov 29, 2022 10:11 pm
Really.....
Thank you, Lyle.

Re: Waterville Manufacturing / Waterville Cutlery Info
Posted: Tue Nov 29, 2022 11:16 pm
by BWT
Very nice Skip

I like it!!
Re: Waterville Manufacturing / Waterville Cutlery Info
Posted: Tue Nov 29, 2022 11:25 pm
by New_Windsor_NY
BWT wrote: ↑Tue Nov 29, 2022 11:16 pm
Very.....
Thank you, Bill.

Re: Waterville Manufacturing / Waterville Cutlery Info
Posted: Tue Nov 29, 2022 11:46 pm
by galvanic1882
Re: Waterville Manufacturing / Waterville Cutlery Info
Posted: Wed Nov 30, 2022 7:28 am
by woodwalker
New_Windsor_NY wrote: ↑Tue Nov 29, 2022 9:15 pm
Yesterday afternoon, my trip to the post office produced this beauty of a pocket knife. It now becomes the latest example to be added to this topic or thread and to be added to my general pocket knife collection. It is a WATERVILLE, three blades, swelled center, 3 5/8" closed, three tang stamps, a long matchstrike or blade pull, pocket knife. The main blade front tang stamp says "WATERVILLE (over) CUTLERY CO.(over) CONN." The secondary blade back tang stamp says "WATERVILLE (over) CUTLERY CO.(over) CONN." The third blade front tang stamp says "WATERVILLE (over) CUTLERY CO.(over) CONN." The three blades have NO wobble at all. The three blades ALL have a good, crisp half stop. The three blades ALL have a good, crisp snap. Overall, it is in EXCELLENT condition. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.
Very nice Skip! Waterville knives are hard to find. Great get!!

Re: Waterville Manufacturing / Waterville Cutlery Info
Posted: Wed Nov 30, 2022 11:35 am
by New_Windsor_NY
Thank you, Kevin.
