Page 9 of 10

Re: Let's See Your Camco Knives!

Posted: Sun Nov 19, 2023 11:45 pm
by New_Windsor_NY
This pocket knife arrived very recently in a group or lot of pocket knives that I purchased. This pocket knife now becomes my most recent example to be posted under this topic or thread. I did NOT purchase the group or lot of pocket knives to obtain this particular pocket knife. However, this pocket knife did turn out to be a keeper and it will be added to my general CAMCO (CAMILLUS) pocket knife collection. It is a CAMCO, one blade, one tang stamp, 3 1/8" closed, tip bolsters, lockback, pocket knife. The main blade front tang stamp says, "CAMCO (over) USA" If this pocket knife ever had any advertising on it, it is not there now. Overall, this pocket knife is in GOOD+ condition. It did require some minor cleaning.
I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

Re: Let's See Your Camco Knives!

Posted: Mon Nov 20, 2023 3:52 pm
by Vit_213
CAMCO Lockback! WOW! I haven't seen this before.

Re: Let's See Your Camco Knives!

Posted: Mon Nov 20, 2023 7:15 pm
by New_Windsor_NY
Vit_213 wrote: ↑Mon Nov 20, 2023 3:52 pm CAMCO.....
Vit_213, it came as a surprise to me also.
A VERY NICE surprise.

Re: Let's See Your Camco Knives!

Posted: Tue Nov 21, 2023 12:55 am
by GSPTOPDOG
New_Windsor_NY wrote: ↑Sun Nov 19, 2023 11:00 pm
GSPTOPDOG wrote: ↑Sun Nov 19, 2023 2:49 am Camco.....
TREMENDOUS TRIO, GSPTOPDOG. ::tu:: ::tu::
Thanks Skip! ::handshake::

Re: Let's See Your Camco Knives!

Posted: Wed Nov 22, 2023 1:12 am
by msteele6
Nice!

Re: Let's See Your Camco Knives!

Posted: Wed Nov 22, 2023 2:15 am
by New_Windsor_NY
msteele6 wrote: ↑Wed Nov 22, 2023 1:12 am Nice.....
If you're referring to my lockback CAMCO
pocket knife, I thank you, msteele6.🍻

Re: Let's See Your Camco Knives!

Posted: Fri Dec 08, 2023 12:51 am
by timber22
I was able to pick up 10 pocket knives this week. One is a Camco. This humble Barlow. Tight with great snap. I'll be carrying it.

Re: Let's See Your Camco Knives!

Posted: Fri Dec 08, 2023 1:02 am
by GSPTOPDOG
A few....

Re: Let's See Your Camco Knives!

Posted: Tue Dec 12, 2023 1:24 pm
by Waukonda
GSPTOPDOG wrote: ↑Fri Dec 08, 2023 1:02 amA few....
Nice little.grouping. Is the Benedictine and Julius Wile same knife different sides, and the other bartender knife plain with no inscription?

Re: Let's See Your Camco Knives!

Posted: Wed Dec 13, 2023 1:31 am
by GSPTOPDOG
Waukonda wrote: ↑Tue Dec 12, 2023 1:24 pm
GSPTOPDOG wrote: ↑Fri Dec 08, 2023 1:02 amA few....
Nice little.grouping. Is the Benedictine and Julius Wile same knife different sides, and the other bartender knife plain with no inscription?
Ike, the inscription has faded over time... much like my own youth and vigor... ::disgust:: .... :x ..... ::facepalm::

Re: Let's See Your Camco Knives!

Posted: Fri Apr 05, 2024 8:47 pm
by Gtrclktr-351
Just received my first two Camco knives. Both are pearloid advertising knives that I believe are from the 60s.
IMG_2293.jpeg
IMG_2294.jpeg

Re: Let's See Your Camco Knives!

Posted: Fri Apr 05, 2024 11:34 pm
by Ridgegrass
Nice. Maybe 50's ? J.O'.

Re: Let's See Your Camco Knives!

Posted: Sat Apr 06, 2024 12:30 am
by Vit_213
Gtrclktr-351 wrote: ↑Fri Apr 05, 2024 8:47 pm Both are pearloid advertising knives that I believe are from the 60s.
The first is #801, the second is probably #272. Both are Nu-pearl (synthetic). Both are 50s.

Re: Let's See Your Camco Knives!

Posted: Sat Apr 06, 2024 12:35 am
by bestgear
My solo Camco - part of my New Britain CT collection.

Re: Let's See Your Camco Knives!

Posted: Sat Apr 06, 2024 1:03 am
by Vit_213
bestgear wrote: ↑Sat Apr 06, 2024 12:35 am My solo Camco - part of my New Britain CT collection.
One of my favorite patterns! But this is already the 70s :)
In the 60s it looked like this

Re: Let's See Your Camco Knives!

Posted: Sat Apr 06, 2024 3:11 am
by Reverand
Gtrclktr-351 wrote: ↑Fri Apr 05, 2024 8:47 pm Just received my first two Camco knives. Both are pearloid advertising knives that I believe are from the 60s.
IMG_2293.jpegIMG_2294.jpeg
I have a similar Camco that I carry regularly. I got it from another member, but I don't recall whom. It might have been a POS exchange?
Anyway, it is a handy little knife!
IMG_1972.jpeg

Re: Let's See Your Camco Knives!

Posted: Sat Apr 06, 2024 4:00 am
by Gtrclktr-351
Vit_213 wrote: ↑Sat Apr 06, 2024 12:30 am The first is #801, the second is probably #272. Both are Nu-pearl (synthetic). Both are 50s.
Thanks for the information.

Re: Let's See Your Camco Knives!

Posted: Thu Apr 18, 2024 2:36 am
by GSPTOPDOG
Just picked this one up today... ::nod::

Re: Let's See Your Camco Knives!

Posted: Thu Apr 18, 2024 2:51 am
by edge213
GSPTOPDOG wrote: ↑Thu Apr 18, 2024 2:36 am Just picked this one up today... ::nod::
I dig it dog.
If it's for sale let me know.

Re: Let's See Your Camco Knives!

Posted: Thu Apr 18, 2024 3:24 am
by GSPTOPDOG
edge213 wrote: ↑Thu Apr 18, 2024 2:51 am
GSPTOPDOG wrote: ↑Thu Apr 18, 2024 2:36 am
Thanks David! ::handshake::

Re: Let's See Your Camco Knives!

Posted: Thu Apr 18, 2024 8:30 am
by Vit_213
GSPTOPDOG wrote: ↑Thu Apr 18, 2024 2:36 am Just picked this one up today... ::nod::
Camco + Santa Fe Stoneworks :shock:
I've never seen such a combination. Does anyone know the origin of this knife?

Re: Let's See Your Camco Knives!

Posted: Thu Apr 18, 2024 10:31 am
by bestgear
Vit_213 wrote: ↑Thu Apr 18, 2024 8:30 amCamco + Santa Fe Stoneworks
Vit - what did you see that makes you think Santa Fe Stoneworks? ::shrug::

Re: Let's See Your Camco Knives!

Posted: Thu Apr 18, 2024 1:24 pm
by New_Windsor_NY
GSPTOPDOG wrote: ↑Thu Apr 18, 2024 2:36 am Just.....
That one is a real LπŸ‘πŸ‘KER, GSPTOPDOG! ::tu:: ::tu::

Re: Let's See Your Camco Knives!

Posted: Thu Apr 18, 2024 1:36 pm
by doglegg
GSPTOPDOG wrote: ↑Thu Apr 18, 2024 2:36 am Just picked this one up today... ::nod::
Santa Fe Stone was the first thing that came to my mind. They worked a lot with Camillus so.... It is a cool looking knife.

Re: Let's See Your Camco Knives!

Posted: Thu Apr 18, 2024 2:56 pm
by Vit_213
bestgear wrote: ↑Thu Apr 18, 2024 10:31 am
Vit_213 wrote: ↑Thu Apr 18, 2024 8:30 amCamco + Santa Fe Stoneworks
Vit - what did you see that makes you think Santa Fe Stoneworks? ::shrug::
These handle scales are made by Santa Fe Stoneworks (Kaleidoscope series) ::nod::