Camillus knife handle material
Camillus knife handle material
I found an old Camillus over the weekend and am curious about the handle material.It is a short line and model number 14.
The material is a brownish gold. It does not have depth like celluloid, nor does it smell like celluloid when you rub it. It is heavier than most knives I have had this size. I do not see any cracks, or chips. At first I thought it was some type of stone but I really do not know.
I am attaching pictures and appreciate any help.
The material is a brownish gold. It does not have depth like celluloid, nor does it smell like celluloid when you rub it. It is heavier than most knives I have had this size. I do not see any cracks, or chips. At first I thought it was some type of stone but I really do not know.
I am attaching pictures and appreciate any help.
- americanedgetech
- Posts: 1552
- Joined: Mon Sep 04, 2017 1:40 am
- Location: Florida Pan Handle
- Contact:
Re: Camillus knife handle material
It looks like Maple "burl" to me.
The knotty areas you find in bowls growing on trees.
The knotty areas you find in bowls growing on trees.
Ken Mc.
WTB Kershaw 2120 MACHO Lockback Parts knife
I need a pile side scale. THX!
WTB Kershaw 2120 MACHO Lockback Parts knife
I need a pile side scale. THX!
- Tsar Bomba
- Posts: 3622
- Joined: Fri Jan 30, 2015 5:14 am
- Contact:
Re: Camillus knife handle material
I agree, that looks like a rehandled Camillus in some sort of wood burl. Oddly, the short lines always had pinned scales, so I think the rehandler went ahead and glued the wood slabs on like some of the newer Camilluses featured.
Tony
Everything's better with a Barlow
Everything's better with a Barlow
Re: Camillus knife handle material
I agree, this knife has had the handle replaced after it left the factory.
It does appear to be some type of burl wood.
It does appear to be some type of burl wood.
Dale
AAPK Administrator
Please visit my AAPK store: www.allaboutpocketknives.com/orvet
Job 13:15
"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
AAPK Administrator
Please visit my AAPK store: www.allaboutpocketknives.com/orvet
Job 13:15
"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
- jerryd6818
- Gold Tier
- Posts: 39165
- Joined: Sun Jan 04, 2009 5:23 am
- Location: The middle of the top of a bastion of Liberalism.
Re: Camillus knife handle material
Bingo, bingo, bingo. And now you know.
Forged on the anvil of discipline.
The Few. The Proud.
Jerry D.
This country has become more about sub-groups than about it's unity as a nation.
"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
The Few. The Proud.
Jerry D.
This country has become more about sub-groups than about it's unity as a nation.
"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
Re: Camillus knife handle material
For what it's worth, I think it's a very nice looking knife.
Phil
AAPK Administrator
Jesus died for you. Are you living for Him?
"Buy More Ammo!"
Johnnie Fain 1949-2009
AAPK Administrator
Jesus died for you. Are you living for Him?
"Buy More Ammo!"
Johnnie Fain 1949-2009
- americanedgetech
- Posts: 1552
- Joined: Mon Sep 04, 2017 1:40 am
- Location: Florida Pan Handle
- Contact:
Re: Camillus knife handle material
Agreed!philco wrote:For what it's worth, I think it's a very nice looking knife.
I've been replacing handles on beaters, and found a cool method for keeping the handle pins by cutting them shorter, and using them as dowels to keep the scale alignment secure. I think it's a cool method, and may have been used in this knife.
It's a looker for sure.
Ken Mc.
WTB Kershaw 2120 MACHO Lockback Parts knife
I need a pile side scale. THX!
WTB Kershaw 2120 MACHO Lockback Parts knife
I need a pile side scale. THX!
- Tsar Bomba
- Posts: 3622
- Joined: Fri Jan 30, 2015 5:14 am
- Contact:
Re: Camillus knife handle material
I have a rehandled Imperial (IIRC) scout in a wood burl shadow pattern, it is an interesting look for that knife. Checked the case where I normally keep my scouts but it's nowhere to be found... I'll have to hunt it down and take some photos,philco wrote:For what it's worth, I think it's a very nice looking knife.
Re: Camillus knife handle material
We'll await your report.
Phil
AAPK Administrator
Jesus died for you. Are you living for Him?
"Buy More Ammo!"
Johnnie Fain 1949-2009
AAPK Administrator
Jesus died for you. Are you living for Him?
"Buy More Ammo!"
Johnnie Fain 1949-2009
Re: Camillus knife handle material
Birchbark - I got some from Culpepper earlier this year, looks a lot like your knfe handles.
http://www.knifehandles.com/media/catal ... chbark.jpg
http://www.knifehandles.com/media/catal ... chbark.jpg
A wise man can learn more from a foolish question than a fool can learn from a wise answer.
Bruce Lee
Bruce Lee
- americanedgetech
- Posts: 1552
- Joined: Mon Sep 04, 2017 1:40 am
- Location: Florida Pan Handle
- Contact:
Re: Camillus knife handle material
The color is similar but yours is a straight grain.Toejammer wrote:Birchbark - I got some from Culpepper earlier this year, looks a lot like your knfe handles.
http://www.knifehandles.com/media/catal ... chbark.jpg
I'm pretty sure the OP knife is Maple due to the lighter wood showing thru the finish. Burl wood (knot wood) is very dense, and does not take penetrating stain(s) well. It does take surface finishes beautifully tho.
Ken Mc.
WTB Kershaw 2120 MACHO Lockback Parts knife
I need a pile side scale. THX!
WTB Kershaw 2120 MACHO Lockback Parts knife
I need a pile side scale. THX!
Re: Camillus knife handle material
Thanks all. Its a keeper for me. I just like the look and feel.
Re: Camillus knife handle material
Not to be argumentative Ken, but it really depends on the type of tree the burl came from; for example maple and cedar burl usually absorb stains and dyes very well, until they are stabilized.americanedgetech wrote: I'm pretty sure the OP knife is Maple due to the lighter wood showing thru the finish. Burl wood (knot wood) is very dense, and does not take penetrating stain(s) well. It does take surface finishes beautifully tho.
Most of the burl wood you buy that is sold specifically for knife handles has been stabilized. Stabilizing helps keep it from cracking and splitting and it also makes it much denser (in the case of maple). The stabilizing process usually makes finishing the wood much easier because it fills minute pores and often all you need to do is buff the stabilized wood with a fine compound to achieve a beautiful finish.
One burl wood seller says that maple burl generally doubles in weight when it is stabilized because of the amount of polymer it absorbs. Other woods like desert ironwood and cocobolo absorb very little of the stabilizing medium due to the density of the wood.
The stabilizing process increases the weight of the wood and also seals the pores of the wood so that stain and dyes do not penetrate it well. However, the stabilizing material can be colored and the wood can be dyed prior to stabilization. I have seen some truly spectacular burls with multicolored dye jobs.
Dale
AAPK Administrator
Please visit my AAPK store: www.allaboutpocketknives.com/orvet
Job 13:15
"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
AAPK Administrator
Please visit my AAPK store: www.allaboutpocketknives.com/orvet
Job 13:15
"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
- americanedgetech
- Posts: 1552
- Joined: Mon Sep 04, 2017 1:40 am
- Location: Florida Pan Handle
- Contact:
Re: Camillus knife handle material
I should have said it is very dense "once stabilized".orvet wrote:Not to be argumentative Ken, but it really depends on the type of tree the burl came from; for example maple and cedar burl usually absorb stains and dyes very well, until they are stabilized.americanedgetech wrote: I'm pretty sure the OP knife is Maple due to the lighter wood showing thru the finish. Burl wood (knot wood) is very dense, and does not take penetrating stain(s) well. It does take surface finishes beautifully tho.
Most of the burl wood you buy that is sold specifically for knife handles has been stabilized. Stabilizing helps keep it from cracking and splitting and it also makes it much denser (in the case of maple). The stabilizing process usually makes finishing the wood much easier because it fills minute pores and often all you need to do is buff the stabilized wood with a fine compound to achieve a beautiful finish.
One burl wood seller says that maple burl generally doubles in weight when it is stabilized because of the amount of polymer it absorbs. Other woods like desert ironwood and cocobolo absorb very little of the stabilizing medium due to the density of the wood.
The stabilizing process increases the weight of the wood and also seals the pores of the wood so that stain and dyes do not penetrate it well. However, the stabilizing material can be colored and the wood can be dyed prior to stabilization. I have seen some truly spectacular burls with multicolored dye jobs.
As you point out, not many people will use raw materials, and the majority of finishes are indeed surface finishes.
I tend to think more than type so my thoughts are often incomplete in this format.
You are a champ sir for adding the extra information.
Ps... I still think it's Maple.
Ken Mc.
WTB Kershaw 2120 MACHO Lockback Parts knife
I need a pile side scale. THX!
WTB Kershaw 2120 MACHO Lockback Parts knife
I need a pile side scale. THX!
Re: Camillus knife handle material
I made the point to help other people avoid the mistake I made when I first started doing knife handles. I went out and bought some really beautiful maple burl and got home and discovered it was way too soft for knife handles without being stabilized. So I have some beautiful Maple burl then I can't use for knife handles unless I send it out somewhere to be stabilized. I did make a couple of clocks with it. The burl I have is very light in color.
Dale
AAPK Administrator
Please visit my AAPK store: www.allaboutpocketknives.com/orvet
Job 13:15
"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
AAPK Administrator
Please visit my AAPK store: www.allaboutpocketknives.com/orvet
Job 13:15
"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan