Page 8 of 65

Re: Camillus 72 Clones

Posted: Tue Dec 03, 2019 3:26 am
by doglegg
::tu:: ::tu:: ::handshake::

Re: Camillus 72 Clones

Posted: Tue Dec 03, 2019 12:47 pm
by Meridian_Mike
WOW.... that is a real beauty Skip!

This Ulster walked in to the office yesterday.... I think it's a #63....
It's not in too bad of a shape... needs some clean up...
IMG_5562.JPG
:D

Re: Camillus 72 Clones

Posted: Tue Dec 03, 2019 2:56 pm
by doglegg
Mike, that is a good visitor, I bet you make it feel at home. Those 63's all seem to be well made from the ones I have seen. Great pick up. You going to work on it? ::tu:: ::tu::

Re: Camillus 72 Clones

Posted: Tue Dec 03, 2019 3:00 pm
by Meridian_Mike
Yep, seems like a pretty solid knife.
Yep, I think I am just gonna clean it up and give it a good oiling.
I don't think I am going to mess with the blades any.

::tu::

Re: Camillus 72 Clones

Posted: Tue Dec 03, 2019 5:34 pm
by New_Windsor_NY
Meridian_Mike wrote: Tue Dec 03, 2019 12:47 pm WOW.... that is a real beauty Skip!

This Ulster walked in to the office yesterday.... I think it's a #63....
It's not in too bad of a shape... needs some clean up...
IMG_5562.JPG

:D
Thank you Mike. ::handshake:: That is a good looking Ulster knife. ::tu:: Look on the other side of the main blade to see if "63" is stamped on the tang. I like the Ulster 63 pattern. It's one of my favorite Camillus 72 variations. I have four Ulster 63s, three have the pattern # stamped and one does not have the pattern #. ::shrug::

Re: Camillus 72 Clones

Posted: Wed Dec 04, 2019 7:24 pm
by TPK
Nice knives Skip & Mike! ::tu:: ::tu:: They both have attractive handles! ::super_happy::

Re: Camillus 72 Clones

Posted: Wed Dec 04, 2019 7:29 pm
by New_Windsor_NY
Thank you Tom. ::handshake::

Re: Camillus 72 Clones

Posted: Thu Dec 05, 2019 7:06 pm
by New_Windsor_NY
These three, Camillus 72, variation pocket knives will soon be joining my collection. Two, MCGREW ARKANSAS, 3 blade "whittlers" (the first four pictures) and a POWR KRAFT 84-11, 3 blade "whittler" (the last two pictures). I don't know if either of the MCGREWs has a blade etch. It wasn't mentioned in either knife's description and I can't tell from the pictures. The POWR KRAFT knife looks like it is in great condition and besides the tang stamps, it does have an etch on the main blade. I will give all three the once over when I receive them. I will post MY pictures in the appropriate location(s). All the following pictures are the different seller's.

Re: Camillus 72 Clones

Posted: Thu Dec 05, 2019 7:22 pm
by TPK
New_Windsor_NY wrote: Thu Dec 05, 2019 7:06 pm These three, Camillus 72, variation pocket knives will soon be joining my collection. Two, MCGREW ARKANSAS, 3 blade "whittlers" (the first four pictures) and a POWR KRAFT 84-11, 3 blade "whittler" (the last two pictures). I don't know if either of the MCGREWs has a blade etch. It wasn't mentioned in either knife's description and I can't tell from the pictures. The POWR KRAFT knife looks like it is in great condition. I will give all three the once over when I receive them. I will post MY pictures in the appropriate location(s). All the following pictures are the seller's.
Nice find Skip!!! I'll call you "Skipper" ::sotb:: today cause that looks like the catch of the day! ::super_happy::

Re: Camillus 72 Clones

Posted: Thu Dec 05, 2019 7:29 pm
by New_Windsor_NY
TPK wrote: Thu Dec 05, 2019 7:22 pm
New_Windsor_NY wrote: Thu Dec 05, 2019 7:06 pm These three, Camillus 72, variation pocket knives will soon be joining my collection. Two, MCGREW ARKANSAS, 3 blade "whittlers" (the first four pictures) and a POWR KRAFT 84-11, 3 blade "whittler" (the last two pictures). I don't know if either of the MCGREWs has a blade etch. It wasn't mentioned in either knife's description and I can't tell from the pictures. The POWR KRAFT knife looks like it is in great condition. I will give all three the once over when I receive them. I will post MY pictures in the appropriate location(s). All the following pictures are the seller's.
Nice find Skip!!! I'll call you "Skipper" ::sotb:: today cause that looks like the catch of the day! ::super_happy::
Why thank you Gilligan, little buddy. ::handshake::

Re: Camillus 72 Clones

Posted: Thu Dec 05, 2019 7:38 pm
by TPK
New_Windsor_NY wrote: Thu Dec 05, 2019 7:29 pm
TPK wrote: Thu Dec 05, 2019 7:22 pm
New_Windsor_NY wrote: Thu Dec 05, 2019 7:06 pm These three, Camillus 72, variation pocket knives will soon be joining my collection. Two, MCGREW ARKANSAS, 3 blade "whittlers" (the first four pictures) and a POWR KRAFT 84-11, 3 blade "whittler" (the last two pictures). I don't know if either of the MCGREWs has a blade etch. It wasn't mentioned in either knife's description and I can't tell from the pictures. The POWR KRAFT knife looks like it is in great condition. I will give all three the once over when I receive them. I will post MY pictures in the appropriate location(s). All the following pictures are the seller's.
Nice find Skip!!! I'll call you "Skipper" ::sotb:: today cause that looks like the catch of the day! ::super_happy::
Why thank you Gilligan, little buddy. ::handshake::
I have a private island. ::super_happy:: ::tu::

Re: Camillus 72 Clones

Posted: Thu Dec 05, 2019 8:59 pm
by doglegg
Skip 3 good ones coming. I don't have one of the power craft ones yet. Still looking. ::tu:: ::tu::

Re: Camillus 72 Clones

Posted: Sat Dec 07, 2019 12:40 am
by New_Windsor_NY
doglegg wrote: Thu Dec 05, 2019 8:59 pm Skip 3 good ones coming. I don't have one of the power craft ones yet. Still looking. ::tu:: ::tu::
Thank you Floyd. :D

This afternoon I purchased this Schrade 863, 3 blade, swelled center, "whittler" pocket knife. Another Camillus 72 variation and another Schrade 863 for my collection. When I receive it, I'll give it a good cleaning and post MY pictures in the appropriate location(s). These pictures are the seller's.

Re: Camillus 72 Clones

Posted: Sat Dec 07, 2019 3:20 pm
by New_Windsor_NY
This Camillus 72 variation will soon be joining the family. My first and only, so far, BEAR MGC USA, 3 blade, swelled center, scout "whittler" pocket knife. It looks like it's in pretty good shape. When I receive it I'll give it the once over and post MY pictures in the appropriate location(s). These are the seller's pictures.

Re: Camillus 72 Clones

Posted: Sat Dec 07, 2019 11:04 pm
by Vit_213
I hope the BEAR MGC will not disappoint you, as it was with me ::td:: .

Re: Camillus 72 Clones

Posted: Sat Dec 07, 2019 11:33 pm
by New_Windsor_NY
Today, these two knives, both Camillus 72 variations, will be welcomed into my collection. Another McGrew ARKANSAS, 3 blade, swelled center, "whittler" pocket knife (first 3 pictures) and my first and only, so far, POWR-KRAFT 84-11, 3 blade, swelled center, "whittler" pocket knife (last 5 pictures). The barely visible remains of POWR-KRAFT etched on the main blade can still be seen. The McGrew needed a cleaning, the POWR-KRAFT did not. These are MY pictures. Click on a picture to ENLARGE.

Re: Camillus 72 Clones

Posted: Sat Dec 07, 2019 11:49 pm
by doglegg
Congrats Skip. There is a McGrew made for Chip Chat wood carvers, I think that is the name. You will have to watch for it. ::tu:: ::tu::

Re: Camillus 72 Clones

Posted: Sat Dec 07, 2019 11:56 pm
by New_Windsor_NY
doglegg wrote: Sat Dec 07, 2019 11:49 pm Congrats Skip. There is a McGrew made for Chip Chat wood carvers, I think that is the name. You will have to watch for it. ::tu:: ::tu::
Thank you Floyd. ::handshake:: Yes, that's the name. It's the 1953-1993, 40th anniversary knife (engraved on the blade). This one may have had a blade etch at one time, but not now. My other McGrew has "Hillbilly Classic" etched on the blade. I still have one more McGrew coming in the mail. It was "delivered" today, but it wasn't available for pickup when I was there. So I'll pick it up on Monday. Who knows, maybe I'll get lucky. ::tu::

Re: Camillus 72 Clones

Posted: Sun Dec 08, 2019 5:52 pm
by New_Windsor_NY
This Camillus 72 variation will soon join my collection . It's another Craftsman 9494, 3 blade, swelled center, "whittler" pocket knife. To say the description was vague is an understatement. I've included it just for kicks. The pictures aren't that good at all either. So basically, it's a mystery knife (as far as overall condition). When I receive it I'll give it the once over. I'll post MY pictures in the appropriate location(s). These pictures are the seller's.

There were 2 knives in the lot, I edited one out of the pictures. Here is the description:
"One of these is about 4" long and says Craftsman on it. It looks like it has 2 or 3 blades. I did not want to try to open it due to getting a cut on another one earlier! The other is about 2" long and is one blade. I cannot read the brand but it looks like the Craftsman. I'm not sure though. Please use the pics as a description as I just don't know much about these pocket knives."

Re: Camillus 72 Clones

Posted: Mon Dec 09, 2019 5:09 pm
by New_Windsor_NY
I picked up another Camillus 72 variation. Another 3 blade, swelled center, Craftsman 9494, "whittler" pocket knife. It looks like it's in pretty good shape. When I receive it, I'll check it out and clean it if necessary. I'll post MY pictures in the appropriate location(s). These are the seller's pictures.

Re: Camillus 72 Clones

Posted: Tue Dec 10, 2019 1:45 am
by New_Windsor_NY
This is today's latest Camillus 72 variation that I acquired. Another McGrew ARKANSAS USA, 3 blade, swelled center, "whittler" pocket knife (my third). No evidence of ever having a blade etch. I gave it a gentle once over, but it was in very nice condition. These are MY pictures.

Re: Camillus 72 Clones

Posted: Tue Dec 10, 2019 9:16 pm
by TPK
New_Windsor_NY wrote: Tue Dec 10, 2019 1:45 am This is today's latest Camillus 72 variation that I acquired. Another McGrew ARKANSAS USA, 3 blade, swelled center, "whittler" pocket knife (my third). No evidence of ever having a blade etch. I gave it a gentle once over, but it was in very nice condition. These are MY pictures.
Looks great Skip! ::tu::

Re: Camillus 72 Clones

Posted: Tue Dec 10, 2019 9:27 pm
by New_Windsor_NY
TPK wrote: Tue Dec 10, 2019 9:16 pm
New_Windsor_NY wrote: Tue Dec 10, 2019 1:45 am This is today's latest Camillus 72 variation that I acquired. Another McGrew ARKANSAS USA, 3 blade, swelled center, "whittler" pocket knife (my third). No evidence of ever having a blade etch. I gave it a gentle once over, but it was in very nice condition. These are MY pictures.
Looks great Skip! ::tu::
Thank you Tom. ::handshake::

Re: Camillus 72 Clones

Posted: Tue Dec 10, 2019 9:56 pm
by doglegg
Received from Jerry today a little Wards Powr-Kraft 84-11. Thanks Jerry. ::handshake::
DSCN6137.JPG
DSCN6138.JPG

Re: Camillus 72 Clones

Posted: Tue Dec 10, 2019 10:02 pm
by New_Windsor_NY
doglegg wrote: Tue Dec 10, 2019 9:56 pm Received from Jerry today a little Wards Powr-Kraft 84-11. Thanks Jerry. ::handshake::
Very nice Floyd! ::tu::