All About Pocket Knives

joeradza wrote:I had a Case 21051LSSP that I had Glenn recover in stag. He also did away with the lanyard hole and rounded the profile of the butt end. Before and after.

QTCut5 wrote:My first Glennbad mod--which I've had for about 5 years or so.

I asked Glenn to replace the yellow synthetic handle on this Case Copperlock (549WL CV) with Gnarly Stag, and he delivered in spades!

I never get tired of chicken eyeing and coon fingering this beauty.

P4220007.JPGP4220008.JPG

~Q~

QTCut5 wrote: ↑Fri Aug 07, 2020 2:41 am I don't know how many mods Glenn has done in the year or so since the last post in this thread, but I feel extremely fortunate that he did these two Case Wharncliffe Mini Trappers for me recently and I think you'll understand why.

The transition is mind-boggling and so stunning that words fail me, so I'll just have to let the results speak for themselves.

BEFORE:
P1010006.JPGP1010005.JPG


AFTER:
P8060041.JPGP8060021.JPGP8060028.JPGP8060027.JPG

Clearly Glenn is super talented and I am not worthy

Ivoryman wrote: ↑Sat Aug 08, 2020 4:30 pm Glennbad put some tusk on this Copperlock. Also got rid of the cap and gave me a lanyard tube. Whole different animal.

Ivoryman wrote: ↑Sat Aug 08, 2020 4:30 pm Glennbad put some tusk on this Copperlock. Also got rid of the cap and gave me a lanyard tube. Whole different animal.

Ivoryman wrote: ↑Sat Aug 08, 2020 4:30 pm Glennbad put some tusk on this Copperlock. Also got rid of the cap and gave me a lanyard tube. Whole different animal.

glennbad wrote: ↑Sun Aug 09, 2020 11:23 pm You guys are too kind, thanks!

Railsplitter wrote: ↑Mon Aug 10, 2020 10:02 am I bought this Schatt & Morgan Heritage Series Cattleman and upon arrival I discovered that the nail pull on the Sheepsfoot blade was inaccessible without opening the Spear blade first which was a ridiculously poor design.
IMG_3100.JPG
IMG_3097.JPG

I sent it off to Glenn for a blade delete and he did a stellar job. Glenn took a virtually unusable knife and turned it into a knife that I’m proud to own.
IMG_5436.JPG
IMG_5438.JPG

He even got the blade nicely centered.
IMG_5437.JPG

Ironically, Queen came out with a single blade version just like this shortly after I got mine back from Glenn. I could have just waited and got one of those but then I wouldn’t have this cool story to tell.

Glenn, it’s been a few years since you worked on this knife but I’m still just as giddy about it as I was the day I got it back from you. Thanks again man!

Railsplitter wrote: ↑Mon Aug 10, 2020 10:02 am I bought this Schatt & Morgan Heritage Series Cattleman and upon arrival I discovered that the nail pull on the Sheepsfoot blade was inaccessible without opening the Spear blade first which was a ridiculously poor design.
IMG_3100.JPG
IMG_3097.JPG

I sent it off to Glenn for a blade delete and he did a stellar job. Glenn took a virtually unusable knife and turned it into a knife that I’m proud to own.

Great to see that one, sweet mod and of course Glenngreat workmanship and finsishing. Congrats and enjoy.

KnifeSlinger#81 wrote: ↑Fri Feb 15, 2019 5:52 pm Here's another camillus that Glenn did for me, this one is a 67 stockman. These are the pictures he took of it since I have never photographed it. Note the fancy shield he put on it