All About Pocket Knives

All About Pocket Knives is a knife related resource center for buying, selling, researching, and discussing all things knives
http://www.allaboutpocketknives.com/knife_forum/

Corner of Lanyard Lane & Sheath Street

http://www.allaboutpocketknives.com/knife_forum/viewtopic.php?t=66731

Page 6 of 10

Re: Corner of Lanyard Lane & Sheath Street

Posted: Mon Aug 24, 2020 7:00 pm
by WillyCamaro
Lookin awesome Biggy ::tu:: .

Re: Corner of Lanyard Lane & Sheath Street

Posted: Mon Aug 24, 2020 7:45 pm
by TPK
bighomer wrote: ↑Mon Aug 24, 2020 3:26 pm I'm still playing with this stuff.
Hey cool! I like those small ones! ::tu:: ::nod::
Is there a Mask attached to one of them? ::hmm:: That's pretty different! ::nod:: That's an example of thinking outside the box! ::tu:: :D

Re: Corner of Lanyard Lane & Sheath Street

Posted: Mon Aug 24, 2020 7:57 pm
by bighomer
Well you see I was a red leg gun bunny in the army and can't hear shirt. The around the ear things interfers with my hearing aids so I made adjustments. ::tu:: ::handshake::
Thanks willy

Re: Corner of Lanyard Lane & Sheath Street

Posted: Tue Oct 20, 2020 9:20 pm
by Jtx
Made these today. I have been asked about the size of the loops on my fobs... these vary from 2 1/4" and 3 1/4".

Re: Corner of Lanyard Lane & Sheath Street

Posted: Tue Oct 20, 2020 9:22 pm
by doglegg
Those look good. ::nod::

Re: Corner of Lanyard Lane & Sheath Street

Posted: Tue Oct 20, 2020 9:24 pm
by Jtx
doglegg wrote: ↑Tue Oct 20, 2020 9:22 pm Those look good. ::nod::
Thank you doglegg ::handshake::

Re: Corner of Lanyard Lane & Sheath Street

Posted: Sun Nov 08, 2020 2:04 pm
by TPK
Jtx wrote: ↑Tue Oct 20, 2020 9:20 pm Made these today. I have been asked about the size of the loops on my fobs... these vary from 2 1/4" and 3 1/4".
Those are nice! ::nod:: ::tu::
::hmm:: Might have to try making some of those. ::nod::

Re: Corner of Lanyard Lane & Sheath Street

Posted: Sun Nov 08, 2020 2:20 pm
by Jtx
TPK wrote: ↑Sun Nov 08, 2020 2:04 pm
Jtx wrote: ↑Tue Oct 20, 2020 9:20 pm Made these today. I have been asked about the size of the loops on my fobs... these vary from 2 1/4" and 3 1/4".
Those are nice! ::nod:: ::tu::
::hmm:: Might have to try making some of those. ::nod::
Thanks TPK ::handshake:: I hope you do make some... be sure and show us a photo when you make them.

Re: Corner of Lanyard Lane & Sheath Street

Posted: Sun Nov 08, 2020 2:32 pm
by TPK
I finally got some knife slips made. ::ds:: I had two (first picture) that a friend gave to me :wink: but I needed some more because I usually have 4-5 knives in my pockets. ::super_happy::

So I have a few of them finished now in various sizes. (pictures 2, 3 + 4) :D
I cut em out & my daughter Lorelai sews em for me. ::tu:: ::super_happy::

And I have a few more (17) already cut out waiting to be sewn up.(pictures 5, 6 + 7) ::tu:: :D
And a lot of cloth left over for some more. :lol: ::super_happy::

Thanks for looking! ::handshake:: ::nod::

Re: Corner of Lanyard Lane & Sheath Street

Posted: Sun Nov 08, 2020 2:33 pm
by TPK
Jtx wrote: ↑Sun Nov 08, 2020 2:20 pm
TPK wrote: ↑Sun Nov 08, 2020 2:04 pm
Jtx wrote: ↑Tue Oct 20, 2020 9:20 pm Made these today. I have been asked about the size of the loops on my fobs... these vary from 2 1/4" and 3 1/4".
Those are nice! ::nod:: ::tu::
::hmm:: Might have to try making some of those. ::nod::
Thanks TPK ::handshake:: I hope you do make some... be sure and show us a photo when you make them.
Ok, will do Buddy! ::nod:: ::handshake::

Re: Corner of Lanyard Lane & Sheath Street

Posted: Thu Nov 12, 2020 3:05 pm
by Jtx
Some micro cord fobs I made this week.

Re: Corner of Lanyard Lane & Sheath Street

Posted: Thu Nov 12, 2020 9:03 pm
by TPK
Jtx wrote: ↑Thu Nov 12, 2020 3:05 pm Some micro cord fobs I made this week.
Wow! :shock: Sweeeeeeet! Those look Killer! ::tu:: Thanks for sharing those Buddy! ::handshake:: ::super_happy::
Those hard to tie? ::shrug:: You got a YouTube link for me on how to make them? ::shrug::

Re: Corner of Lanyard Lane & Sheath Street

Posted: Thu Nov 12, 2020 9:51 pm
by Jtx
TPK wrote: ↑Thu Nov 12, 2020 9:03 pm
Jtx wrote: ↑Thu Nov 12, 2020 3:05 pm Some micro cord fobs I made this week.
Wow! :shock: Sweeeeeeet! Those look Killer! ::tu:: Thanks for sharing those Buddy! ::handshake:: ::super_happy::
Those hard to tie? ::shrug:: You got a YouTube link for me on how to make them? ::shrug::
Thanks TPK. No, they aren't hard to tie, although the smaller cord makes the process go a little slower. I don't know of a utube video, but there probably is one.
I will make a fob right now and attach some photos that may help you more than my verbal instructions. I just tie the loop knot and then braid a simple cobra braid around the core strands. Braid down to the desired length, then turn it upside down and braid another row of cobra knots back up to the the beginning loop knot. Then, trim and burn the four ends. It is similar to the process that you would use for a king cobra bracelet braid. This micro cord melts quickly... doesn't take much heat to do the job.
Hope this helps. Let me know if you have any questions.

Re: Corner of Lanyard Lane & Sheath Street

Posted: Thu Nov 12, 2020 10:53 pm
by jmh58
Jtx wrote: ↑Thu Nov 12, 2020 3:05 pm Some micro cord fobs I made this week.
PM sent..

Re: Corner of Lanyard Lane & Sheath Street

Posted: Thu Nov 12, 2020 11:08 pm
by Jtx
jmh58 wrote: ↑Thu Nov 12, 2020 10:53 pm
Jtx wrote: ↑Thu Nov 12, 2020 3:05 pm Some micro cord fobs I made this week.
PM sent..
Sent you a reply through PM.

Re: Corner of Lanyard Lane & Sheath Street

Posted: Fri Nov 13, 2020 5:25 am
by TPK
Jtx wrote: ↑Thu Nov 12, 2020 9:51 pm
TPK wrote: ↑Thu Nov 12, 2020 9:03 pm
Jtx wrote: ↑Thu Nov 12, 2020 3:05 pm Some micro cord fobs I made this week.
Wow! :shock: Sweeeeeeet! Those look Killer! ::tu:: Thanks for sharing those Buddy! ::handshake:: ::super_happy::
Those hard to tie? ::shrug:: You got a YouTube link for me on how to make them? ::shrug::
Thanks TPK. No, they aren't hard to tie, although the smaller cord makes the process go a little slower. I don't know of a utube video, but there probably is one.
I will make a fob right now and attach some photos that may help you more than my verbal instructions. I just tie the loop knot and then braid a simple cobra braid around the core strands. Braid down to the desired length, then turn it upside down and braid another row of cobra knots back up to the the beginning loop knot. Then, trim and burn the four ends. It is similar to the process that you would use for a king cobra bracelet braid. This micro cord melts quickly... doesn't take much heat to do the job.
Hope this helps. Let me know if you have any questions.
I'll have to get some smaller cord to try this. Thanks for sharing! ::handshake:: ::tu:: ::super_happy::

Re: Corner of Lanyard Lane & Sheath Street

Posted: Fri Nov 13, 2020 12:57 pm
by Papa Bones
Great work all. ::tu:: ::tu::

Have you guys ever checked out Bored Paracord. They do a lot of videos and have a website also. I have no affiliation with them. Just passing on some info.

https://www.youtube.com/user/BoredParacord

Re: Corner of Lanyard Lane & Sheath Street

Posted: Fri Nov 13, 2020 8:40 pm
by TPK
Papa Bones wrote: ↑Fri Nov 13, 2020 12:57 pm Great work all. ::tu:: ::tu::

Have you guys ever checked out Bored Paracord. They do a lot of videos and have a website also. I have no affiliation with them. Just passing on some info.

https://www.youtube.com/user/BoredParacord
Thanks Buddy! I'll check that out! ::tu:: ::super_happy::

Re: Corner of Lanyard Lane & Sheath Street

Posted: Sat Nov 14, 2020 12:31 am
by Rossr
Made these up out of calf lace. Learned a good bit about how to do it too.

Re: Corner of Lanyard Lane & Sheath Street

Posted: Sat Nov 14, 2020 12:33 am
by Rossr
Heres a couple pocket knife slips I made and a lanyard I did on an easy open knife too.

Re: Corner of Lanyard Lane & Sheath Street

Posted: Sat Nov 14, 2020 12:55 am
by Jtx
Rossr wrote: ↑Sat Nov 14, 2020 12:33 am Heres a couple pocket knife slips I made and a lanyard I did on an easy open knife too.
Very nice leather work!!! ::tu::

Re: Corner of Lanyard Lane & Sheath Street

Posted: Sat Nov 14, 2020 1:14 am
by Rossr
Jtx wrote: ↑Sat Nov 14, 2020 12:55 am
Rossr wrote: ↑Sat Nov 14, 2020 12:33 am Heres a couple pocket knife slips I made and a lanyard I did on an easy open knife too.
Very nice leather work!!! ::tu::
Thank you kindly

Re: Corner of Lanyard Lane & Sheath Street

Posted: Sat Nov 14, 2020 1:28 pm
by jmh58
Rossr wrote: ↑Sat Nov 14, 2020 12:33 am Heres a couple pocket knife slips I made and a lanyard I did on an easy open knife too.
Nice leather work.. ::tu:: ::nod:: ::tu:: And that EO is SWEETT!!! ::super_happy::
John :D

Re: Corner of Lanyard Lane & Sheath Street

Posted: Sat Nov 14, 2020 3:19 pm
by Ripster
jmh58 wrote: ↑Sat Nov 14, 2020 1:28 pm
Rossr wrote: ↑Sat Nov 14, 2020 12:33 am Heres a couple pocket knife slips I made and a lanyard I did on an easy open knife too.
Nice leather work.. ::tu:: ::nod:: ::tu:: And that EO is SWEETT!!! ::super_happy::
John :D

John, that EO is Sweet . Got a bunch of EOs that will be getting some of these lanyards on them . And a couple lanyards will go for gifts to my young knifer that I’ve been hanging out with.
Rossr has been great to work with and am looking forward to getting these in the mail .
Take care out there and be safe.

Re: Corner of Lanyard Lane & Sheath Street

Posted: Sat Nov 14, 2020 3:25 pm
by Ripster
jmh58 wrote: ↑Sat Nov 14, 2020 1:28 pm
Rossr wrote: ↑Sat Nov 14, 2020 12:33 am Heres a couple pocket knife slips I made and a lanyard I did on an easy open knife too.
Nice leather work.. ::tu:: ::nod:: ::tu:: And that EO is SWEETT!!! ::super_happy::
John :D

John, that EO is Sweet . Got a bunch of EOs that will be getting some of these lanyards on them . And a couple lanyards will go for gifts to my young knifer that I’ve been hanging out with.
Rossr has been great to work with and am looking forward to getting these in the mail .
Take care out there and be safe.
All times are UTC
Page 6 of 10

Powered by phpBB® Forum Software © phpBB Limited