Page 7 of 8

Re: Holley Mfg. Co., Lakeville, Conn.

Posted: Fri Sep 20, 2019 5:43 pm
by BWT
Here is a little one I just picked up,2 1/4 inches. The pouch is worse for wear but the knife is in pretty good shape.

Re: Holley Mfg. Co., Lakeville, Conn.

Posted: Fri Sep 20, 2019 5:50 pm
by LongBlade
Wow - What a cool pattern and lovely knife Bill ::tu:: ::tu:: ... I think they call these little oval shaped handles knives “butter bean”.. and the 2 wharncliffe blades are very cool on this knife!!

Re: Holley Mfg. Co., Lakeville, Conn.

Posted: Fri Sep 20, 2019 7:17 pm
by danno50
Lovely pair of Holleys, Joe! ::tu::
Holy Smokes, Bill, that is a beautiful little knife! ::tu:: Love that kind of pearl.

Re: Holley Mfg. Co., Lakeville, Conn.

Posted: Fri Sep 20, 2019 8:29 pm
by BWT
Thanks Dan and Lee ::handshake::

Re: Holley Mfg. Co., Lakeville, Conn.

Posted: Sat Sep 21, 2019 12:30 am
by FRJ
Bill, that's a beautiful little knife. Glad you got such a little charmer.

Thank you, Dan.

Re: Holley Mfg. Co., Lakeville, Conn.

Posted: Sat Sep 21, 2019 10:30 am
by BWT
Thanks Joe I appreciate that.

Re: Holley Mfg. Co., Lakeville, Conn.

Posted: Wed Feb 19, 2020 4:49 pm
by peanut740
Holley Lakeside Conn.4 1/4" cigar jack.

Re: Holley Mfg. Co., Lakeville, Conn.

Posted: Wed Feb 19, 2020 5:10 pm
by stockman
Roger another nice one.

Harold

Re: Holley Mfg. Co., Lakeville, Conn.

Posted: Wed Feb 19, 2020 6:35 pm
by LongBlade
Sweet knife Roger ::tu:: ::tu:: ...
peanut740 wrote: Wed Feb 19, 2020 4:49 pm Holley Lakeside Conn.4 1/4" cigar jack.
I think you meant Lakeville rather than Lakeside :D ::handshake:: ...

Re: Holley Mfg. Co., Lakeville, Conn.

Posted: Wed Feb 19, 2020 6:55 pm
by TPK
Nice find Roger! ::tu:: :D Interesting jigging. :D

Re: Holley Mfg. Co., Lakeville, Conn.

Posted: Wed Feb 19, 2020 7:17 pm
by peanut740
LongBlade wrote: Wed Feb 19, 2020 6:35 pm Sweet knife Roger ::tu:: ::tu:: ...
peanut740 wrote: Wed Feb 19, 2020 4:49 pm Holley Lakeside Conn.4 1/4" cigar jack.
I think you meant Lakeville rather than Lakeside :D ::handshake:: ...
That I did Lee. ::handshake::

Re: Holley Mfg. Co., Lakeville, Conn.

Posted: Wed May 05, 2021 3:32 am
by stumpstalker
A friend sent me these photos of this Holley Balloon Pen he just acquired.

It was rusty and was at the bottom of a pile in box; he cleaned it up and says the snap is good.

Says it has bone handle covers.

According to Levine's GUIDE, Holley called them "Jenny Lind" knives.

Re: Holley Mfg. Co., Lakeville, Conn.

Posted: Wed May 05, 2021 12:32 pm
by Jacknifeben
All four blades tang stamped HOLLEY MFG. CO. LAKE VILLE. Hard to get all of that on these blades. Too bad one side cracked.

Re: Holley Mfg. Co., Lakeville, Conn.

Posted: Wed May 05, 2021 1:47 pm
by edge213
peanut740 wrote: Wed Feb 19, 2020 4:49 pm Holley Lakeside Conn.4 1/4" cigar jack.
Cool knife. Most of the Holleys that I've seen have been small ones.

Re: Holley Mfg. Co., Lakeville, Conn.

Posted: Thu May 06, 2021 2:45 am
by stumpstalker
I like the way that Holley characterizes its knives, at least as per its 1915 catalogue, e.g., "Michigan Pen"; "Handy Boy; "Shiner"; "Big President". It is quaint, vintage -- the antithesis of "Tactical".

The practice does not appear often with other knife manufacturers of the period, does it?

Exceptions to the rule of course do exist, e.g., Cattaraugus ("King of the Woods"); Robeson ("Our Leader"); Maher & Grosh ("Trapper's Buddy").

Doesn't it signal from the outset that a good knife is a friend?

You get the sizzle and the steak.

Re: Holley Mfg. Co., Lakeville, Conn.

Posted: Thu May 06, 2021 2:46 am
by stumpstalker
trying to delete a double post

Re: Holley Mfg. Co., Lakeville, Conn.

Posted: Tue Sep 21, 2021 3:40 am
by FRJ
Here's two Holleys I got at the NCCA knife show.

Re: Holley Mfg. Co., Lakeville, Conn.

Posted: Tue Sep 21, 2021 8:07 am
by Duffer
Joe beautiful Holley folders—nice going ::tu::

Re: Holley Mfg. Co., Lakeville, Conn.

Posted: Sun Aug 13, 2023 6:21 pm
by JohnR
Thanks to Roger Cunningham picked up a beautiful old Holley single blade sheepsfoot jack. Large knife at 4 1/4", great curved frame with dense deep black ebony covers, nice bar shield. Still has great snap and a lot of blade left, really well done swedge on the blade.

Re: Holley Mfg. Co., Lakeville, Conn.

Posted: Mon Aug 14, 2023 3:04 am
by Dan In MI
That is an exceptionally beautiful old knife, John. Congratulations!

Re: Holley Mfg. Co., Lakeville, Conn.

Posted: Mon Aug 14, 2023 3:26 am
by FRJ
Big beautiful Holley, John.

Love that curved Ebony handle and of course the sheepsfoot. ::tu:: ::tu::

Re: Holley Mfg. Co., Lakeville, Conn.

Posted: Mon Aug 14, 2023 2:06 pm
by doglegg
Exceptional knife JohnR.

Re: Holley Mfg. Co., Lakeville, Conn.

Posted: Mon Aug 14, 2023 4:11 pm
by Quick Steel
John, from beauty to history your knife has it all. ::tu::

Re: Holley Mfg. Co., Lakeville, Conn.

Posted: Sun Aug 20, 2023 11:06 am
by JohnR
Thank you all for the comments ::tu:: ::tu:: Joe, I love that curve to the handle also, really adds to the knife.

Re: Holley Mfg. Co., Lakeville, Conn.

Posted: Sun Aug 20, 2023 2:13 pm
by Ridgegrass
I wonder if the simple beauty of the lines in that ebony even occurred to the cutlers who designed and made it? It was a utilitarian item back then and it's function dictated it's form. Can we imagine they ever thought such items would wind up in showcases, commanding prices hundreds of times their original costs?
In today's collector world it seems form is the first consideration, something to catch the "eye" of a buyer, a buyer who likely will rarely or never employ the knife for it's intended function. Sure we use our knives, but its a good guess most knives we use are "EDC's" that don't measure up to showcase standards.
Back to whether the old makers knew they were creating little works of art. By comparison, as a movie fan, I don't think "Gone With The Wind" or "Casablanca" or "The Wizard OF Oz" were filmed with posterity as their main intent. They were just the latest entertainment, to last only until the next sensation came along. Maybe the thousands of knife patterns like the "1123" or the "King of the Woods" or the "72" that we all crave were just accidental and incidental art treasures for later generations.
Just some rambling thoughts brought on by a beautiful, ebony, curved-handled, sheep's-foot "tool" from a bygone era. (Wish it were mine!) J.O'.