Old timers
- Owd Wullie
- Posts: 3627
- Joined: Sun Mar 01, 2009 4:31 am
- Location: Macomb, MO
Old timers
Finally got around to getting these ready to run.
Joseph Wostenholm, not to be confused with his highness George of I*XL fame. The two had a feud over name rights for years and ol George finally won out,
This one was more than likely a military razor. Dog only knows what outfit. It's about a 5/8. Interesting to hone too. Even more interesting to shave with that big "smile" the blade has. Surprisingly, it is a wonderful shaver. The 80 West St address dates it 1841-1845.
Dyed horn scales. Whoever dyed 'em was an artist.
This one is a 7/8 W&B "Chinese" razor. The characters on the blade are not real Chinese characters but they look neat. Supposedly these were popular around the time of the Gold Rush era. I think it's a bit later than that and more like 1860's to 1880's.
It's a healthy hand full of English steel either way. Been up and down a hone a few million times too from the amount of wear and the width of the bevel. Against my better judgement I honed it without putting a layer of tape or two on the spine. It shaves OK, but not as good as I'd hoped. I'll tape it up and recut the bevel on it and it should come around then.
Joseph Wostenholm, not to be confused with his highness George of I*XL fame. The two had a feud over name rights for years and ol George finally won out,
This one was more than likely a military razor. Dog only knows what outfit. It's about a 5/8. Interesting to hone too. Even more interesting to shave with that big "smile" the blade has. Surprisingly, it is a wonderful shaver. The 80 West St address dates it 1841-1845.
Dyed horn scales. Whoever dyed 'em was an artist.
This one is a 7/8 W&B "Chinese" razor. The characters on the blade are not real Chinese characters but they look neat. Supposedly these were popular around the time of the Gold Rush era. I think it's a bit later than that and more like 1860's to 1880's.
It's a healthy hand full of English steel either way. Been up and down a hone a few million times too from the amount of wear and the width of the bevel. Against my better judgement I honed it without putting a layer of tape or two on the spine. It shaves OK, but not as good as I'd hoped. I'll tape it up and recut the bevel on it and it should come around then.
Member of The West Texas Chapter Of Gun Ownin', Pickup Truck Drivin', Jingoistic, Right Wing, History Changin', Huge Carbon Footprint Leavin' Conspirators.
- Gunstock Jack
- Posts: 1626
- Joined: Wed Feb 27, 2008 7:59 pm
- Location: The "other" Washington
Re: Old timers
Very cool Willie! I can imagine trying to hone that smiley!
Barry
Great Eastern Cutlery distributor: http://www.gunstockjacksknives.com
Contact me: info@gunstockjacksknives.com
Great Eastern Cutlery distributor: http://www.gunstockjacksknives.com
Contact me: info@gunstockjacksknives.com
- Owd Wullie
- Posts: 3627
- Joined: Sun Mar 01, 2009 4:31 am
- Location: Macomb, MO
Re: Old timers
It isn't that bad. You start at the heel and drag it toward you as you rotate the point around towards you. The fun part is rocking the blade as you pull/push it across the stone as the edge doesn't lay completely flat all the way across. It is way different than a newish hollow ground with a straight edge.
Here's another smiling razor, I just got honed up. It's a little 5/8 W&B with bone scales.
Took it for a shave last night. Shaves great, BUT, it's TINY compared to what I'm used to. That old Wostenholm is about the same width, but has considerably more weight.
Smiling razors are nice to shave with too.
Ought to find ya one and give it a whirl.
Here's another smiling razor, I just got honed up. It's a little 5/8 W&B with bone scales.
Took it for a shave last night. Shaves great, BUT, it's TINY compared to what I'm used to. That old Wostenholm is about the same width, but has considerably more weight.
Smiling razors are nice to shave with too.
Ought to find ya one and give it a whirl.
Member of The West Texas Chapter Of Gun Ownin', Pickup Truck Drivin', Jingoistic, Right Wing, History Changin', Huge Carbon Footprint Leavin' Conspirators.
Re: Old timers
willie i wonder how all those horn handles excasped more massive bettle wear? HiPower
HiPower
- Owd Wullie
- Posts: 3627
- Joined: Sun Mar 01, 2009 4:31 am
- Location: Macomb, MO
Re: Old timers
Hard to know for sure. Maybe climate or whatever the razors were stored in.
Sure glad the beetles didn't get 'em like they have some others that I've got and more that I've seen. Those little bastards can tear up some stuff.
Sure glad the beetles didn't get 'em like they have some others that I've got and more that I've seen. Those little bastards can tear up some stuff.
Member of The West Texas Chapter Of Gun Ownin', Pickup Truck Drivin', Jingoistic, Right Wing, History Changin', Huge Carbon Footprint Leavin' Conspirators.
-
- Posts: 582
- Joined: Tue Nov 25, 2008 10:56 pm
- Location: Southern Missouri
- Contact:
Re: Old timers
Those look good wullie!
Thought about you the other day when I was in Midway Arkansas at a antique store....they had several razors in their display case. They usually have some every time I'm in there....
Thought about you the other day when I was in Midway Arkansas at a antique store....they had several razors in their display case. They usually have some every time I'm in there....
God Bless!
Craig Blankenship
Booger County Outfitters LLC.
Maker of Custom Knives and Custom Screenprinted Garments
Craig Blankenship
Booger County Outfitters LLC.
Maker of Custom Knives and Custom Screenprinted Garments
- Owd Wullie
- Posts: 3627
- Joined: Sun Mar 01, 2009 4:31 am
- Location: Macomb, MO
Re: Old timers
Hey Kieth,
We'll be up there the first week of June. I'll come over and visit for a bit.
We'll be up there the first week of June. I'll come over and visit for a bit.
Member of The West Texas Chapter Of Gun Ownin', Pickup Truck Drivin', Jingoistic, Right Wing, History Changin', Huge Carbon Footprint Leavin' Conspirators.
- Gunstock Jack
- Posts: 1626
- Joined: Wed Feb 27, 2008 7:59 pm
- Location: The "other" Washington
Re: Old timers
Here's an ol' timer I got in a feebay deal. It came with a vintage strop I bought and the photos were better of the strop. Fair price for a horsehide strop so the razor is sorta a "gimmie". Whatcha think Willie?
The strop is my old one, the new one is better.
Weighs in at an even three ounces and is a little over an inch wide. Former owner listed it as having wood scales, but they are horn, of course, complete with bug bites. Lead spacer and brass rivets complete the package. I'm gonna go soak it in mineral oil and then sharpen him up an' give 'im a spin around my chin!The strop is my old one, the new one is better.
Barry
Great Eastern Cutlery distributor: http://www.gunstockjacksknives.com
Contact me: info@gunstockjacksknives.com
Great Eastern Cutlery distributor: http://www.gunstockjacksknives.com
Contact me: info@gunstockjacksknives.com
- Miller Bro's
- Gold Tier
- Posts: 11646
- Joined: Mon Feb 16, 2009 11:22 pm
- Location: Earth
- Gunstock Jack
- Posts: 1626
- Joined: Wed Feb 27, 2008 7:59 pm
- Location: The "other" Washington
Re: Old timers
Thanks Dimitri! Yeah, I've seen 'em go for some big money... that's why I never owned one.
Barry
Great Eastern Cutlery distributor: http://www.gunstockjacksknives.com
Contact me: info@gunstockjacksknives.com
Great Eastern Cutlery distributor: http://www.gunstockjacksknives.com
Contact me: info@gunstockjacksknives.com
- Owd Wullie
- Posts: 3627
- Joined: Sun Mar 01, 2009 4:31 am
- Location: Macomb, MO
Re: Old timers
NICE catch Barry!!
Horsehide strops are the berries!!
Once you get that beast honed up, you'll LOVE shaving with that thing. IF you don't, send it my way and I'll send you 6 ounces of newer smaller razors.
Like this maybe?
Horsehide strops are the berries!!
Once you get that beast honed up, you'll LOVE shaving with that thing. IF you don't, send it my way and I'll send you 6 ounces of newer smaller razors.
Like this maybe?
Member of The West Texas Chapter Of Gun Ownin', Pickup Truck Drivin', Jingoistic, Right Wing, History Changin', Huge Carbon Footprint Leavin' Conspirators.
- Owd Wullie
- Posts: 3627
- Joined: Sun Mar 01, 2009 4:31 am
- Location: Macomb, MO
Re: Old timers
Here's one that is only an inch. Pretty sure it's made by W&B but was imported by KING.
Didn't get a lot of use. Honed up easy and shaves wonderfully.
Was just noticing on yours that the hone wear is pretty noticeable. A layer of electricians tape along the spine will make it easier to hone up. You don't ahve to cut quite so much metal on the bevel that way. I've had some that had so much wear that I put four layers of tape on 'em to get the bevel down to a decent size instead of half an inch wide like that old W&B "Chinese" razor posted above that I didn't use any tape on.
Didn't get a lot of use. Honed up easy and shaves wonderfully.
Was just noticing on yours that the hone wear is pretty noticeable. A layer of electricians tape along the spine will make it easier to hone up. You don't ahve to cut quite so much metal on the bevel that way. I've had some that had so much wear that I put four layers of tape on 'em to get the bevel down to a decent size instead of half an inch wide like that old W&B "Chinese" razor posted above that I didn't use any tape on.
Member of The West Texas Chapter Of Gun Ownin', Pickup Truck Drivin', Jingoistic, Right Wing, History Changin', Huge Carbon Footprint Leavin' Conspirators.
- Gunstock Jack
- Posts: 1626
- Joined: Wed Feb 27, 2008 7:59 pm
- Location: The "other" Washington
Re: Old timers
Very cool gunstocks Willie! Definetly two thumbs up on that pair! The King is gorgeous!!! Super razor there too!
Well, I cleaned and honed the ol' girl up last nite and shaved with it this mornin'! It is a very nice razor once you get a feel for the heft of the thing. Had to put it down once to rest my arm, but it did a commendable job. I 'spose the weight isn't a bad thing... kinda warms up the elbow for afternoon activities. All kidding aside, the bevel wasn't too long at all so no tape requied for the hone work; it actually took less than a hour. Looks like the blade slipped out of someone's grip and slammed into the horn scales taking a chip out of one side, but otherwise the scales are in good shape as are the original rivets. I'm curious of the date of manufacture; would it be pre 1880?
Here it is after clean-up: Compared to a more normal sized razor:
Well, I cleaned and honed the ol' girl up last nite and shaved with it this mornin'! It is a very nice razor once you get a feel for the heft of the thing. Had to put it down once to rest my arm, but it did a commendable job. I 'spose the weight isn't a bad thing... kinda warms up the elbow for afternoon activities. All kidding aside, the bevel wasn't too long at all so no tape requied for the hone work; it actually took less than a hour. Looks like the blade slipped out of someone's grip and slammed into the horn scales taking a chip out of one side, but otherwise the scales are in good shape as are the original rivets. I'm curious of the date of manufacture; would it be pre 1880?
Here it is after clean-up: Compared to a more normal sized razor:
Barry
Great Eastern Cutlery distributor: http://www.gunstockjacksknives.com
Contact me: info@gunstockjacksknives.com
Great Eastern Cutlery distributor: http://www.gunstockjacksknives.com
Contact me: info@gunstockjacksknives.com
- Owd Wullie
- Posts: 3627
- Joined: Sun Mar 01, 2009 4:31 am
- Location: Macomb, MO
Re: Old timers
Good deal on the hone and the shave. They are a hefty handful but I LOVE the heavy bastards myself. That edge will probably mellow and get really smooth after 4 or 5 stroppings. Hit it about 10 or 15 licks on the linen and then 20 or so on the horse hide. After the edge settles down, I usually run mine about 5 (up and back) on linen and then 15 or 20 on the horse hide. Hold that strop pretty taught when you use it. Another thing they recommend is to oil the strop with the oil off your hand. I usually rub my forehead and then rub that into the strop. Slicks it right up. Horse hide strops don't have as "draw" (drag on the blade) as cow hide. That Illinois is a good one.
Scale damage like that is typical of those big ones. It does appear to to have never been rescaled as it is wearing the typical W&B pins and collars. Those scales will shine again if you hit 'em with some 1200 sand paper and then polish them, or hit 'em gently on a buffing wheel. They'll get smooth as glass. Mineral oil will help too.
As for age? General consensus is 1850's-1880's.
The "For Barber's Use" didn't mean they were sold only to barbers. It was a "grade" of razor that was supposed to be a step above the regular line. A bit more snob appeal or something I guess. Either that or they were trying to signify the razor was up to doing commercial weight work. You'll see some every now and then that are marked FOR BARBERS ONLY too.
You got a good one.
Scale damage like that is typical of those big ones. It does appear to to have never been rescaled as it is wearing the typical W&B pins and collars. Those scales will shine again if you hit 'em with some 1200 sand paper and then polish them, or hit 'em gently on a buffing wheel. They'll get smooth as glass. Mineral oil will help too.
As for age? General consensus is 1850's-1880's.
The "For Barber's Use" didn't mean they were sold only to barbers. It was a "grade" of razor that was supposed to be a step above the regular line. A bit more snob appeal or something I guess. Either that or they were trying to signify the razor was up to doing commercial weight work. You'll see some every now and then that are marked FOR BARBERS ONLY too.
You got a good one.
Member of The West Texas Chapter Of Gun Ownin', Pickup Truck Drivin', Jingoistic, Right Wing, History Changin', Huge Carbon Footprint Leavin' Conspirators.
- Gunstock Jack
- Posts: 1626
- Joined: Wed Feb 27, 2008 7:59 pm
- Location: The "other" Washington
Re: Old timers
Good info Willie.
The Illinois strop is one I bought years ago and I ruined it for razors by rubbing green compound into it; now it puts scratches the 12,000 grit bevel. Still good for knives which is why it has the green compound embedded in it anyway.
The new strop is an 'Ace High' Belgian Shell that I got with the razor in question. I've been working it over as it was pretty dried out, but hopefully not dry rotted like the stiching. When I pulled the handle taught, it came off in my hand. Hand stiched it back on with some heavy thread but still working on the strop. It's a beauty though and I think will come through OK. I'll post some photos of it later.
The Illinois strop is one I bought years ago and I ruined it for razors by rubbing green compound into it; now it puts scratches the 12,000 grit bevel. Still good for knives which is why it has the green compound embedded in it anyway.
The new strop is an 'Ace High' Belgian Shell that I got with the razor in question. I've been working it over as it was pretty dried out, but hopefully not dry rotted like the stiching. When I pulled the handle taught, it came off in my hand. Hand stiched it back on with some heavy thread but still working on the strop. It's a beauty though and I think will come through OK. I'll post some photos of it later.
Barry
Great Eastern Cutlery distributor: http://www.gunstockjacksknives.com
Contact me: info@gunstockjacksknives.com
Great Eastern Cutlery distributor: http://www.gunstockjacksknives.com
Contact me: info@gunstockjacksknives.com
- Owd Wullie
- Posts: 3627
- Joined: Sun Mar 01, 2009 4:31 am
- Location: Macomb, MO
Re: Old timers
Might try sanding that Illinois with some 1500-2000 paper and seeing if it'll clean off the crud.
Here's my old "shell" (horse hide) strop.
Even has fake Cyrillic writing on it. LOL
HELL of a strop though. Got it off ebay for 20 bucks. Seems everybody but me slept through that auction.
Here's my old "shell" (horse hide) strop.
Even has fake Cyrillic writing on it. LOL
HELL of a strop though. Got it off ebay for 20 bucks. Seems everybody but me slept through that auction.
Member of The West Texas Chapter Of Gun Ownin', Pickup Truck Drivin', Jingoistic, Right Wing, History Changin', Huge Carbon Footprint Leavin' Conspirators.
- Gunstock Jack
- Posts: 1626
- Joined: Wed Feb 27, 2008 7:59 pm
- Location: The "other" Washington
Re: Old timers
Wow, that's a beauty! Great score on that one. Here's the strop I got w/ the W&B chopper:
It's a little dry and needs some love, but I think it'll be alright. Note the new stitching on the handle. It is about a 1/2" wider than the Illinois and 3 or 4 inches longer.Barry
Great Eastern Cutlery distributor: http://www.gunstockjacksknives.com
Contact me: info@gunstockjacksknives.com
Great Eastern Cutlery distributor: http://www.gunstockjacksknives.com
Contact me: info@gunstockjacksknives.com
- Owd Wullie
- Posts: 3627
- Joined: Sun Mar 01, 2009 4:31 am
- Location: Macomb, MO
Re: Old timers
That's a good looking old strop. Ought to come around just fine.
With the pic of what looks like the Wright Flyer in that stamp, She's probably from the early teens.
NICE job of resewing it too. Pay attention to the leather that wraps around the swivel. I've seen a LOT of old strops that have that piece ripped out where the leather got dry and just tore out.
That old strop of mine is about 3" wide. It's a long sucker too. Got another strop with handles like yours and the old one is even longer than where the handles end. You can get a long stroke on that puppy. Feels funny using the other strop as it's shorter.
You'll like that horse hide once you get it tuned up. It's slick feeling compared to latigo. I can't tell any real difference in the edge though.
With the pic of what looks like the Wright Flyer in that stamp, She's probably from the early teens.
NICE job of resewing it too. Pay attention to the leather that wraps around the swivel. I've seen a LOT of old strops that have that piece ripped out where the leather got dry and just tore out.
That old strop of mine is about 3" wide. It's a long sucker too. Got another strop with handles like yours and the old one is even longer than where the handles end. You can get a long stroke on that puppy. Feels funny using the other strop as it's shorter.
You'll like that horse hide once you get it tuned up. It's slick feeling compared to latigo. I can't tell any real difference in the edge though.
Member of The West Texas Chapter Of Gun Ownin', Pickup Truck Drivin', Jingoistic, Right Wing, History Changin', Huge Carbon Footprint Leavin' Conspirators.
-
- Posts: 10132
- Joined: Tue Nov 06, 2007 9:02 pm
- Location: Tecumseh,Michigan
Re: Old timers
Here is one I posted awhile back.Razor slips in the side and you pull on one end of the strop and then the other.
Adventure BEFORE Dementia!
- Owd Wullie
- Posts: 3627
- Joined: Sun Mar 01, 2009 4:31 am
- Location: Macomb, MO
Re: Old timers
I remember you posting that beauty.
Those are pretty neat and you don't see 'em in that good of condition very often.
Those are pretty neat and you don't see 'em in that good of condition very often.
Member of The West Texas Chapter Of Gun Ownin', Pickup Truck Drivin', Jingoistic, Right Wing, History Changin', Huge Carbon Footprint Leavin' Conspirators.
- Gunstock Jack
- Posts: 1626
- Joined: Wed Feb 27, 2008 7:59 pm
- Location: The "other" Washington
Re: Old timers
Interesting strop from the "Age of Invention"! Everybody was trying to build a better mouse trap in that era. Thanks for posting it Knife7knut.
Picked up these ol' timers recently; a W.Wright with some gorgeous horn handles on it (in spite of a hairline crack on the reverse scale), an old Wosty Washington Works in decent condition, and a rather well used/abused F. Reynolds. The old horn handles are getting hard to find in good condition due to bugs and age. Now it's off to the buffer for a light cleaning and then a mineral oil soak. I'll make the decision whether to disassemble any for further work afterwards. I'll likely be shavin' with one or more soon!
Picked up these ol' timers recently; a W.Wright with some gorgeous horn handles on it (in spite of a hairline crack on the reverse scale), an old Wosty Washington Works in decent condition, and a rather well used/abused F. Reynolds. The old horn handles are getting hard to find in good condition due to bugs and age. Now it's off to the buffer for a light cleaning and then a mineral oil soak. I'll make the decision whether to disassemble any for further work afterwards. I'll likely be shavin' with one or more soon!
Barry
Great Eastern Cutlery distributor: http://www.gunstockjacksknives.com
Contact me: info@gunstockjacksknives.com
Great Eastern Cutlery distributor: http://www.gunstockjacksknives.com
Contact me: info@gunstockjacksknives.com
- Miller Bro's
- Gold Tier
- Posts: 11646
- Joined: Mon Feb 16, 2009 11:22 pm
- Location: Earth
Re: Old timers
Very nice selection of old razors
Did you get the original box with any of them?
Did you get the original box with any of them?
AAPK Janitor
369
369
- Gunstock Jack
- Posts: 1626
- Joined: Wed Feb 27, 2008 7:59 pm
- Location: The "other" Washington
Re: Old timers
Ha! I have never gotten the right box with an older razor. Seems like the boxes are much rarer than the razors. But... I have a couple of old pasteboard 'coffin' boxes and may even have a match.
Check it out: Non-XLL Joseph Allen & Sons The blade is warped on this near wedge and I nearly gave up on sharpening it, but it came through OK.
Close to a match but the Wosty is not the correct "pipe razor" Also, the end of the box is blown out like so many are.
And here's a dandy but no razor. I'm not sure if "Washington Razor" is the same as "Washington Works" by Wostenholm or what. Can you shed some light? Still has the original gold leaf print remaining and is in wonderful condition for its age.
Check it out: Non-XLL Joseph Allen & Sons The blade is warped on this near wedge and I nearly gave up on sharpening it, but it came through OK.
Close to a match but the Wosty is not the correct "pipe razor" Also, the end of the box is blown out like so many are.
And here's a dandy but no razor. I'm not sure if "Washington Razor" is the same as "Washington Works" by Wostenholm or what. Can you shed some light? Still has the original gold leaf print remaining and is in wonderful condition for its age.
Barry
Great Eastern Cutlery distributor: http://www.gunstockjacksknives.com
Contact me: info@gunstockjacksknives.com
Great Eastern Cutlery distributor: http://www.gunstockjacksknives.com
Contact me: info@gunstockjacksknives.com
- Owd Wullie
- Posts: 3627
- Joined: Sun Mar 01, 2009 4:31 am
- Location: Macomb, MO
Re: Old timers
I think Washington Razors were razors that had old G W's likeness etched on the blade.
I've got one or two of those old Wosty "Pipe" razors in my pile of "razors that are probably too far gone" pile.
I've got one headed my way but I have no idea what kind of shape it's in.
You've got some neat new razors.
I've got one or two of those old Wosty "Pipe" razors in my pile of "razors that are probably too far gone" pile.
I've got one headed my way but I have no idea what kind of shape it's in.
You've got some neat new razors.
Member of The West Texas Chapter Of Gun Ownin', Pickup Truck Drivin', Jingoistic, Right Wing, History Changin', Huge Carbon Footprint Leavin' Conspirators.
-
- Posts: 25
- Joined: Mon Dec 10, 2018 10:43 pm
Re: Old timers
The big one , at 3 ounces , also known as a " Chopper " with the curved notch at the end of the blade , known as a " Barbers Notch "
is Pre 1891 if it does NOT have the word Germany on the tang . I collect straights , some 100 plus or so . I have several W & Bs ,
all are " Pre " 1891 . if its to heavy for you we can always add it to my collection and i will handle the weight issue for you, nudge , nudge , wink , wink.
jus sayin
Brian
is Pre 1891 if it does NOT have the word Germany on the tang . I collect straights , some 100 plus or so . I have several W & Bs ,
all are " Pre " 1891 . if its to heavy for you we can always add it to my collection and i will handle the weight issue for you, nudge , nudge , wink , wink.
jus sayin
Brian