paying extra for a Remington
- stumpstalker
- Posts: 216
- Joined: Thu Jul 21, 2016 11:03 am
- Location: Massachusetts
paying extra for a Remington
What do you believe the “premium percentage” would be when buying original (between the Wars) Remington Bullets, such as the R 1273 or R 1123, as opposed to buying a postulated identical knife by another quality maker of the same era?
I am assuming that there is a cachet inherent in the names Remington and Winchester, and am trying to quantify it. The well-known historic and near-mythic gun-making antecedents involved do impart an especial prestige, one that necessarily bestows a higher market value on the original Remingtons and Winchesters, compared with the knives of other comparable makers.
Additionally, what would be your dollar estimate of an excellent condition, or even mint, original R 1273 or R 1123 in today’s market?
I am assuming that there is a cachet inherent in the names Remington and Winchester, and am trying to quantify it. The well-known historic and near-mythic gun-making antecedents involved do impart an especial prestige, one that necessarily bestows a higher market value on the original Remingtons and Winchesters, compared with the knives of other comparable makers.
Additionally, what would be your dollar estimate of an excellent condition, or even mint, original R 1273 or R 1123 in today’s market?
Re: paying extra for a Remington
I don't believe that there is a premium because they are a gun manufacturing company. Look at CASE. They never made guns and one of there big knives like you are describing will bring probably more than a Remington. I might even tend to think that a Remington R1273 might be less cost than another company due to the huge volume of knives that the turned out. Another price difference is who is selling it. If I put the same knife on eBay as a respected seller they will receive more money for there's than I will for mine. Some buyers will pay a premium to say they bought it from so and so.
Re: paying extra for a Remington
One of the values of Remington is the blade etch. Unlike case. Theoretically if the knife has an etch it hasn't been cleaned. Unlike CASE where it can be cleaned by someone who knows what they are doing and most people will call it unused/mint. An original etch definately has value.
- XX Case XX
- Posts: 3577
- Joined: Sat Oct 31, 2015 7:24 pm
- Location: California
Re: paying extra for a Remington
I wholeheartedly agree with that statement. I've seen this happen over & over again. That is absolutely true.espn77 wrote: If I put the same knife on eBay as a respected seller they will receive more money for there's than I will for mine. Some buyers will pay a premium to say they bought it from so and so.
____________
Mike
"If there are no Dogs in Heaven, then when I die, I want to go where they went". Will Rogers
I work hard so my Dog can have a better life...
I work hard so my Dog can have a better life...
- Paladin
- Bronze Tier
- Posts: 11437
- Joined: Sun Apr 08, 2007 12:20 am
- Location: Near Austin, Texas, between a Rock and a Weird Place
- Contact:
Re: paying extra for a Remington
Just my little trivia for the day but Case did make a pistol. At least there was one with their name on it. I remember seeing it in one of Sargent's books....espn77 wrote:I don't believe that there is a premium because they are a gun manufacturing company. Look at CASE. They never made guns and one of there big knives like you are describing will bring probably more than a Remington.
Ray
Paladin
God Bless the USA
Please visit my store SWEETWATER KNIVES
"Buy more ammo" - Johnnie Fain
"I'm glad I ain't scared to be lazy." Augustus McCrae
God Bless the USA
Please visit my store SWEETWATER KNIVES
"Buy more ammo" - Johnnie Fain
"I'm glad I ain't scared to be lazy." Augustus McCrae
- RalphAlsip
- Posts: 2325
- Joined: Sun Feb 02, 2014 9:01 pm
- Location: Southern Illinois
Re: paying extra for a Remington
In my opinion the Bullet patterns that have analogs from other manufacturers of the period sell for comparable prices. For example, the Case large toothpick pattern (6198), in my opinion, is priced comparably to a little higher than the R1613 with the round shield. The R1613 with the bullet shield goes for more because it is very rare so the price premium is based on supply/demand vs. a brand name. The Case 6151L is comparable to the R1253 and my opinion is that prices are comparable with the Case 6151L being a little more in today's (2018) market.stumpstalker wrote:What do you believe the “premium percentage” would be when buying original (between the Wars) Remington Bullets, such as the R 1273 or R 1123, as opposed to buying a postulated identical knife by another quality maker of the same era?
R1123's in excellent (or less) condition are fairly common in my opinion and seem to sell with 3 numbers in their price (i.e., $999 or less). A mint R1123 would likely get into a 4 digit price. R1273's in any condition are uncommon to find, in my experience. A mint R1273 would be a 4 digit price in my opinion.stumpstalker wrote:Additionally, what would be your dollar estimate of an excellent condition, or even mint, original R 1273 or R 1123 in today’s market?
If you are aware of mint original Remington Bullet examples that are available and that you aren't interested in acquiring, I would be grateful to learn more about them.
Re: paying extra for a Remington
There is also regional interest which can drive prices. Case is predominate in the South while up here in the North the older brands command the higher prices. Remingtons were made here in yankee land but to many they are "newcomers" and the early brands such as New York Knife Co, American Knife Co, Empire, etc will usually garner more interest than a Remington bullet or other knife.
- peanut740
- Gold Tier
- Posts: 7590
- Joined: Fri Jan 23, 2009 2:32 pm
- Location: Ohio, along the river
- Contact:
Re: paying extra for a Remington
I can`t think of a knife right off hand that compares to an R1273.Has far as the R1123 there are knives that compare to it.Utica, Kabar and Catt.made a large Trapper.I believe Remington made way more that all the others,maybe even combined.
Roger
- RalphAlsip
- Posts: 2325
- Joined: Sun Feb 02, 2014 9:01 pm
- Location: Southern Illinois
Re: paying extra for a Remington
For reference, these are pictures of the Remington patterns that were mentioned in the original post.
-
- Posts: 642
- Joined: Sun Sep 04, 2011 3:57 am
- Location: Arkansas
- stumpstalker
- Posts: 216
- Joined: Thu Jul 21, 2016 11:03 am
- Location: Massachusetts
Re: paying extra for a Remington
I thank you all for the responses. My premise has been exploded.
Ralph: Thank you for illustrating so nicely the two Bullet Remingtons cited. And, no; I know of no high-condition Bullets available. I was merely trying to pass on some helpful info. to a couple owners of authorized Remington Bullet reproductions. They are not avid knife collecting hobbyists, but rather outdoorsmen with an appreciation of traditionally-styled knives. Still, both individuals have been collector-enough to have kept their Bullets unsharpened, unused and boxed for the years they have owned them. They had been speculating about the comparative values of originals.
My experience with Remington knives is scant. But, I do regret passing up an opportunity 10 years ago to buy a dead mint Remington Moose, a pattern I collect, for $1,000. I was thinking at the time that it would be a preposterous purchase, at least for my finances. But, I still think about that knife.
Ralph: Thank you for illustrating so nicely the two Bullet Remingtons cited. And, no; I know of no high-condition Bullets available. I was merely trying to pass on some helpful info. to a couple owners of authorized Remington Bullet reproductions. They are not avid knife collecting hobbyists, but rather outdoorsmen with an appreciation of traditionally-styled knives. Still, both individuals have been collector-enough to have kept their Bullets unsharpened, unused and boxed for the years they have owned them. They had been speculating about the comparative values of originals.
My experience with Remington knives is scant. But, I do regret passing up an opportunity 10 years ago to buy a dead mint Remington Moose, a pattern I collect, for $1,000. I was thinking at the time that it would be a preposterous purchase, at least for my finances. But, I still think about that knife.
Re: paying extra for a Remington
Winchester and Remington GUN collectors buy knives too-drive up prices...supply and demand--you can buy an old Utica with buffalo head? shield-looks similar-high quality-less money...
- gsmith7158
- Gold Tier
- Posts: 8548
- Joined: Fri Dec 25, 2015 7:25 pm
- Location: Canton, Ga. 100% of the time
- Contact:
Re: paying extra for a Remington
Just simply from boredom I will post a couple of Case 51L's strictly for comparison to the 1273 that Jerry posted.
------------------
Greg
IF YOU AIN'T BUYING OR LOOKING AT A KNIFE THEN YOU AIN'T LIVING.
Always looking to buy good quality Empire knives.
PROUD MEMBER AAPK, NRA.
Greg
IF YOU AIN'T BUYING OR LOOKING AT A KNIFE THEN YOU AIN'T LIVING.
Always looking to buy good quality Empire knives.
PROUD MEMBER AAPK, NRA.
- peanut740
- Gold Tier
- Posts: 7590
- Joined: Fri Jan 23, 2009 2:32 pm
- Location: Ohio, along the river
- Contact:
Re: paying extra for a Remington
Those compare well to an R1253.It is a single blade lockback banana pattern.1273 has 2 blades. Nice knives Greggsmith7158 wrote:Just simply from boredom I will post a couple of Case 51L's strictly for comparison to the 1273 that Jerry posted.
Roger
- gsmith7158
- Gold Tier
- Posts: 8548
- Joined: Fri Dec 25, 2015 7:25 pm
- Location: Canton, Ga. 100% of the time
- Contact:
Re: paying extra for a Remington
Thanks Roger! I'm not at all familiar with Remington pattern numbers, but I think I have seen one of the single blades.peanut740 wrote:Those compare well to an R1253.It is a single blade kickback banana pattern.1273 has 2 blades. Nice knives Greggsmith7158 wrote:Just simply from boredom I will post a couple of Case 51L's strictly for comparison to the 1273 that Jerry posted.
------------------
Greg
IF YOU AIN'T BUYING OR LOOKING AT A KNIFE THEN YOU AIN'T LIVING.
Always looking to buy good quality Empire knives.
PROUD MEMBER AAPK, NRA.
Greg
IF YOU AIN'T BUYING OR LOOKING AT A KNIFE THEN YOU AIN'T LIVING.
Always looking to buy good quality Empire knives.
PROUD MEMBER AAPK, NRA.
- gsmith7158
- Gold Tier
- Posts: 8548
- Joined: Fri Dec 25, 2015 7:25 pm
- Location: Canton, Ga. 100% of the time
- Contact:
Re: paying extra for a Remington
Very nice Keith!espn77 wrote:R1253
------------------
Greg
IF YOU AIN'T BUYING OR LOOKING AT A KNIFE THEN YOU AIN'T LIVING.
Always looking to buy good quality Empire knives.
PROUD MEMBER AAPK, NRA.
Greg
IF YOU AIN'T BUYING OR LOOKING AT A KNIFE THEN YOU AIN'T LIVING.
Always looking to buy good quality Empire knives.
PROUD MEMBER AAPK, NRA.
Re: paying extra for a Remington
Is the bone on the 1123 seen often or do I just need to view it on a larger screen?RalphAlsip wrote:For reference, these are pictures of the Remington patterns that were mentioned in the original post.
Could be I’m not used to seeing one crisp?
I buy roosters combs and farmers..........................................................jack knives [/b]
GEC SFOs and others at LICK CREEK CUTLERY- www.allaboutpocketknives.com/wlf
May the Father and Son bless
Lyle
GEC SFOs and others at LICK CREEK CUTLERY- www.allaboutpocketknives.com/wlf
May the Father and Son bless
Lyle
- RalphAlsip
- Posts: 2325
- Joined: Sun Feb 02, 2014 9:01 pm
- Location: Southern Illinois
Re: paying extra for a Remington
The jigging pattern on my R1123 example is atypical from the normal Rogers jigging found on the Bullets. I have seen a few R1123's with this jigging and have not seen it on any of the other bullet patterns. My speculation, which should not construed as a fact (lol), is that the R1123's with this style of jigging are newer knives made later in the 30's.wlf wrote:Is the bone on the 1123 seen often or do I just need to view it on a larger screen?
Could be I’m not used to seeing one crisp?
Re: paying extra for a Remington
Thanks that's what I would guess.
I buy roosters combs and farmers..........................................................jack knives [/b]
GEC SFOs and others at LICK CREEK CUTLERY- www.allaboutpocketknives.com/wlf
May the Father and Son bless
Lyle
GEC SFOs and others at LICK CREEK CUTLERY- www.allaboutpocketknives.com/wlf
May the Father and Son bless
Lyle
-
- Posts: 642
- Joined: Sun Sep 04, 2011 3:57 am
- Location: Arkansas
Re: paying extra for a Remington
You have probably seen the picture in Mel Brewster’s 1991 edition of “Remington Bullet Knives” pictured on page 3 , his R1123 is made with the same bone as yours. John
John
Re: paying extra for a Remington
I have seen it on 1123's before and sometimes on one side.
Harold
Harold