All About Pocket Knives

Posted: **Fri Sep 13, 2019 11:20 pm**

jerryd6818 wrote:SharpEdge1, welcome to AAPK. Glad to have you aboard.

Thanks much jerryd6818. Nice to be here. Been lurking as a visitor for quite a while.

Posted: **Sun Sep 15, 2019 9:13 am**

SharpEdge1 wrote:
jerryd6818 wrote:SharpEdge1, welcome to AAPK. Glad to have you aboard.
Thanks much jerryd6818. Nice to be here. Been lurking as a visitor for quite a while.

Then it's time to step out of the shadows and join the rest of us. When you have a minute, you might want to stop down at "‹Member Introductions" ---► https://www.allaboutpocketknives.com/kn ... m.php?f=20 and give us a little peek at who you are.

Posted: **Sat Nov 02, 2019 5:06 pm**

I picked up this Sabre electricians knife at our local flea market for a few bucks over the weekend. Very good condition and usable. I had not seen a Sabre electricians knife before this one. Tang stamp is Sabre Japan 535, it has the locking screwdriver blade as most electricians knives do, and is 3 3/4" overall closed length.

Posted: **Sat Nov 02, 2019 5:40 pm**

I once had an identical Electrician's knife which was marked "Monarch". I believe that Sabre and Monarch were affiliated.
I modded it into a Barlow and gifted it to a friend. It hsd some good steel, and snapped lije a bear trap!

Posted: **Sat Nov 07, 2020 7:19 pm**

I picked up this nice Sabre Barlow at our local fleamarket this weekend for an Abe. Does not look like it has been used. This one does not have a pattern number stamped on it, maybe the Barlows didn't. This one has bone handles, brass liners, and steel bolsters.

Posted: **Sun Nov 08, 2020 1:40 am**

OLDE CUTLER wrote: ↑Sat Nov 07, 2020 7:19 pm I picked up this nice Sabre Barlow at our local fleamarket this weekend for an Abe. Does not look like it has been used. This one does not have a pattern number stamped on it, maybe the Barlows didn't. This one has bone handles, brass liners, and steel bolsters.
IMG_3895.JPG
IMG_3896.JPG
IMG_3898.JPG

Very nice OC! Pretty one!

Posted: **Thu Jan 28, 2021 2:13 pm**

I have this Sabre 603 jack that I think might actually be in a Remington or Winchester frame. The pivot pin has definitely been monkeyed with. I haven't seen any Sabre pocket knives with jigged bone like this or this color. The snap is excellent, pretty full blade that fills the well. The blade/spring depth is slightly off. It was in the Rusty Rooster Antique Mall $4 box.

Posted: **Thu Jan 28, 2021 3:20 pm**

1967redrider wrote: ↑Thu Jan 28, 2021 2:13 pm I have this Sabre 603 jack that I think might actually be in a Remington or Winchester frame. The pivot pin has definitely been monkeyed with. I haven't seen any Sabre pocket knives with jigged bone like this or this color. The snap is excellent, pretty full blade that fills the well. The blade/spring depth is slightly off. It was in the Rusty Rooster Antique Mall $4 box.

I like that one a lot, John. Interesting knife...

Posted: **Thu Jan 28, 2021 4:11 pm**

Reverand wrote: ↑Sat Nov 02, 2019 5:40 pm I believe that Sabre and Monarch were affiliated.

Ya think?

Posted: **Thu Jan 28, 2021 4:18 pm**

jerryd6818 wrote: ↑Thu Jan 28, 2021 4:11 pm
Reverand wrote: ↑Sat Nov 02, 2019 5:40 pm I believe that Sabre and Monarch were affiliated.

Ya think?

That is a sweet one, too, Jerry

.. I have several Sabre Japan barlows and they are well put together knives. . They take a razor edge and hold it well..

Posted: **Thu Jan 28, 2021 4:50 pm**

Stanwade wrote: ↑Thu Jan 28, 2021 4:18 pm
jerryd6818 wrote: ↑Thu Jan 28, 2021 4:11 pm
Reverand wrote: ↑Sat Nov 02, 2019 5:40 pm I believe that Sabre and Monarch were affiliated.

Ya think?

That is a sweet one, too, Jerry .. I have several Sabre Japan barlows and they are well put together knives. . They take a razor edge and hold it well..

I have a handful. I wouldn't hesitate to buy more of the right pattern (medium jack) for the right price.

Posted: **Thu Jan 28, 2021 7:46 pm**

jerryd6818 wrote: ↑Thu Jan 28, 2021 4:50 pm
Stanwade wrote: ↑Thu Jan 28, 2021 4:18 pm
jerryd6818 wrote: ↑Thu Jan 28, 2021 4:11 pm

Ya think?

That is a sweet one, too, Jerry .. I have several Sabre Japan barlows and they are well put together knives. . They take a razor edge and hold it well..
I have a handful. I wouldn't hesitate to buy more of the right pattern (medium jack) for the right price.

How's $4, Jerry, but it might be cobbled.

However, it will cut.

Posted: **Thu Jan 28, 2021 9:01 pm**

1967redrider wrote: ↑Thu Jan 28, 2021 7:46 pm
jerryd6818 wrote: ↑Thu Jan 28, 2021 4:50 pm
Stanwade wrote: ↑Thu Jan 28, 2021 4:18 pm

That is a sweet one, too, Jerry .. I have several Sabre Japan barlows and they are well put together knives. . They take a razor edge and hold it well..
I have a handful. I wouldn't hesitate to buy more of the right pattern (medium jack) for the right price.

How's $4, Jerry, but it might be cobbled. However, it will cut.

Okay, so maybe I would hesitate. I try not to buy cobbled knives.

Posted: **Fri Jan 29, 2021 4:29 am**

A couple of Sabres and a Monarch folding hunter.

Posted: **Fri Jan 29, 2021 2:33 pm**

knife7knut wrote: ↑Fri Jan 29, 2021 4:29 am A couple of Sabres and a Monarch folding hunter.

Your Monarch Hunter is missing the shield too. Herb added a shield to mine, and I'm really pleased with the end result.

Posted: **Fri Feb 05, 2021 2:18 am**

Picked this up with a Camillus Scoutie in a bag for $3. Didn't really want it but when I got it home and cleaned it up ,it's not a bad piece. Big knife, 6" closed, heavy brass like a Buck 110, decent wood and well made. Nice grinds. I'm not a fan of Asian knives but I have to admit this one "ain't bad". Shaving sharp. Far superior to any Pakistani copy. The shield is on the pile side , strange?
Is G96 related to Sabre?

J.O'.

Posted: **Fri Feb 05, 2021 2:28 am**

Forgot to mention the tang stamp is: (as appears)
MODEL 980
RUSTPROOF
STEEL Japan

J.O.

Posted: **Fri Feb 05, 2021 4:04 am**

Ridgegrass wrote: ↑Fri Feb 05, 2021 2:28 am Forgot to mention the tang stamp is: (as appears)
MODEL 980
RUSTPROOF
STEEL Japan
G-96 knives were sold by Jet-Aer Corp. of Paterson NJ and I believe all were made in Japan.I have a bunch of them and they are great knives.

J.O.

Posted: **Fri Feb 05, 2021 8:23 am**

All of my Sabre Japan barlows take and hold a razor sharp edge. I'm of the opinion that they are made from fine steel, whatever composition it might be.

Posted: **Fri Feb 05, 2021 12:17 pm**

K7K: Good Lord!
Stan: Guess I learned something. J.O'.

Posted: **Sun Mar 21, 2021 4:21 pm**

I picked up this fishing knife to add to my Sabre pile yesterday for a single solitary dollar bill. It is in decent shape and doesn't look like it has been used much, although it has been sharpened.

Posted: **Sun Mar 21, 2021 9:45 pm**

OLDE CUTLER wrote: ↑Sun Mar 21, 2021 4:21 pm I picked up this fishing knife to add to my Sabre pile yesterday for a single solitary dollar bill. It is in decent shape and doesn't look like it has been used much, although it has been sharpened.

IMG_4215.JPG
IMG_4216.JPG

Nice one, OC

All About Pocket Knives

Sabre Pocket Knife

Re: Sabre Pocket Knife

Re: Sabre Pocket Knife

Re: Sabre Pocket Knife

Re: Sabre Pocket Knife

Re: Sabre Pocket Knife

Re: Sabre Pocket Knife

Re: Sabre Pocket Knife

Re: Sabre Pocket Knife

Re: Sabre Pocket Knife

Re: Sabre Pocket Knife

Re: Sabre Pocket Knife

Re: Sabre Pocket Knife

Re: Sabre Pocket Knife

Re: Sabre Pocket Knife

Re: Sabre Pocket Knife

Re: Sabre Pocket Knife

Re: Sabre Pocket Knife

Re: Sabre Pocket Knife

Re: Sabre Pocket Knife

Re: Sabre Pocket Knife

Re: Sabre Pocket Knife

Re: Sabre Pocket Knife