Page 8 of 67

Re: Camillus 72 Clones

Posted: Tue Dec 10, 2019 1:45 am
by New_Windsor_NY
This is today's latest Camillus 72 variation that I acquired. Another McGrew ARKANSAS USA, 3 blade, swelled center, "whittler" pocket knife (my third). No evidence of ever having a blade etch. I gave it a gentle once over, but it was in very nice condition. These are MY pictures.

Re: Camillus 72 Clones

Posted: Tue Dec 10, 2019 9:16 pm
by TPK
New_Windsor_NY wrote: Tue Dec 10, 2019 1:45 am This is today's latest Camillus 72 variation that I acquired. Another McGrew ARKANSAS USA, 3 blade, swelled center, "whittler" pocket knife (my third). No evidence of ever having a blade etch. I gave it a gentle once over, but it was in very nice condition. These are MY pictures.
Looks great Skip! ::tu::

Re: Camillus 72 Clones

Posted: Tue Dec 10, 2019 9:27 pm
by New_Windsor_NY
TPK wrote: Tue Dec 10, 2019 9:16 pm
New_Windsor_NY wrote: Tue Dec 10, 2019 1:45 am This is today's latest Camillus 72 variation that I acquired. Another McGrew ARKANSAS USA, 3 blade, swelled center, "whittler" pocket knife (my third). No evidence of ever having a blade etch. I gave it a gentle once over, but it was in very nice condition. These are MY pictures.
Looks great Skip! ::tu::
Thank you Tom. ::handshake::

Re: Camillus 72 Clones

Posted: Tue Dec 10, 2019 9:56 pm
by doglegg
Received from Jerry today a little Wards Powr-Kraft 84-11. Thanks Jerry. ::handshake::
DSCN6137.JPG
DSCN6138.JPG

Re: Camillus 72 Clones

Posted: Tue Dec 10, 2019 10:02 pm
by New_Windsor_NY
doglegg wrote: Tue Dec 10, 2019 9:56 pm Received from Jerry today a little Wards Powr-Kraft 84-11. Thanks Jerry. ::handshake::
Very nice Floyd! ::tu::

Re: Camillus 72 Clones

Posted: Tue Dec 10, 2019 10:36 pm
by jerryd6818
Floyd, that looks better than the one I remember sending to you. Let me check and see if I sent the wrong one. ::rotflol::

Oh, now I see. You had it upside down.

Re: Camillus 72 Clones

Posted: Tue Dec 10, 2019 11:24 pm
by doglegg
On most days Jerry, I don't know which end is up. ::shrug::

Re: Camillus 72 Clones

Posted: Tue Dec 10, 2019 11:31 pm
by jerryd6818
Oh, don't worry Floyd. It just gets worse. ::uc::

Re: Camillus 72 Clones

Posted: Thu Dec 12, 2019 1:33 am
by New_Windsor_NY
Joining my Camillus 72 variation family today is another Schrade 863, 3 blade, swelled center, "whittler" pocket knife. It definitely needed a thorough cleaning, it received one. The "before" pictures are here: viewtopic.php?f=2&t=46672&start=1740#p777425
These are MY pictures.

Re: Camillus 72 Clones

Posted: Thu Dec 12, 2019 3:47 am
by New_Windsor_NY
Soon to join my illustrious family of Camillus 72 variations, is this Camillus 80. I don't anticipate having to do any kind of cleaning, as this knife looks to be in FANTASTIC condition. My first pattern 80 and I can't wait. I'll post MY pictures when I receive it. These are the seller's pictures.

Re: Camillus 72 Clones

Posted: Fri Dec 13, 2019 4:33 pm
by New_Windsor_NY
Yesterday, these three pocket knives found their way to my Camillus 72 variation collection. They are, (2) CRAFTSMAN 9494s and a BEAR MGC, Scout knife. The two CRAFTSMAN knives needed some cleaning, the BEAR MGC did not. I really don't see what all the fuss about the BEAR MGC is/was. All 3 blades have a snap that would embarrass a crocodile. None of the blades have any degree of wobble. The handles are in great shape. The blade etch is clear, clean and present. The tang stamp is clear and deep. Again, I do not intend to use the BEAR MGC, it's just for my collection. Bottom line, I'm pleased with it and that's all that really matters. These are MY pictures. Click on a picture to ENLARGE.

Re: Camillus 72 Clones

Posted: Fri Dec 13, 2019 4:57 pm
by jerryd6818
Skip, you're avoiding voicing any judgment of the Bear. Any particular reason? :mrgreen:

Re: Camillus 72 Clones

Posted: Fri Dec 13, 2019 5:32 pm
by New_Windsor_NY
jerryd6818 wrote: Fri Dec 13, 2019 4:57 pm Skip, you're avoiding voicing any judgment of the Bear. Any particular reason? :mrgreen:
Jerry, did you read my ENTIRE post? I believe I critiqued the BEAR MGC quite well.

Re: Camillus 72 Clones

Posted: Fri Dec 13, 2019 6:47 pm
by jerryd6818
I must have skimmed. No excuse sir.

Re: Camillus 72 Clones

Posted: Fri Dec 13, 2019 7:30 pm
by New_Windsor_NY
jerryd6818 wrote: Fri Dec 13, 2019 6:47 pm I must have skimmed. No excuse sir.
::handshake::

Re: Camillus 72 Clones

Posted: Fri Dec 13, 2019 9:08 pm
by doglegg
Pretty good looking trio, Skip. And sounds like you got a good Bear. Congrats on the knives.

Re: Camillus 72 Clones

Posted: Fri Dec 13, 2019 10:10 pm
by New_Windsor_NY
doglegg wrote: Fri Dec 13, 2019 9:08 pm Pretty good looking trio, Skip. And sounds like you got a good Bear. Congrats on the knives.
Thank you Floyd. ::tu::

Re: Camillus 72 Clones

Posted: Fri Dec 13, 2019 11:47 pm
by Vit_213
Hey guys, I don't understand you! The Bear does s..., but for some reason you are shy about openly talking about it ::shrug:: .

P.S. Ha-ha! AAPK banned the word "s h i t" :mrgreen:

Re: Camillus 72 Clones

Posted: Sat Dec 14, 2019 12:43 am
by New_Windsor_NY
Vit_213 wrote: Fri Dec 13, 2019 11:47 pm Hey guys, I don't understand you! The Bear does s..., but for some reason you are shy about openly talking about it ::shrug:: .

P.S. Ha-ha! AAPK banned the word "s h i t" :mrgreen:
I actually described my BEAR MGC in detail. If you read the entire post, you'll see that.
viewtopic.php?f=63&t=62956&start=195#p779076

Re: Camillus 72 Clones

Posted: Mon Dec 16, 2019 7:14 pm
by New_Windsor_NY
This Camillus 80 joined the Camillus 72 variation club today. No cleaning required at all. The photographs posted below were taken by me. Click on a picture to ENLARGE.

Re: Camillus 72 Clones

Posted: Mon Dec 16, 2019 8:49 pm
by doglegg
Lovely Skip. Love the jimping.

Re: Camillus 72 Clones

Posted: Mon Dec 16, 2019 8:51 pm
by New_Windsor_NY
doglegg wrote: Mon Dec 16, 2019 8:49 pm Lovely Skip. Love the jimping.
Thank you Floyd. I think it adds a touch of "class" to the knife. ::tu::

Re: Camillus 72 Clones

Posted: Mon Dec 16, 2019 9:23 pm
by jerryd6818
Ya gotta love 'em. They're a class 'A' piece of hardware.

Re: Camillus 72 Clones

Posted: Sat Dec 21, 2019 2:18 am
by New_Windsor_NY
Very soon, this pocket knife will be added to my collection. Yet another Camillus 72 variation, a FORGED USA pocket knife. FORGED USA was one of Sears Roebuck & Company's trademark names and was made for them by the Camillus Cutlery Company. When I receive it, I will give it the once over, take some pictures and post them in the appropriate location(s). Here's what it looks like now.

Re: Camillus 72 Clones

Posted: Sat Dec 21, 2019 2:49 am
by doglegg
Skip you got a good one there. And an early one I think. Really happy for you on this one. ::nod:: ::tu:: ::tu::