Marbles Green Stag Copperhead

A place to discuss & share pictures of knives made in China.
Post Reply
User avatar
Beavertail
Posts: 1195
Joined: Sun Feb 24, 2008 9:47 pm
Location: Way down south in Dixie

Marbles Green Stag Copperhead

Post by Beavertail »

Just got this in the mail today.
The clip blade reminds me of a muskrat blade. Fit and finish is perfect.
Attachments
mr609.jpg
Tim
User avatar
Sharpnshinyknives
Gold Tier
Gold Tier
Posts: 5106
Joined: Mon Jul 16, 2018 2:32 am
Location: Indiana
Contact:

Re: Marbles Green Stag Copperhead

Post by Sharpnshinyknives »

I’ve had some of those Chinese made Marbles and they have all been top notch on quality. I like that California clip blade on that. If you’re going to have two blades of equal length I think the blade design should be significantly different and that accomplishes that.
SSk Mark “Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same.” Ronald Reagan
jmh58
Posts: 13448
Joined: Wed Apr 02, 2008 11:22 pm
Location: Pgh,Pa

Re: Marbles Green Stag Copperhead

Post by jmh58 »

Beavertail wrote: Fri Apr 16, 2021 8:44 pm Just got this in the mail today.
The clip blade reminds me of a muskrat blade. Fit and finish is perfect.
👍😎👍
John 🤠
Not all who wander are lost!!

Of all the paths you take in life,
Make sure some of them are Dirt!!!
Louisville.Boy1947
Posts: 514
Joined: Wed Oct 09, 2019 12:36 am
Location: Louisville

Re: Marbles Green Stag Copperhead

Post by Louisville.Boy1947 »

::tu:: I am becoming a fan of Marbles brand.
User avatar
Beavertail
Posts: 1195
Joined: Sun Feb 24, 2008 9:47 pm
Location: Way down south in Dixie

Re: Marbles Green Stag Copperhead

Post by Beavertail »

They are well made for the price.
This one will be arriving next week.
Attachments
MR101.1.jpg
DSC01885.1.1.JPG
Tim
Gone2Three
Bronze Tier
Bronze Tier
Posts: 725
Joined: Thu Mar 19, 2020 5:32 am

Re: Marbles Green Stag Copperhead

Post by Gone2Three »

Beavertail wrote: Sat Apr 17, 2021 12:08 am They are well made for the price.
This one will be arriving next week.
That's a neat one Tim, where did you find it?
User avatar
Beavertail
Posts: 1195
Joined: Sun Feb 24, 2008 9:47 pm
Location: Way down south in Dixie

Re: Marbles Green Stag Copperhead

Post by Beavertail »

Gone2Three wrote: Sat Apr 17, 2021 2:00 am
Beavertail wrote: Sat Apr 17, 2021 12:08 am They are well made for the price.
This one will be arriving next week.
That's a neat one Tim, where did you find it?
I bought it from Amazon.
Tim
Gone2Three
Bronze Tier
Bronze Tier
Posts: 725
Joined: Thu Mar 19, 2020 5:32 am

Re: Marbles Green Stag Copperhead

Post by Gone2Three »

Beavertail wrote: Sat Apr 17, 2021 2:03 am
Gone2Three wrote: Sat Apr 17, 2021 2:00 am
Beavertail wrote: Sat Apr 17, 2021 12:08 am They are well made for the price.
This one will be arriving next week.
That's a neat one Tim, where did you find it?
I bought it from Amazon.
::tu::
User avatar
1967redrider
Gold Tier
Gold Tier
Posts: 16104
Joined: Wed Feb 02, 2011 4:23 pm
Location: Alexandria, VA
Contact:

Re: Marbles Green Stag Copperhead

Post by 1967redrider »

Beavertail wrote: Sat Apr 17, 2021 12:08 am They are well made for the price.
This one will be arriving next week.

I've got one of those folding Bowies, with reddish bone scales. Interesting design and I like the sheath too. ::tu::
Pocket, fixed, machete, axe, it's all good!

You're going to look awfully silly with that knife sticking out of your @#$. -Clint Eastwood, High Plains Drifter
User avatar
cudgee
Posts: 6185
Joined: Thu May 16, 2019 7:21 am
Location: Victoria. Australia.

Re: Marbles Green Stag Copperhead

Post by cudgee »

Sharpnshinyknives wrote: Fri Apr 16, 2021 8:49 pm I’ve had some of those Chinese made Marbles and they have all been top notch on quality. I like that California clip blade on that. If you’re going to have two blades of equal length I think the blade design should be significantly different and that accomplishes that.
IMAG0459.jpg
IMAG0458.jpg
Don't want to hijack the thread, but this is a Marbles Sowbelly Stockman i managed to pick-up. Value for money and fit and finish, you cannot go wrong. Hope you all have a good weekend. :)
User avatar
us2
Posts: 36
Joined: Wed Mar 17, 2021 11:55 pm
Location: Tennessee/W. North Carolina

Re: Marbles Green Stag Copperhead

Post by us2 »

What steel do they use ? How does it sharpen and hold edge? How so they compare with Rough Rider?
User avatar
Beavertail
Posts: 1195
Joined: Sun Feb 24, 2008 9:47 pm
Location: Way down south in Dixie

Re: Marbles Green Stag Copperhead

Post by Beavertail »

us2 wrote: Sat Apr 17, 2021 12:39 pm What steel do they use ? How does it sharpen and hold edge? How so they compare with Rough Rider?
The ones I have come out of the box shaving sharp and hold their edge very well.
I think these Marbles are made at the same factory as the Rough Ryders.
Tim
User avatar
us2
Posts: 36
Joined: Wed Mar 17, 2021 11:55 pm
Location: Tennessee/W. North Carolina

Re: Marbles Green Stag Copperhead

Post by us2 »

There was a time when I thought the only knife I could own was a USA made carbon steel knife. Old Timer or Case. That is still my favorite for lots of reasons but mainly because the way it sharpens. But those RR knives are hard to beat for the money. It's a good user knife to keep in my pocket and if I lose it or lay it down it's not too big a deal.

I am starting to accumulate a few shiny knives that just stay in the safe but most of my knives can go in my pocket if I feel like it.
Modern Slip Joints
Posts: 559
Joined: Sat Jul 14, 2018 4:15 am

Re: Marbles Green Stag Copperhead

Post by Modern Slip Joints »

The only green I've seen on real stag was from brass liners oxidizing and on different knives it was mold, but what the heck, I bought a Marbles green stag large Congress and usually carry it when I go to town. The odd color grew on me so I added a green stag Folding Hunter. I have no doubt that the current crop of SMKW Chinese Marbles slip joints are being stamped out and assembled with the same machines used to make Rough Ryders. The edge retention of their 440A has been decent. SMKW keeps adding more Rough Ryder carbon steel slip joints. If I was us2 I'd give his preferred carbon steel priority over which brand is stamped on the knife.

In 1972 I brought two of those "folding Bowie" knives back from France. Both were made in Germany. One is essentially the same swing guard knife and other has double hand guards integral to the bolsters. It has a cam lock between the hand guards on its back side. The cam blocks its slip joint back spring from rising. The swing guard was $25 U.S. and the cam lock was $40 U.S. The sporting goods store owner that sold them to me make it clear they were hunting/camping knives not weapons so I dislike them being called a "folding Bowie."
User avatar
Nev52
Posts: 1099
Joined: Thu Sep 14, 2017 12:37 am
Location: Pennsylvania

Re: Marbles Green Stag Copperhead

Post by Nev52 »

Beavertail,
After seeing your Marbles green stag copperhead I had to have one!! Just received it from SMKW. Fit and finish is perfect and I like the half stops. ::tu::
I am going to have to stop reading all the posts. It makes me buy more knives. ::dang::
marbles.jpg
marbles.jpg (28.85 KiB) Viewed 2216 times
cbay
Posts: 57
Joined: Sun Dec 20, 2020 11:31 pm
Location: S.W. Missouri
Contact:

Re: Marbles Green Stag Copperhead

Post by cbay »

Seen Marbles had the green and tortoise copperheads a while back and grabbed them. The green I carried for a good while and really like it. Both seem to be on par with the RRs.
Chris
Post Reply

Return to “Chinese-made knives”