GEC "PPP" Designation
- XX Case XX
- Posts: 3577
- Joined: Sat Oct 31, 2015 7:24 pm
- Location: California
GEC "PPP" Designation
There's an active post here on this site about a Case "Prototype" etching on the main blade. The discussion kind of took a left turn and folks were discussing possible marketing schemes used to make a knife seem more valuable than it really is.
The use of etchings such as "Prototype", "First Production Run", and others were pointed out. So here's my question on that subject:
Where does GEC's "PPP" designation fit into this discussion? Take the new #43 Trapper. The Tidioute Brand that comes in Frontier Bone, Red Rust Bone, and Canvas Micarta all come with that PPP on the backside of the blade. You can't get one that doesn't have that etching.
The Northfield ones don't have it but all the others do. So based on the discussions about that Case prototype etching, do these new #43 GEC's fit into that category as well?
__________
Mike
The use of etchings such as "Prototype", "First Production Run", and others were pointed out. So here's my question on that subject:
Where does GEC's "PPP" designation fit into this discussion? Take the new #43 Trapper. The Tidioute Brand that comes in Frontier Bone, Red Rust Bone, and Canvas Micarta all come with that PPP on the backside of the blade. You can't get one that doesn't have that etching.
The Northfield ones don't have it but all the others do. So based on the discussions about that Case prototype etching, do these new #43 GEC's fit into that category as well?
__________
Mike
"If there are no Dogs in Heaven, then when I die, I want to go where they went". Will Rogers
I work hard so my Dog can have a better life...
I work hard so my Dog can have a better life...
- jerryd6818
- Gold Tier
- Posts: 39184
- Joined: Sun Jan 04, 2009 5:23 am
- Location: The middle of the top of a bastion of Liberalism.
Re: GEC "PPP" Designation
It means "Pattern Production Premiere".
Forged on the anvil of discipline.
The Few. The Proud.
Jerry D.
This country has become more about sub-groups than about it's unity as a nation.
"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
The Few. The Proud.
Jerry D.
This country has become more about sub-groups than about it's unity as a nation.
"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
- XX Case XX
- Posts: 3577
- Joined: Sat Oct 31, 2015 7:24 pm
- Location: California
Re: GEC "PPP" Designation
I know what it means, but the question I was asking was, does that etching fall into the same category as the others stated in the post about the prototype etching on that Case knife?jerryd6818 wrote:It means "Pattern Production Premiere".
__________
Mike
"If there are no Dogs in Heaven, then when I die, I want to go where they went". Will Rogers
I work hard so my Dog can have a better life...
I work hard so my Dog can have a better life...
- Beavertail
- Posts: 1195
- Joined: Sun Feb 24, 2008 9:47 pm
- Location: Way down south in Dixie
Re: GEC "PPP" Designation
Yep,Just another way to make the buyer think he's getting a one of a kind rarity.
Tim
- Railsplitter
- Gold Tier
- Posts: 3193
- Joined: Wed Oct 17, 2007 10:43 pm
Re: GEC "PPP" Designation
The PPP doesn't mean much to me but I think it might come in handy several years from now. Especially on knife forums like this one. Somebody might want to know when a pattern was first released and that can be a little tricky to look up on the GEC website. If somebody has the pattern with a PPP etch they could simply post a couple pics and the question is answered.
Only one variant can truly be the "Premier". Considering that more than one variant has the etch, it screams marketing gimmick in my opinion.
Only one variant can truly be the "Premier". Considering that more than one variant has the etch, it screams marketing gimmick in my opinion.
Rick T.
"My knife money maketh itself wings!" mb>
Proud member of the Buck Collectors Club Inc.
"My knife money maketh itself wings!" mb>
Proud member of the Buck Collectors Club Inc.
- Beavertail
- Posts: 1195
- Joined: Sun Feb 24, 2008 9:47 pm
- Location: Way down south in Dixie
- TwoFlowersLuggage
- Posts: 3113
- Joined: Sun Nov 26, 2017 8:18 pm
- Location: Stuck in traffic on a highway in Southern California
Re: GEC "PPP" Designation
I assume that is a fancy way to say "First Run"? Sales & Marketing dweebs ruin everything. The universe would be a better place if Sales & Marketing departments did not exist. Of course, I also say the same thing about Accounting, Finance, Legal, HR, Compliance, Regulatory, or any other department not involved in either designing the product, making the product or directly helping those people design & make the product...
"The Luggage had a straightforward way of dealing with things between it and its intended destination: it ignored them." -Terry Pratchett
- Mumbleypeg
- Gold Tier
- Posts: 13468
- Joined: Fri Apr 18, 2014 1:28 am
- Location: Republic of Texas
Re: GEC "PPP" Designation
At one time in my career I was in marketing. I thought marketing and sales steered the ship. Then I moved to Operations, and there was where I learned marketing's steering wheel isn't connected to the ship's rudder!TwoFlowersLuggage wrote:I assume that is a fancy way to say "First Run"? Sales & Marketing dweebs ruin everything. The universe would be a better place if Sales & Marketing departments did not exist. Of course, I also say the same thing about Accounting, Finance, Legal, HR, Compliance, Regulatory, or any other department not involved in either designing the product, making the product or directly helping those people design & make the product...
Ken
Member AKTI, TSRA, NRA.
If your religion requires that you hate someone, you need a new religion.
When the people fear their government, that is tyranny. When government fears the people, that is freedom.
https://www.akti.org/
If your religion requires that you hate someone, you need a new religion.
When the people fear their government, that is tyranny. When government fears the people, that is freedom.
https://www.akti.org/
- Tsar Bomba
- Posts: 3628
- Joined: Fri Jan 30, 2015 5:14 am
- Contact:
Re: GEC "PPP" Designation
Case, Queen, et al. seem to use "First Run" to signify the first knives off the line of a particular year's pattern, although they may have used them for newly-premiering knives as well like GEC does with the "PPP" etch. I think GEC only puts the PPP on the very first variants of the same pattern (note that on the 43s, as well as the 18s which was the last new pattern I purchased, the PPP is only on the Tidioute knives and not the Northfield brand). I've noticed NF tends to come after Tidioute if GEC is running both brand names during production. It's probably not a hard and fast rule but I have seen it trend that way.TwoFlowersLuggage wrote:I assume that is a fancy way to say "First Run"? Sales & Marketing dweebs ruin everything. The universe would be a better place if Sales & Marketing departments did not exist. Of course, I also say the same thing about Accounting, Finance, Legal, HR, Compliance, Regulatory, or any other department not involved in either designing the product, making the product or directly helping those people design & make the product...
That being said, in the long run I doubt the "PPP" stamp itself will be the driver of any particular value increases compared to desirable handle materials or long-anticipated patterns (I'm thinking large copperhead here). If anything, the "pete and repeat" SFO knives (TC Barlows, 77 NF Barlows, Northwoods) are the ones that see the biggest bumps next to the exotic handle materials like mammoth, abalone, etc.
Everything's better with a Barlow
- jerryd6818
- Gold Tier
- Posts: 39184
- Joined: Sun Jan 04, 2009 5:23 am
- Location: The middle of the top of a bastion of Liberalism.
Re: GEC "PPP" Designation
No offense intended. I didn't get that out of your post.XX Case XX wrote:I know what it means, but the question I was asking was, does that etching fall into the same category as the others stated in the post about the prototype etching on that Case knife?jerryd6818 wrote:It means "Pattern Production Premiere".
__________
Mike
Forged on the anvil of discipline.
The Few. The Proud.
Jerry D.
This country has become more about sub-groups than about it's unity as a nation.
"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
The Few. The Proud.
Jerry D.
This country has become more about sub-groups than about it's unity as a nation.
"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
- XX Case XX
- Posts: 3577
- Joined: Sat Oct 31, 2015 7:24 pm
- Location: California
Re: GEC "PPP" Designation
Jerry no worries. I took no offense Sir. I just got to thinking about that "PPP" etch on the new #43's and the past #18's that GEC made and was wondering if some of you more experienced fellas thought it compared to "prototype & first run etches" on other knives is all. I know some of the guys here don't like those etches on the blade.jerryd6818 wrote:No offense intended. I didn't get that out of your post.
_________
Mike
"If there are no Dogs in Heaven, then when I die, I want to go where they went". Will Rogers
I work hard so my Dog can have a better life...
I work hard so my Dog can have a better life...
Re: GEC "PPP" Designation
GEC has always put the PPP on there first "run" of a "new pattern" regardless of handle material or production total* -- normally they run the TIDIOUTE labels first --when a ""New Pattern"" is introduced, "all" the Tidioute in the first run will have the PPP bling** __ the Northfield & Great Eastern ( if they run a batch ) ,nor the second run of Tidioute will have the PPP** -- **ONLY** the ""first run / batch"" of knives, will have the PPP bling** -- at one time,this was a ,plus++, for collectors _ as was getting the knife with 002 serial number ( 001 was always kept in the factory collection* ) not so much anymore due to production changes / totals** -- still the best American made pocket knife IMHO**XX Case XX wrote:I know what it means, but the question I was asking was, does that etching fall into the same category as the others stated in the post about the prototype etching on that Case knife?jerryd6818 wrote:It means "Pattern Production Premiere".
__________
Mike
PS -- I have seen GEC knives have several ""Prototype"" knives for the same pattern ( more than once ) and the Prototype knives ""selling price" was more from the dealers** --- in the early years, some were even stamped ""Factory Test Production"" when they would try a unique handle material** -- was a lot of fun collecting & trying to keep abreast of all the happenings !!!
I'm not young enough,____to know everything !!!!!!!!!!!!
MONK****
MONK****
- TwoFlowersLuggage
- Posts: 3113
- Joined: Sun Nov 26, 2017 8:18 pm
- Location: Stuck in traffic on a highway in Southern California
Re: GEC "PPP" Designation
Ken - From what I have seen, I suspect you are too rational and have FAR too much integrity to be successful in Marketing...Mumbleypeg wrote:At one time in my career I was in marketing. I thought marketing and sales steered the ship. Then I moved to Operations, and there was where I learned marketing's steering wheel isn't connected to the ship's rudder!TwoFlowersLuggage wrote:I assume that is a fancy way to say "First Run"? Sales & Marketing dweebs ruin everything. The universe would be a better place if Sales & Marketing departments did not exist. Of course, I also say the same thing about Accounting, Finance, Legal, HR, Compliance, Regulatory, or any other department not involved in either designing the product, making the product or directly helping those people design & make the product...
Ken
"The Luggage had a straightforward way of dealing with things between it and its intended destination: it ignored them." -Terry Pratchett
- Mumbleypeg
- Gold Tier
- Posts: 13468
- Joined: Fri Apr 18, 2014 1:28 am
- Location: Republic of Texas
Re: GEC "PPP" Designation
Thank you, you're too kind. I was fortunate to work for a company that placed high value on a culture of ethics, corporate citizenship, product quality and reliability, and honest treatment of everyone - customers, suppliers, and employees. That wasn't just what they said, it's what they did. Flim-flam artists didn't last long there, in marketing or anywhere else.
Ken
Ken
Member AKTI, TSRA, NRA.
If your religion requires that you hate someone, you need a new religion.
When the people fear their government, that is tyranny. When government fears the people, that is freedom.
https://www.akti.org/
If your religion requires that you hate someone, you need a new religion.
When the people fear their government, that is tyranny. When government fears the people, that is freedom.
https://www.akti.org/
Re: GEC "PPP" Designation
What I really dislike is the fact that many or most of these inane marketing ploy markings are just etched on. It is easy for fakers to copy some etches and since the original manufacturer has the stencils on hand they can print more out any time they desire. Of course Stamping the marks in would require more work, but it would be harder to copy. I would not pay extra for any knife with these "prototype", first run", or "PPP knives. As in all collectible areas things that were made to collect really don't ever increase greatly in value since all produced are often tucked away for posterity and are always found in new condition. Buy a "collectible Christmas plate" and in fifty years you may be able to find a buyer who will give you a very small amount of interest on your investment.
Re: GEC "PPP" Designation
Yes, and you can verify them by production totals given on the site. Hard to fool anyone that takes time to research a GEC.big monk wrote:XX Case XX wrote: GEC has always put the PPP on there first "run" of a "new pattern" regardless of handle material or production total* -- normally they run the TIDIOUTE labels first --when a ""New Pattern"" is introduced, "all" the Tidioute in the first run will have the PPP bling** __ the Northfield & Great Eastern ( if they run a batch ) ,nor the second run of Tidioute will have the PPP** -- **ONLY** the ""first run / batch"" of knives, will have the PPP bling** -- at one time,this was a ,plus++, for collectors _ as was getting the knife with 002 serial number ( 001 was always kept in the factory collection* ) not so much anymore due to production changes / totals** -- still the best American made pocket knife IMHO**
PS -- I have seen GEC knives have several ""Prototype"" knives for the same pattern ( more than once ) and the Prototype knives ""selling price" was more from the dealers** --- in the early years, some were even stamped ""Factory Test Production"" when they would try a unique handle material** -- was a lot of fun collecting & trying to keep abreast of all the happenings !!!
I buy roosters combs and farmers..........................................................jack knives [/b]
GEC SFOs and others at LICK CREEK CUTLERY- www.allaboutpocketknives.com/wlf
May the Father and Son bless
Lyle
GEC SFOs and others at LICK CREEK CUTLERY- www.allaboutpocketknives.com/wlf
May the Father and Son bless
Lyle
- RalphAlsip
- Posts: 2325
- Joined: Sun Feb 02, 2014 9:01 pm
- Location: Southern Illinois
Re: GEC "PPP" Designation
I wasn't paying enough attention when these patterns were released to know if they came before Tidioute or GEC sub brands. One of these knives with the PPP designation is a SFO knife for Blade Forums (harness jack 35). The other is a Northfield Texas Camp Knife 98 pattern.
I'm not trying to dispute or refute any comments made earlier - just providing examples of where the PPP designation can end up being used.
Tangent alert: The 35 harness jack is my most carried knife. The spear blade & punch configuration is very well suited to light use daily knife needs.
I'm not trying to dispute or refute any comments made earlier - just providing examples of where the PPP designation can end up being used.
Tangent alert: The 35 harness jack is my most carried knife. The spear blade & punch configuration is very well suited to light use daily knife needs.