Page 2 of 3
Re: Pull Ball Switch Blade Knives
Posted: Mon May 05, 2014 3:30 pm
by ozzie marie
rooster,
I love that thing
Keith
Re: Pull Ball Switch Blade Knives
Posted: Mon May 05, 2014 3:58 pm
by roostershooter
Thanks Keith, its a great little knife. At the bottom of the palm tree are the words
"Silver Springs".
Re: Pull Ball Switch Blade Knives
Posted: Mon May 05, 2014 8:59 pm
by Miller Bro's
Nice ones!
Re: Pull Ball Switch Blade Knives
Posted: Tue May 06, 2014 8:42 pm
by Nick
Hello Fellas- Here is the only Pull Ball I have, but I am hoping on getting more !!
Re: Pull Ball Switch Blade Knives
Posted: Tue May 06, 2014 10:51 pm
by Miller Bro's
Nice knife Nick
Re: Pull Ball Switch Blade Knives
Posted: Mon May 12, 2014 8:43 pm
by ozzie marie
This Stainless just arrived
Keith
Re: Pull Ball Switch Blade Knives
Posted: Mon May 12, 2014 10:14 pm
by MrBlister
NICE ern Keith !!!
HET
Re: Pull Ball Switch Blade Knives
Posted: Sat Jun 07, 2014 7:30 am
by Nick
Just picked up this a little while ago; paperwork,box,knife is great shape. Thanks for letting me share !
Re: Pull Ball Switch Blade Knives
Posted: Tue Jun 10, 2014 1:30 am
by ozzie marie
Nick,
That paperwork is a GREAT find!
Congrats
Keith
Re: Pull Ball Switch Blade Knives
Posted: Tue Jun 10, 2014 6:30 pm
by Nick
Thanks Keith I was excited when I saw it tucked away in the bottom of the box that the knife came delivered in. I was amazed, did not expect it. I do not think the seller knew it was there either. Thanks nice to hear from you sir !!
Re: Pull Ball Switch Blade Knives
Posted: Thu Apr 02, 2015 1:28 pm
by ozzie marie
After having no luck trying to purchase Nicks Pull Ball Instruction Sheet
I was able to acquire this Knife, Box & Instructions from Mark Erickson at the Badger Knife Show
Keith
Re: Pull Ball Switch Blade Knives
Posted: Wed Sep 14, 2016 10:08 pm
by ozzie marie
Here's one that I just added.
They sure packed the advertising on this one
Keith
Re: Pull Ball Switch Blade Knives
Posted: Wed Sep 14, 2016 10:34 pm
by MrBlister
good l@@ker there Keith . .
you got quite a pile now, i'd say \\
here my only one .. . a REM
HET
Re: Pull Ball Switch Blade Knives
Posted: Tue Sep 20, 2016 12:52 am
by 1967redrider
Here's one I have, stamped G. SCHRADE KNIFE CO. INC B'PORT. CT USA with patent dates on the pile side. If you sharped these too much the little finger attached to the ball-pull won't cover the tip, then the blade won't stay closed.
This one works perfectly.
Re: Pull Ball Switch Blade Knives
Posted: Sat Nov 12, 2016 9:56 pm
by ozzie marie
OK, I admit I have a problem
JCN Co. 12K Gold Plated
Keith
Re: Pull Ball Switch Blade Knives
Posted: Sun Nov 13, 2016 12:12 am
by knife7knut
Not quite a pull ball auto but rather a pull tab manual.Three of them have the pull on the end and two(English made)have a sliding pull button.
Re: Pull Ball Switch Blade Knives
Posted: Sat Feb 27, 2021 1:57 pm
by ozzie marie
Here's a few more I've added to the collection. Both purchased right here at AAPK.
An Orange from Lee's Knives
A Silver Springs Tourist Souvenir that was posted on this thread almost 7 years ago
Thanks Jim! (roostershooter)
Keith
Re: Pull Ball Switch Blade Knives
Posted: Sat Feb 27, 2021 3:50 pm
by edge213
ozzie marie wrote: ↑Sat Feb 27, 2021 1:57 pm
Here's a few more I've added to the collection. Both purchased right here at AAPK.
An Orange from Lee's Knives
Pull Ball Lee's Knives.JPG
A Silver Springs Tourist Souvenir that was posted on this thread almost 7 years ago
Thanks Jim! (roostershooter)
Pull Ball Roostershooter.JPG
Keith
I really like the one with the palm tree, very colorful.
Re: Pull Ball Switch Blade Knives
Posted: Sun Feb 28, 2021 9:05 pm
by goldwood
You gotta love those pull balls!
I have a dozen of those in my collection. I wanted to show two of my more unusual stampings. This is the only one that I have owned where the tang is stamped stainless and the handle is plastic. I have seen the where both the handles and blade are stainless.
I got this Case XX pull ball on eBay about 15 years ago. I only recognized it because of the rear tang stamp. Case tested was ground off the front side. I was told that this was because it was a factory second? I don't know for sure.
Re: Pull Ball Switch Blade Knives
Posted: Mon Mar 01, 2021 1:35 am
by Miller Bro's
Wow! Thanks for posting them
Re: Pull Ball Switch Blade Knives
Posted: Tue Mar 02, 2021 4:27 pm
by edge213
goldwood wrote: ↑Sun Feb 28, 2021 9:05 pm
You gotta love those pull balls!
I have a dozen of those in my collection. I wanted to show two of my more unusual stampings. This is the only one that I have owned where the tang is stamped stainless and the handle is plastic. I have seen the where both the handles and blade are stainless.
I got this Case XX pull ball on eBay about 15 years ago. I only recognized it because of the rear tang stamp. Case tested was ground off the front side. I was told that this was because it was a factory second? I don't know for sure.20210228_143915_resized (002).jpg
Cool collection.
Re: Pull Ball Switch Blade Knives
Posted: Tue Mar 02, 2021 5:04 pm
by wiseguy
goldwood wrote: ↑Sun Feb 28, 2021 9:05 pm
You gotta love those pull balls!
I have a dozen of those in my collection. I wanted to show two of my more unusual stampings. This is the only one that I have owned where the tang is stamped stainless and the handle is plastic. I have seen the where both the handles and blade are stainless.
I got this Case XX pull ball on eBay about 15 years ago. I only recognized it because of the rear tang stamp. Case tested was ground off the front side. I was told that this was because it was a factory second? I don't know for sure.20210228_143915_resized (002).jpg
Nice collection, do you have the one with the file across the blade spine? I’ve only seen 2 of them in 40 years but not lately
Re: Pull Ball Switch Blade Knives
Posted: Wed Mar 03, 2021 4:00 am
by goldwood
I don't have one with a file across the spine. I have only seen photos. Have you ever seen one like this before? Not mine, I got outbid on eBay by a large amount over 15 years ago.
Re: Pull Ball Switch Blade Knives
Posted: Wed Mar 03, 2021 4:58 am
by wiseguy
Wow ! That’s one I’ve not seen, is that scissor stamped on the tang ? I’d like to see the mark if possible. Thanks for sharing it !
Re: Pull Ball Switch Blade Knives
Posted: Wed Mar 03, 2021 4:34 pm
by goldwood
wiseguy wrote: ↑Wed Mar 03, 2021 4:58 am
Wow ! That’s one I’ve not seen, is that scissor stamped on the tang ? I’d like to see the mark if possible. Thanks for sharing it !
I don't have any other photos of that knife. That one sold on eBay in 2007 for $242.50. In the past 20 years, I have saved photos with the prices knives sold for in a folder for future reference. I can't remember for sure if it had a tang stamp. At that price, there is a good chance it had a stamp.