Page 6 of 8
Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Tue Jun 18, 2019 9:13 pm
by carrmillus
....that is one brand that is on my "bucket" list!!!!....great find!!!!..........

..........
Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Tue Jun 18, 2019 9:30 pm
by LongBlade
Great score John

... looks to be in great condition - not an easy find for an old Holley! Shield is cool and blade swedges are so crisp

...
Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Wed Jun 19, 2019 4:09 am
by Robo
FRJ wrote:Here's a nice old pearl sleaveboard whittler that has seen some time in the saddle. 3 9/16" closed.
Great looking knife--love the top-grind on the big blade! Thanks for sharing!
Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Wed Jun 19, 2019 10:42 am
by gsmith7158
That's a great one John!

Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Wed Jun 19, 2019 1:26 pm
by RobesonsRme.com
Beautiful old jack.
The shield reminds me of a sliding volume control on some electronic devises, as well as on computer screens for digital music and video apps.
Of course, such things didn't exist when the knife was made, so we probably shouldn't call it a "Slider Bar" shield.
Charlie Noyes
Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Wed Jun 19, 2019 11:07 pm
by JAMESC41001
Lots to like with that one John. I feel the same way about ebony jacks. Looking forward to seeing more pics.
Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Thu Jun 20, 2019 2:27 am
by doglegg
JohnR wrote:My kryptonite is large ebony jacks, they will be the death of my bank account. This 3 3/4" Holley popped up this morning, looks to be in high condition, full blades and that clip has an awesome swedge. Probably overpaid but this will be the first Holley in my collection and it looks to be a pretty nice one.
Will post pictures when it arrives.
JohnR, you "probably overpaid for this..." only if you're not pleased with it. And I think you are and should be. Such quality and condition is always satisfying.

Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Thu Jun 20, 2019 11:55 pm
by JohnR
Thank you for everyone's comments. Knife showed up and it is a nice example, one of the better Holley's I have seen, been lightly cleaned without rounding edges, full blades, crisp tang stamps, main negative is a fine pin crack on the pile side which I knew about from pictures.
Unfortunately I can't take good pictures for awhile, been battling knee pain for awhile and las night It totally let loose, excruciating pain, had MRI today and talking to surgeon tomorrow, hope I don't miss the Rendezvous.
Best pic I can do right now with a cell phone.
Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Fri Jun 21, 2019 12:43 am
by Duffer
John, that is pretty darn nice for a Holley! Hope everything with your knee works out favorably and you don’t experience to much pain and discomfort in the process

Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Fri Jun 21, 2019 12:44 am
by FRJ
John, I hope your knee gets healthy.
That is a fine looking Holley.
Thanks for showing it here.

Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Fri Jun 21, 2019 12:59 am
by JohnR
Thanks guys, just got the radiology report and have a root torn meniscus and some floaters, should be fixable. Soon as I can will take pictures of the knife, it deserves it.
Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Fri Jun 21, 2019 1:02 am
by doglegg
JohnR, sorry for the bum knee. I understand, I have 2 new ones. Money well spent. Glad you have that Holley to handle until you feel better.

Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Sat Jun 22, 2019 8:26 am
by JohnR
Was able to hobble around and take a few pics, for me the best part of this knife is the clip main with a swedge that goes almost tip tp tang, don't think I have another knife done this way in the collection. The shield is unique also. Blades are full, looks like had little use but has had rust cleaned off and does have pin crack on pile side.
Thanks for everyone's well wishes, had a positive doctors visit yesterday and may be able to avoid surgery, had a shot and start PT next week.
Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Sat Jun 22, 2019 4:57 pm
by peanut740
John

Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Sat Jun 22, 2019 5:28 pm
by FRJ
Beautiful knife, John and nice pictures. Thank you.
That swedge just flows in that last picture.

Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Sat Jun 22, 2019 8:00 pm
by JohnR
Thank you Joe and Roger, I got to experiment with lighting and exposure to get details like the swedge sharper and clearer.
Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Wed Jul 03, 2019 10:54 pm
by danno50
Very nice, John, and as Joe said, great pictures!

Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Wed Jul 03, 2019 11:09 pm
by JAMESC41001
Good news John and great knife!
Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Thu Jul 04, 2019 12:06 am
by LongBlade
Nice Holley John

... Somehow I missed this or saw it on another thread and commented

and hope your knee is coming along healing!!!
Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Thu Jul 04, 2019 11:45 am
by JohnR
LongBlade wrote:Nice Holley John

... Somehow I missed this or saw it on another thread and commented

and hope your knee is coming along healing!!!
Thank you all for the nice comments. Lee, thought the knee was going to be ok but it could not handle one day back at work before pain and swelling started up again so I am now waiting on a date for Doc to scope it and see what's going on and what he can fix.
Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Thu Jul 04, 2019 11:58 am
by gsmith7158
John I guess I haven't been paying attention lately. So sorry to hear about your mobility problems.Modern medicine does some amazing things these days so I hope you get fixed up pretty quick. All that stuff still hurts though. I wish you a speedy recovery. And what a great knife. At least knee problems haven't affected your Knife eye.

Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Wed Jul 24, 2019 11:22 pm
by FRJ
Here's a little Holley Boys Knife I got in today.
It's in great condition as is its big brother that I am showing in comparison.
While these two were catching frogs their older, more sophisticated sibling was
catching trout on river.
Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Thu Jul 25, 2019 10:58 am
by JohnR
Joe, very nice Holley's, love the boys knife with its bigger brother, quite a pair to have in a collection.
Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Thu Jul 25, 2019 1:02 pm
by royal0014
Wow! Beautiful Hollies ....
Re: Holley Mfg. Co., Lakeville, Conn.
Posted: Thu Jul 25, 2019 6:19 pm
by FRJ
Thank you, guys.
