Page 6 of 6
Re: Celluloid Handles
Posted: Sat Dec 28, 2019 2:26 am
by FRJ
Here's a couple of little Robesons. 2 13/16" closed, each.
A very special Cut. Co., Paul.

Re: Celluloid Handles
Posted: Sat Dec 28, 2019 4:39 am
by knife7knut
edge213 wrote: ↑Wed Oct 09, 2019 12:19 am
Unknowns20191001_162221.jpg
The unknowns look a lot like Imperials.
Re: Celluloid Handles
Posted: Sat Dec 28, 2019 5:17 am
by edge213
knife7knut wrote: ↑Sat Dec 28, 2019 4:39 am
edge213 wrote: ↑Wed Oct 09, 2019 12:19 am
Unknowns20191001_162221.jpg
The unknowns look a lot like Imperials.
Thanks. I thought the same.
Re: Celluloid Handles
Posted: Tue Feb 04, 2020 5:53 pm
by OLDE CUTLER
I found this celluloid Imperial last weekend at the fleamarket for a dollar bill. Some real colorful celluloid from about 1930 something? It is a 3 inch tip bolster stainless jack.
Re: Celluloid Handles
Posted: Tue Feb 04, 2020 8:53 pm
by Old Folder
I've had this little "Canton Cutlery Co" pen knife for many years. Canton OH USA. c-1879-1930.
Probably a Christmas gift for employees.
98 Year old stable celluloid advertiser and still mint quality.
Re: Celluloid Handles
Posted: Tue Feb 04, 2020 10:56 pm
by BWT
Quite a find for a dollar OC

Re: Celluloid Handles
Posted: Tue Feb 04, 2020 10:58 pm
by BWT
That a really good looking knife Dan, great condition, thanks for sharing!!
Re: Celluloid Handles
Posted: Wed Feb 05, 2020 12:13 am
by cody6268
That's one of the few Canton Cutlery knives I have seen that wasn't X-rated. I love the dogs on it.
Re: Celluloid Handles
Posted: Wed Feb 05, 2020 1:30 am
by KnifeSlinger#81
Nice examples being shown by everybody. I think celluloid is underrated, but considering its volatile nature I can understand why. I like it though.
Here's some 1950's (most likely) butter & molasses.
Re: Celluloid Handles
Posted: Wed Feb 05, 2020 5:13 pm
by Old Folder
BWT wrote: ↑Tue Feb 04, 2020 10:58 pm
That a really good looking knife Dan, great condition, thanks for sharing!!
Thank you Bill

.
Re: Celluloid Handles
Posted: Wed Feb 05, 2020 5:42 pm
by Old Folder
cody6268 wrote: ↑Wed Feb 05, 2020 12:13 am
That's one of the few Canton Cutlery knives I have seen that wasn't X-rated. I love the dogs on it.
I have read that many cutlery companies produced very risque - suggestive pictures and were implanted most often within celluloid handles during the late 1800s and progressing well into the early 1900s.
Many of these well known cutlery companies would not put their manufacturer name on the tang stamp for fear that it would cause a stir and effect their selling. However, "Canton Cutlery Co." was not intimidated by this phenomenon and went full speed ahead.

I have numerous risque folders with no Mfg. on blades. I assume they were mostly made in the USA.
Re: Celluloid Handles
Posted: Thu Feb 06, 2020 6:54 pm
by michaelspayth
edge213 wrote: ↑Wed Oct 09, 2019 12:19 am
Unknowns20191001_162221.jpg
A few similarities.
Re: Celluloid Handles
Posted: Thu Feb 06, 2020 7:24 pm
by samb1955
Old Folder wrote: ↑Wed Feb 05, 2020 5:42 pm
cody6268 wrote: ↑Wed Feb 05, 2020 12:13 am
That's one of the few Canton Cutlery knives I have seen that wasn't X-rated. I love the dogs on it.
I have read that many cutlery companies produced very risque - suggestive pictures and were implanted most often within celluloid handles during the late 1800s and progressing well into the early 1900s.
Many of these well known cutlery companies would not put their manufacturer name on the tang stamp for fear that it would cause a stir and effect their selling. However, "Canton Cutlery Co." was not intimidated by this phenomenon and went full speed ahead.

I have numerous risque folders with no Mfg. on blades. I assume they were mostly made in the USA.
Pictures please, pretty please!
Re: Celluloid Handles
Posted: Thu Feb 06, 2020 10:11 pm
by Old Folder
samb1955 wrote: ↑Thu Feb 06, 2020 7:24 pm
Old Folder wrote: ↑Wed Feb 05, 2020 5:42 pm
cody6268 wrote: ↑Wed Feb 05, 2020 12:13 am
That's one of the few Canton Cutlery knives I have seen that wasn't X-rated. I love the dogs on it.
I have read that many cutlery companies produced very risque - suggestive pictures and were implanted most often within celluloid handles during the late 1800s and progressing well into the early 1900s.
Many of these well known cutlery companies would not put their manufacturer name on the tang stamp for fear that it would cause a stir and effect their selling. However, "Canton Cutlery Co." was not intimidated by this phenomenon and went full speed ahead.

I have numerous risque folders with no Mfg. on blades. I assume they were mostly made in the USA.
Pictures please, pretty please!
I'll take some pictures later today samb1955 and post them.
I think I have 5 or 6 with no Mfg. on blades.
Re: Celluloid Handles
Posted: Fri Feb 07, 2020 3:28 am
by Old Folder
Old Folder wrote: ↑Thu Feb 06, 2020 10:11 pm
samb1955 wrote: ↑Thu Feb 06, 2020 7:24 pm
Old Folder wrote: ↑Wed Feb 05, 2020 5:42 pm
I have read that many cutlery companies produced very risque - suggestive pictures and were implanted most often within celluloid handles during the late 1800s and progressing well into the early 1900s.
Many of these well known cutlery companies would not put their manufacturer name on the tang stamp for fear that it would cause a stir and effect their selling. However, "Canton Cutlery Co." was not intimidated by this phenomenon and went full speed ahead.

I have numerous risque folders with no Mfg. on blades. I assume they were mostly made in the USA.
Pictures please, pretty please!
I'll take some pictures later today samb1955 and post them.
I think I have 5 or 6 with no Mfg. on blades.
Here are the folders that have been requested.
Time is taking its toll on the celluloid though. For their age however...not bad. I keep them segregated from all others. (No, not because of content).
No Mfg. on blades with the exception of the last knife on your facing right

which I had to censor myself.
Even in the early days, censorship was obviously used to block something from being read, heard, or seen. If the word got into the press that so and so knife company was selling pornographic knives it could possibly result in a business failure.
The far right knife is marked:
"Johnston USA" It dates from 1945-1950. Johnston was sold to "Colonial" which had many trade marks.
Re: Celluloid Handles
Posted: Sat Feb 22, 2020 6:51 am
by Old Folder
Case also played a part in "Photo Art" knives in the 1930s and 1940s.
Re: Celluloid Handles
Posted: Thu Mar 19, 2020 7:57 pm
by edge213
Syracuse Knife Co.
Re: Celluloid Handles
Posted: Tue Jun 23, 2020 2:20 am
by michaelspayth
Mostly celluloid handles.