Page 47 of 59
Re: Knives Made Before The Year 1960
Posted: Sun Jun 03, 2018 2:39 pm
by jerryd6818
Dimitri - What's the closed length on that Ulster Dog Leg Jack? It looks very much like my #53 Camillus Dog Leg Jack (3" closed). I've only seen the two 53's I have and pictures of one more. It has a long line but is not in any of the catalogs I have access to. The handle material would seem to make it late 1950's - very early 1960's. That's the only gap in the catalogs I have access to that fits the knives I have.

Re: Knives Made Before The Year 1960
Posted: Sun Jun 03, 2018 2:45 pm
by BWT
Miller Bro's wrote:Here's a few more......
Nice knives Dimitri, the Ulster is

Re: Knives Made Before The Year 1960
Posted: Sun Jun 03, 2018 7:52 pm
by BWT
LongBlade wrote:BWT wrote:LongBlade wrote:I had been wanting a George Woodhead which I found a couple weeks ago. It is one of my oldest and has what looks like maybe some old type of horn, and rare.
That is a nice Woodhead too Bill

and forgot to mention it as I was so focused on the Bud Brand
Not sure I showed this Woodhead combo here on this thread - a Woodhead Bowie along with a swell-center pen... Now if I could find a Barnes folder to go with my dagger - I saw some Barnes folders recently but I didn't think they were in great condition especially coupled to the price being asked... patience is a virtue in collecting
Final Open Blades DSCN3288 2.JPG
Very nice Lee, two Woodheads, thanks for sharing!!! Like the MOP.
Re: Knives Made Before The Year 1960
Posted: Sun Jun 03, 2018 9:41 pm
by Miller Bro's
Thanks Dave, and Dan
jerryd6818 wrote:Dimitri - What's the closed length on that Ulster Dog Leg Jack? It looks very much like my #53 Camillus Dog Leg Jack (3" closed). I've only seen the two 53's I have and pictures of one more. It has a long line but is not in any of the catalogs I have access to. The handle material would seem to make it late 1950's - very early 1960's. That's the only gap in the catalogs I have access to that fits the knives I have.

Jerry, it 3 1/4" closed, I will check when I have time and see if I have a 53
BWT wrote:Nice knives Dimitri, the Ulster is

Thanks Bill

Re: Knives Made Before The Year 1960
Posted: Sun Jun 03, 2018 11:33 pm
by KnifeSlinger#81
Early schrade walden 836 whittler, very well made knife.
Re: Knives Made Before The Year 1960
Posted: Mon Jun 04, 2018 12:35 am
by RobesonsRme.com
Dimitri said he was waiting for me to post my Terrier knives in this thread.
For those that might not be aware, Terrier Cutlery Company knives were made, as a premium brand I think, by The Robeson Cutlery Company beginning in 1910 and they stopped producing them in 1916, so any Terrier marked knife is now about one-hundred-two to one-hundred-eight years old.
Here are the ones I have.
Charlie Noyes
Re: Knives Made Before The Year 1960
Posted: Mon Jun 04, 2018 12:38 am
by gsmith7158
Fabulous knives Charlie! Just don't get much better than that.

Re: Knives Made Before The Year 1960
Posted: Mon Jun 04, 2018 12:40 am
by RobesonsRme.com
Next lot.
Re: Knives Made Before The Year 1960
Posted: Mon Jun 04, 2018 12:43 am
by Miller Bro's
Re: Knives Made Before The Year 1960
Posted: Mon Jun 04, 2018 12:54 am
by RobesonsRme.com
A few more.
Re: Knives Made Before The Year 1960
Posted: Mon Jun 04, 2018 1:08 am
by woodwalker
Beautiful knives Charlie!! Absolutely stunning!!

Re: Knives Made Before The Year 1960
Posted: Mon Jun 04, 2018 1:16 am
by RobesonsRme.com
Here are some Terrier knives that sold on Ebay, but not to me. Hopefully, none of them belong to anyone here.
Re: Knives Made Before The Year 1960
Posted: Mon Jun 04, 2018 1:19 am
by RobesonsRme.com
More
Re: Knives Made Before The Year 1960
Posted: Mon Jun 04, 2018 2:00 am
by LongBlade
Thanks Dimitri, Dan and Bill

... I think to find a pocket knife from the old Sheffield companies which made Bowies/Daggers on a predominate basis - On the other hand I have an early LF&C Hunter but in this case it was easier to find a pocket knife to go along with it
Dimitri - Nice knives and beautiful bone on the Ulster and Challenge

... That Empire peanut jack looks familiar

- I have the same exact Empire with same celluloid as seen below

... I thought it was starting to outgas based on the few bronze spots under the celluloid covers when I found it 3 years ago but it has never progressed any further... of course it has its own special storage area and lives by itself
Paul - That is a sweet looking Schrade whittler

...
Charlie - Your collection of Terrier knives certainly is stunning

... One can see why, as you note, they were considered a premium brand of Robeson... and there is just something about that worm groove bone I always find so appealing.. Thanks for sharing them!!
Re: Knives Made Before The Year 1960
Posted: Mon Jun 04, 2018 2:28 am
by Colonel26
Charlie, those terrier knives are outstanding.
Re: Knives Made Before The Year 1960
Posted: Mon Jun 04, 2018 3:41 am
by Miller Bro's
Very nice Lee
Definitely the double to my knife, my cell is very stable in fact I don't recall ever seeing an old Empire knife with celluloid handles outgass.
Re: Knives Made Before The Year 1960
Posted: Mon Jun 04, 2018 3:59 pm
by BWT
RobesonsRme.com wrote:Next lot.
Beautiful beautiful knives Charlie, really enjoyed looking at them

Very nice collection.
Very nice Lee!!!
Re: Knives Made Before The Year 1960
Posted: Mon Jun 04, 2018 7:25 pm
by KnifeSlinger#81
A fine collection you have Charlie. I really like that stockman, it's kind of different.
Re: Knives Made Before The Year 1960
Posted: Mon Jun 04, 2018 8:26 pm
by RobesonsRme.com
Thanks everyone.
They are hard to find and I've missed some very nice ones on Ebay. That jumbo sleeveboard whittler is the one I regret most.
Charlie
Re: Knives Made Before The Year 1960
Posted: Mon Jun 04, 2018 9:00 pm
by BWT
A few more
J Nowill doesn't have England on the tang so it should be before 1960,still in business I believe, Finzers was in business late 1800 till early 1900s. Warranted Quality no info but it was inexpensive and I like the handles, I'm sure before 1960.
Re: Knives Made Before The Year 1960
Posted: Mon Jun 04, 2018 10:08 pm
by gsmith7158
Some great oldies there Bill!

Re: Knives Made Before The Year 1960
Posted: Mon Jun 04, 2018 10:20 pm
by FRJ
A very nice group of knives, Bill.

Re: Knives Made Before The Year 1960
Posted: Mon Jun 04, 2018 10:23 pm
by Miller Bro's
Looking good Bill, really like that stainless steel Challenge

Re: Knives Made Before The Year 1960
Posted: Mon Jun 04, 2018 10:45 pm
by BWT
Thanks Joe, Greg and Dimitri.
Re: Knives Made Before The Year 1960
Posted: Mon Jun 04, 2018 10:56 pm
by Miller Bro's
Here's a few tool kit knife sets I have.......