Page 2 of 8
Re: Rodgers and Sons
Posted: Tue May 14, 2019 3:19 pm
by danno50
Good thread, Corso, and a couple of real nice knives!
Mike, I love those two exceptional knives, especially the carved pearl congress!
Smiling-knife: beautiful stainless, great handles!

Good etch (or likely stamping?) on the stockman. Great pictures as well! A few of those gentleman had been working for Joseph Rodgers since they were 9 years old.
John, I never get tired of looking at that stag congress, exceptional knife!
Lee, three good ones, I really like that pearl quill knife, interesting frame shape!
Joe, you made a good user out of that stockman!
Ray, great batch of Joseph Rodgers!

That scissors knife is unique! I really like the 4 blade pearl!
I have only the one Joseph Rodgers, which I posted in the bareheaded thread. I will get another photo and put it into this thread as well.
Re: Rodgers and Sons
Posted: Tue May 14, 2019 3:47 pm
by smiling-knife
Great Jos Rodgers knives everyone. This is a WWI GI British Army knife.
Re: Rodgers and Sons
Posted: Tue May 14, 2019 5:26 pm
by LongBlade
Nice knife S-K

... Rodgers made so many knife patterns and all seem to be top notch!!
Re: Rodgers and Sons
Posted: Tue May 14, 2019 5:52 pm
by Corso
kootenay joe wrote:It would be interesting to know how the steel on an older Jos. Rodgers & Sons holds up when compared with a USA knife of similar age.
J.R. is famous for fit & finish and top handle materials but were the blades any better than less expensive knives when it comes to sharpening and edge holding ?
I have never seen a post about how well an older/vintage J.R. knife performs.
kj
I can't realy say how they compair against old US made folders as my oldest is a Camillus #21 but my 3" boys knife is kicking the stuffing out of my GEC #14 so far.
I love the #14 but this little Rodgers is sharper and cutting far better
The two blade pen knife will be going up against a Case soon but I expect similar results
Re: Rodgers and Sons
Posted: Tue May 14, 2019 10:47 pm
by kootenay joe
Thanks Corso. I am surprised to hear an old J.R. is out-cutting a 1095 steel blade made recently.
kj
Re: Rodgers and Sons
Posted: Wed May 15, 2019 5:47 am
by Corso
I was too
its a straight out the box #14 so I think it will improve with a bit of work
The Rodgers has an almost convex edge to it that just seems to work - I only stropped it when I got it and it was shaving hair
The GEC with a light strop didn't shave hair out the box - with a bit of work it will. Then the real tests can start
The GEC does beat the Rodgers for confort of use but thats only because the scales are a little thicker - not that I would but if the Rodgers had new scales I don't think it would ever leave my side
Re: Rodgers and Sons
Posted: Wed May 15, 2019 9:14 pm
by ObsidianEdge
I enjoy seeing the Rodgers knives! I have one but would love to find more.
Re: Rodgers and Sons
Posted: Wed May 15, 2019 9:26 pm
by galvanic1882
Mike that is one beautiful knife
Re: Rodgers and Sons
Posted: Wed May 15, 2019 10:07 pm
by LongBlade
Mike - That’s a stunner and if you were only going to have one that is it - beauty of a whittler

Re: Rodgers and Sons
Posted: Wed May 15, 2019 10:12 pm
by FRJ
Beautiful knife, Mike.
Love those little whittlers.

Re: Rodgers and Sons
Posted: Wed May 15, 2019 10:35 pm
by ObsidianEdge
Thanks guys. It's got a pin crack but otherwise pretty good. Took a steady hand to grind those blades!
Re: Rodgers and Sons
Posted: Wed May 15, 2019 11:26 pm
by galvanic1882
Oh Gezz a pin crack you better send that baby to me it should not be anywhere near the other beauties you have Mike

Re: Rodgers and Sons
Posted: Thu May 16, 2019 2:41 am
by danno50
ObsidianEdge wrote:I enjoy seeing the Rodgers knives! I have one but would love to find more.
Wouldn't we all!! Beautiful knife!

Re: Rodgers and Sons
Posted: Thu May 16, 2019 3:58 am
by kootenay joe
What are the other markings on the pearl sleeve board whittler ?
kj
Re: Rodgers and Sons
Posted: Fri May 17, 2019 3:02 am
by wlf
smiling-knife wrote:Beautiful knives John.

Great to see you again S-k
Lovely knives of the highest quality everyone.
Re: Rodgers and Sons
Posted: Wed Aug 07, 2019 4:32 pm
by JohnR
Wake this thread up, added a very nice Rodgers stag pen knife, I would say little to no use, 3 1/4", does have one crack in stag that is tight and hard to see. Marked Cutlers To His Majesty and #6 Norfolk St, so I think it is pre WW2.
Re: Rodgers and Sons
Posted: Wed Aug 07, 2019 5:02 pm
by danno50
Beautiful knife

, John!

Great stag!
Re: Rodgers and Sons
Posted: Thu Aug 08, 2019 1:13 pm
by JohnR
danno50 wrote:Beautiful knife

, John!

Great stag!
Thank you Dan, Rodgers did use some great stag.
Re: Rodgers and Sons
Posted: Sun Sep 01, 2019 11:24 am
by ratlesnake75
My Contribution to the thread is my Joseph Rodgers to her Majesty -- 4" Closed.
Kind Regards,
Mark
Re: Rodgers and Sons
Posted: Thu Sep 05, 2019 3:06 pm
by galvanic1882
ratlesnake75 wrote:My Contribution to the thread is my Joseph Rodgers to her Majesty -- 4" Closed.
Kind Regards,
Mark
JohnR wrote:Wake this thread up, added a very nice Rodgers stag pen knife, I would say little to no use, 3 1/4", does have one crack in stag that is tight and hard to see. Marked Cutlers To His Majesty and #6 Norfolk St, so I think it is pre WW2.
Great knives guys.
Here is my latest. It's 3" closed. I love the sunk joints, they made a great knife!!
Re: Rodgers and Sons
Posted: Thu Sep 05, 2019 3:12 pm
by LongBlade
Re: Rodgers and Sons
Posted: Thu Sep 05, 2019 3:41 pm
by FRJ
Mike, that thing is absolutely beautiful.
Congratulation on taking ownership of that one.
Re: Rodgers and Sons
Posted: Thu Sep 05, 2019 3:56 pm
by kootenay joe
WOW ! Mike i believe that is the famous Rodgers "Norfolk" pattern. What a great find. Top manufacturer, best pattern, and the very best stag. Wow !
kj
Re: Rodgers and Sons
Posted: Thu Sep 05, 2019 4:22 pm
by galvanic1882
Thanks guys, I was really surprised but very glad

there was not much bidding on this one!!
Re: Rodgers and Sons
Posted: Thu Sep 05, 2019 10:07 pm
by JAMESC41001
That’s sweet Mike.