Union Cut. Co. Olean NY

The KA-BAR brand originated as a trademark of the Tidioute Cutlery Company. Tidioute was later taken over & renamed the Union Cutlery Company which continued making the brand until Union eventually adopted it as the company name in 1952. Cutco Corporation later acquired the company in 1996.
User avatar
RalphAlsip
Posts: 2320
Joined: Sun Feb 02, 2014 9:01 pm
Location: Southern Illinois

Re: Union Cut. Co. Olean NY

Post by RalphAlsip »

peanut740 wrote:Jerry,I think the one on the right is the older.It has hammered pins,the other is spun.Just my 2 cents.
Roger, thank you for your insight. I always learn something new from you to consider when trying to read these old knives. ::handshake::

Here are detailed pictures of the the marks on both knives. The secondary blade marks on both knives are identical. The main blade mark on the knife with the hammered pins says "KA-BAR" and the mark on the other knife says "Union Cut. Co. Olean, NY". The marks combined with the raised letter shield are what informed my opinion that Union Cut. Co. marked Ka-Bar was older.

However, I was conflicted. The hammered pin Ka-Bar marked knife looks older and feels older. Your logic on the hammered pins makes a lot sense to me, especially combined with in-the-hand perception.

Does seeing these marks change your opinion?
Attachments
Ka-Bar / Union Mark Comparison
Ka-Bar / Union Mark Comparison
User avatar
peanut740
Gold Tier
Gold Tier
Posts: 7575
Joined: Fri Jan 23, 2009 2:32 pm
Location: Ohio, along the river
Contact:

Re: Union Cut. Co. Olean NY

Post by peanut740 »

Jerry,I was following the logic of reading the knife and not what it says.I have found few absolutes when it comes to old knives.Are the dates right on the marks? ::shrug:: Did they have an old cutler who didn`t like to spin pins? ::shrug:: From what I`ve read and observed by 1920 most places were spinning their pins.My guess is they`re close in age. ::handshake::
Roger
User avatar
RalphAlsip
Posts: 2320
Joined: Sun Feb 02, 2014 9:01 pm
Location: Southern Illinois

Re: Union Cut. Co. Olean NY

Post by RalphAlsip »

These pictures are of an old Union Cut. Co. Harness Jack. The main blade has the North America mark with "UNION" stamped inside. It also has a nice raised letter Union shield. My understanding is that I am at least the 3rd AAPK guardian of this fine knife.
Attachments
Union Cut. Co. Olean NY Harness Jack
Union Cut. Co. Olean NY Harness Jack
Union Cut. Co. Olean NY Harness Jack
Union Cut. Co. Olean NY Harness Jack
Union Cut. Co. Olean NY Harness Jack
Union Cut. Co. Olean NY Harness Jack
Union Cut. Co. Olean NY Harness Jack
Union Cut. Co. Olean NY Harness Jack
Union Cut. Co. Olean NY Harness Jack
Union Cut. Co. Olean NY Harness Jack
stockman
Gold Tier
Gold Tier
Posts: 3665
Joined: Mon Jul 24, 2006 3:19 pm

Re: Union Cut. Co. Olean NY

Post by stockman »

Nice pictures Jerry.

Harold
User avatar
btrwtr
Gold Tier
Gold Tier
Posts: 5061
Joined: Thu May 24, 2012 11:53 am

Re: Union Cut. Co. Olean NY

Post by btrwtr »

Here are a few to add to the thread.

First group:

Union stockman 3 5/8" closed, stamped all three blades. Flat sided punch.
Union arched stamp on both blades, trapper frame jack.
Union stamper both blades, toenail.

Second group:

Cherry tree chopper marked KA-BAR master and Union on hatchet.
Single blade Dog's head folding hunter with North American Union stamp.
Cherry tree chopper with Union stamps.
Attachments
IMG_6010.JPG
IMG_6014.JPG
IMG_6015.JPG
IMG_6016.JPG
If I have seen further it is by standing on the shoulders of giants.

Wayne

Please visit My AAPK store https://www.allaboutpocketknives.com/catalog/btrwtr
User avatar
espn77
Posts: 3545
Joined: Sat Mar 05, 2016 4:01 pm
Location: South west Kansas by way of Texas

Re: Union Cut. Co. Olean NY

Post by espn77 »

Jerry, Wayne. Sure is fun to look at your guys knives. ::tu::
User avatar
peanut740
Gold Tier
Gold Tier
Posts: 7575
Joined: Fri Jan 23, 2009 2:32 pm
Location: Ohio, along the river
Contact:

Re: Union Cut. Co. Olean NY

Post by peanut740 »

Jerry that harness jack will fit in your cigar box too.Wayne some are some dandys.The toenail and trapper frame are exceptional. ::tu:: ::tu::
Roger
BWT
Posts: 1868
Joined: Sat Jul 08, 2017 1:59 pm
Location: Central Florida

Re: Union Cut. Co. Olean NY

Post by BWT »

Thanks for sharing those good looking ole knives, never get tired of looking at the older knives.
Bill
User avatar
RalphAlsip
Posts: 2320
Joined: Sun Feb 02, 2014 9:01 pm
Location: Southern Illinois

Re: Union Cut. Co. Olean NY

Post by RalphAlsip »

These pictures show a Union Cut. Co. lever lock Doghead with arched stamp and Rogers bone handles. Thanks for looking.
Attachments
Union Cut. Co. Lever Lock Doghead
Union Cut. Co. Lever Lock Doghead
Union Cut. Co. Lever Lock Doghead
Union Cut. Co. Lever Lock Doghead
Union Cut. Co. Lever Lock Doghead
Union Cut. Co. Lever Lock Doghead
Union Cut. Co. Olean N.Y. U.S.A. Arched stamp
Union Cut. Co. Olean N.Y. U.S.A. Arched stamp
OldKnifeCollector
Posts: 61
Joined: Tue May 12, 2015 12:03 am
Location: Barre, Vermont
Contact:

Re: Union Cut. Co. Olean NY

Post by OldKnifeCollector »

That is one of the nicest looking knives I have ever seen. Beautiful knife!
stockman wrote:Slot Knife 6291 K&F Pat. Nov 5th 1907 dated on fork. Found pictures of these in Bone, Stag, and Pearl.

Harold
I collect pre-1950’s bone, stag, and wood handled high quality knives.
User avatar
peanut740
Gold Tier
Gold Tier
Posts: 7575
Joined: Fri Jan 23, 2009 2:32 pm
Location: Ohio, along the river
Contact:

Re: Union Cut. Co. Olean NY

Post by peanut740 »

Really good leverlock Jerry! ::tu::
Roger
stockman
Gold Tier
Gold Tier
Posts: 3665
Joined: Mon Jul 24, 2006 3:19 pm

Re: Union Cut. Co. Olean NY

Post by stockman »

Jerry that Dog Head Lock knife is really nice. I like any old Dog Head.

Harold
User avatar
btrwtr
Gold Tier
Gold Tier
Posts: 5061
Joined: Thu May 24, 2012 11:53 am

Re: Union Cut. Co. Olean NY

Post by btrwtr »

Count me in on the lever lock. Beautiful knife!
If I have seen further it is by standing on the shoulders of giants.

Wayne

Please visit My AAPK store https://www.allaboutpocketknives.com/catalog/btrwtr
User avatar
steve99f
Posts: 2769
Joined: Mon Sep 16, 2013 9:49 pm
Location: Eastern PA

Re: Union Cut. Co. Olean NY

Post by steve99f »

The stamp with the outline of North America doesn't look anything like NA. I've checked a few books and realize that is what it is called. What I think it is is a stylized eagle. It has a head and a tail and two wings one on either side. If you look at Ralph Alsip's harness jack and a couple of others, it seems plain to me.

The stylized eagle as a logo would be consistent with a with a company called Union anything so soon after the Civil War.

Just pointing out what I observed while I sit here drinking a purgative in preparation for a "procedure" tomorrow. Check it out.
steve99f
User avatar
peanut740
Gold Tier
Gold Tier
Posts: 7575
Joined: Fri Jan 23, 2009 2:32 pm
Location: Ohio, along the river
Contact:

Re: Union Cut. Co. Olean NY

Post by peanut740 »

It may look somewhat like an eagle,but I'm pretty sure It's North America.Here's the cover of David Anthony's book on Tidioute and they're knife companies. It is a Union Razor knife box cover.They had other things with the Union inside a outline of North America also.
Attachments
1519008687944350330615.jpg
Roger
User avatar
steve99f
Posts: 2769
Joined: Mon Sep 16, 2013 9:49 pm
Location: Eastern PA

Re: Union Cut. Co. Olean NY

Post by steve99f »

No argument if their boxes had that graphic on it then. Thanks Roger. ::tu::
steve99f
User avatar
peanut740
Gold Tier
Gold Tier
Posts: 7575
Joined: Fri Jan 23, 2009 2:32 pm
Location: Ohio, along the river
Contact:

Re: Union Cut. Co. Olean NY

Post by peanut740 »

No problem.I believe we think an outline of the US and not of North America.
Roger
User avatar
Pile Driver
Posts: 340
Joined: Mon May 15, 2017 5:18 pm
Location: North Shore MA

Re: Union Cut. Co. Olean NY

Post by Pile Driver »

A Union Cutlery Co Cattleman knife in stag
Attachments
2018-02-23 12.31.40.jpg
2018-02-23 12.31.14.jpg
User avatar
treefarmer
Gold Tier
Gold Tier
Posts: 12847
Joined: Sun Oct 04, 2009 6:53 am
Location: Florida Panhandle(LA-Lower Alabama)

Re: Union Cut. Co. Olean NY

Post by treefarmer »

Pile Driver,
Looks like you have a real winner! What is the approximate date of mfg on that one?
Treefarmer

A GUN IN THE HAND IS BETTER THAN A COP ON THE PHONE.
User avatar
FRJ
Posts: 15173
Joined: Fri May 14, 2010 1:43 pm
Location: Ct.

Re: Union Cut. Co. Olean NY

Post by FRJ »

What a good looking knife, Pile Driver. ::tu::
How long is it?
Joe
User avatar
RalphAlsip
Posts: 2320
Joined: Sun Feb 02, 2014 9:01 pm
Location: Southern Illinois

Re: Union Cut. Co. Olean NY

Post by RalphAlsip »

Piledriver, that's a beauty! ::tu::
FRJ wrote:What a good looking knife, Pile Driver. ::tu::
How long is it?
Joe my bet is 3 5/8" typical Cattle pattern length.
User avatar
FRJ
Posts: 15173
Joined: Fri May 14, 2010 1:43 pm
Location: Ct.

Re: Union Cut. Co. Olean NY

Post by FRJ »

Thanks Jerry. 3 5/8" is probably right. ::tu::
Joe
User avatar
Pile Driver
Posts: 340
Joined: Mon May 15, 2017 5:18 pm
Location: North Shore MA

Re: Union Cut. Co. Olean NY

Post by Pile Driver »

Right on with the 3-5/8", thanks for the compliments I like this knife a lot
User avatar
FRJ
Posts: 15173
Joined: Fri May 14, 2010 1:43 pm
Location: Ct.

Re: Union Cut. Co. Olean NY

Post by FRJ »

I can understand why. I think it's pretty special.
Joe
stockman
Gold Tier
Gold Tier
Posts: 3665
Joined: Mon Jul 24, 2006 3:19 pm

Re: Union Cut. Co. Olean NY

Post by stockman »

Nice knife pd.

Harold
Post Reply

Return to “KA-BAR Knife Collector's Forum”