Page 2 of 9

Re: 2021 POS Roundtable

Posted: Tue Mar 23, 2021 1:22 am
by KLJ77
My first POS involvement, but I've got game. Put me in the box for the draw.

Re: 2021 POS Roundtable

Posted: Tue Mar 23, 2021 2:57 pm
by Meridian_Mike
Ah hah....
I was wondering when this was going to take place so I could send out some of the stinkies that are smelling up my shop!


I wanna play!
Put me down as a par-tiss-er-pent..

:D

Re: 2021 POS Roundtable

Posted: Tue Mar 23, 2021 3:02 pm
by Meridian_Mike
OLDE CUTLER wrote: Sat Mar 20, 2021 12:13 pm
I am in, and the receiver of my parcel is in for it!
OUCH....OC, that sounds like a threat! :shock:

8)

Re: 2021 POS Roundtable

Posted: Tue Mar 23, 2021 6:44 pm
by OLDE CUTLER
Meridian_Mike wrote: Tue Mar 23, 2021 3:02 pm
OLDE CUTLER wrote: Sat Mar 20, 2021 12:13 pm
I am in, and the receiver of my parcel is in for it!
OUCH....OC, that sounds like a threat! :shock:

8)
Take it as you will. Now I need to go out in my "shed" and look for some knives to send.
out-house-clipart-12.jpg
out-house-clipart-12.jpg (23.89 KiB) Viewed 3313 times

Re: 2021 POS Roundtable

Posted: Tue Mar 23, 2021 6:48 pm
by jerryd6818
Wait a minute. You have a seat in your privy? Wow!!! Y'all must have been rich. All we had was a board with a hole in it.

Re: 2021 POS Roundtable

Posted: Tue Mar 23, 2021 6:55 pm
by Meridian_Mike
OLDE CUTLER wrote: Tue Mar 23, 2021 6:44 pm
Take it as you will. Now I need to go out in my "shed" and look for some knives to send.
out-house-clipart-12.jpg
SO..., is this where you store all those "STINKER" knives?

Your parcel is gonna stink so bad, the USPS will get all backed up again.... (constipated??)

::facepalm::

Re: 2021 POS Roundtable

Posted: Tue Mar 23, 2021 7:54 pm
by OLDE CUTLER
jerryd6818 wrote: Tue Mar 23, 2021 6:48 pm Wait a minute. You have a seat in your privy? Wow!!! Y'all must have been rich. All we had was a board with a hole in it.
Yupper, you can't see the electric cord, but that seat is heated too.

Re: 2021 POS Roundtable

Posted: Tue Mar 23, 2021 7:56 pm
by OLDE CUTLER
Meridian_Mike wrote: Tue Mar 23, 2021 6:55 pm
OLDE CUTLER wrote: Tue Mar 23, 2021 6:44 pm
Take it as you will. Now I need to go out in my "shed" and look for some knives to send.
out-house-clipart-12.jpg
SO..., is this where you store all those "STINKER" knives?

Your parcel is gonna stink so bad, the USPS will get all backed up again.... (constipated??)

::facepalm::
Don't worry, the Roto Rooter man will also be there to assist.

Re: 2021 POS Roundtable

Posted: Tue Mar 23, 2021 9:01 pm
by Kolvir
jerryd6818 wrote: Tue Mar 23, 2021 6:48 pm Wait a minute. You have a seat in your privy? Wow!!! Y'all must have been rich. All we had was a board with a hole in it.
You have a board?? Wow, livin' fine there, all I have is a hole in the ground. With no shed.

Re: 2021 POS Roundtable

Posted: Wed Mar 24, 2021 12:22 am
by beresman
OK, I'm in! I'm sure there are a few knife-like objects I have tossed into the dark corners of the basement (or maybe the cat dragged them there) to be able to participate.

Re: 2021 POS Roundtable

Posted: Wed Mar 24, 2021 12:24 am
by beresman
Kolvir wrote: Tue Mar 23, 2021 9:01 pm
jerryd6818 wrote: Tue Mar 23, 2021 6:48 pm Wait a minute. You have a seat in your privy? Wow!!! Y'all must have been rich. All we had was a board with a hole in it.
You have a board?? Wow, livin' fine there, all I have is a hole in the ground. With no shed.
I've used one of those. You've heard the term "sittin' pretty"? This was neither of those.

Re: 2021 POS Roundtable

Posted: Wed Mar 24, 2021 1:36 am
by us2
Im new and count me in. I'll send a PM shortly. How do I create a new post? I have some knives that I would like to ask you guys some questions about. Do I need to be a premium member for a new post ?

Re: 2021 POS Roundtable

Posted: Wed Mar 24, 2021 4:59 am
by jerryd6818
us2 wrote: Wed Mar 24, 2021 1:36 am Im new and count me in. I'll send a PM shortly. How do I create a new post? I have some knives that I would like to ask you guys some questions about. Do I need to be a premium member for a new post ?
You need a premium membership to sell knives on AAPK but you can post for free until your fingers fall off.

To post, go to the top of the page and click on "Knife Forum". That will give you a list of the forums. Choose a forum by clicking on it, then click on "New Topic just under the name of the forum. Your best bet is to spend some time exploring. Click on stuff to see what you get. Don't worry, you can't break the forum.

Re: 2021 POS Roundtable

Posted: Wed Mar 24, 2021 9:24 am
by us2
Thanks Jerry

Re: 2021 POS Roundtable

Posted: Wed Mar 24, 2021 3:57 pm
by OLDE CUTLER
OK, I got some knives from my "shed", now I need to haul them back and sort thru them.
manure spreader.jpg

Re: 2021 POS Roundtable

Posted: Wed Mar 24, 2021 4:01 pm
by Meridian_Mike
OLDE CUTLER wrote: Wed Mar 24, 2021 3:57 pm OK, I got some knives from my "shed", now I need to haul them back and sort thru them.
SO.... what ya' gonna do?... you gonna spread 'em out so you can pick out the best?

::doh::

Re: 2021 POS Roundtable

Posted: Wed Mar 24, 2021 4:13 pm
by OLDE CUTLER
Meridian_Mike wrote: Wed Mar 24, 2021 4:01 pm
OLDE CUTLER wrote: Wed Mar 24, 2021 3:57 pm OK, I got some knives from my "shed", now I need to haul them back and sort thru them.
SO.... what ya' gonna do?... you gonna spread 'em out so you can pick out the best?

::doh::
NO, I am going to spread them out so I can pick out the WORST!! lol

Re: 2021 POS Roundtable

Posted: Wed Mar 24, 2021 4:17 pm
by Meridian_Mike
LOL....

OH, I see.... I shore do hope your package don't find it's way to Mississippi....

::oh_my::

Re: 2021 POS Roundtable

Posted: Fri Mar 26, 2021 2:17 pm
by Kolvir
Currently there are 23 members in the exchange(counting me). If you don't see your name below, and want in, you need to PM your address to me.

jerryd6818
doglegg
glennbad
herbva
DM11
CluelessNick
esge213
bladebuddy
cody6268
Reverand
knifegnome
orvet
petesknives
Jody744
Sundog knives
galvanic1882
KLJ77
Maridian_Mike
Olde Cutler
beresman
us2
QTCut5

Re: 2021 POS Roundtable

Posted: Fri Mar 26, 2021 3:45 pm
by jerryd6818
You're doin' a fine, fine job there Andy.

Re: 2021 POS Roundtable

Posted: Fri Mar 26, 2021 3:50 pm
by orvet
jerryd6818 wrote: Fri Mar 26, 2021 3:45 pm You're doin' a fine, fine job there Andy.
::nod:: ::tu:: ::clapping::

Re: 2021 POS Roundtable

Posted: Fri Mar 26, 2021 3:54 pm
by Kolvir
Hold the applause, there is still a week left for me to screw things up.

Re: 2021 POS Roundtable

Posted: Fri Mar 26, 2021 4:00 pm
by jerryd6818
Just a little genuine encouragement for a job well done to this point. Not accustomed to accolades???

Re: 2021 POS Roundtable

Posted: Fri Mar 26, 2021 4:03 pm
by Kolvir
Just a bit of silliness.

Re: 2021 POS Roundtable

Posted: Fri Mar 26, 2021 5:51 pm
by KLJ77
Kolvir wrote: Fri Mar 26, 2021 3:54 pm Hold the applause, there is still a week left for me to screw things up.
Well, even if you do somehow 'screw things up', we have all the confidence in the world in you that you'll do a "fine" job of that too. ::tu:: So, no matter the outcome, it is muchly appreciated that you took on the task of coordinating this great endeavor.

Kudos & Bravo Zulu! ::handshake::