Schrade-Barnett Collaboration
Schrade-Barnett Collaboration
I have been working and trying to find a Schrade-Barnett Collaboration knife and I have finally met with success! I purchased this little gem this morning....now I have to wait to receive it in the snail mail. Dang it...like a kid at Christmas....chomping at the bit!
Tom
Tom
- Attachments
-
- Schrade Barnett Collaboration.jpg (7.94 KiB) Viewed 3944 times
Re: Schrade-Barnett Collaboration
Oh...Did I fail to Mention....this is a Schrade USA Knife, not a Taylor Brand manufactured in the USA.
This beauty was actually produced in Ellenville, NY.
Tom
This beauty was actually produced in Ellenville, NY.
Tom
Re: Schrade-Barnett Collaboration
Nice catch Tom!!!
I think the only one I have seen was the picture on a flyer.
I didn't know for sure that they had actually been made.
Do you know how many were made?
SWEET find!
I think the only one I have seen was the picture on a flyer.
I didn't know for sure that they had actually been made.
Do you know how many were made?
SWEET find!
Dale
AAPK Administrator
Please visit my AAPK store: www.allaboutpocketknives.com/orvet
Job 13:15
"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
AAPK Administrator
Please visit my AAPK store: www.allaboutpocketknives.com/orvet
Job 13:15
"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
Re: Schrade-Barnett Collaboration
The numbers I have access to say 1000 over a few years Dale. There is a Red one as well...I have my eyes peeled for that one too. Pricey little Devil's though....but worth it as far as I'm concerned!
Tom
Tom
- TripleF
- Bronze Tier
- Posts: 18528
- Joined: Mon Feb 14, 2011 3:42 pm
- Location: West Central FL
- Contact:
Re: Schrade-Barnett Collaboration
That's suhlick!!!
SCOTT
HOME OF THE BRAVE! (not the scarety cats)
Colonial Knife Company History ebook:
https://gumroad.com/l/ZLDb
HOME OF THE BRAVE! (not the scarety cats)
Colonial Knife Company History ebook:
https://gumroad.com/l/ZLDb
Re: Schrade-Barnett Collaboration
That one looks nice and has the numbers and the black screws.
There were only 1000 of each, 1 through 500 marked first production run.
I wish I could find a couple of those, I do not own one and I designed them, I have a couple sheaths that I signed with the wrong pen (non waterproof)lol and still have the only award schrade ever won at the Blade show but no complete knives just parts that I approved.
If you run across any for sale let me know.
VB
There were only 1000 of each, 1 through 500 marked first production run.
I wish I could find a couple of those, I do not own one and I designed them, I have a couple sheaths that I signed with the wrong pen (non waterproof)lol and still have the only award schrade ever won at the Blade show but no complete knives just parts that I approved.
If you run across any for sale let me know.
VB
- jerryd6818
- Gold Tier
- Posts: 39177
- Joined: Sun Jan 04, 2009 5:23 am
- Location: The middle of the top of a bastion of Liberalism.
Re: Schrade-Barnett Collaboration
Bigblade - Welcome to AAPK. I hope you hang around. You sound like a man with a lot of knowledge to share.
My compliments on your design. Very nice. What are the handle materials and what were your thoughts behind the scale look for the green material?
It's not often we get the opportunity to go directly to the source with our questions.
My compliments on your design. Very nice. What are the handle materials and what were your thoughts behind the scale look for the green material?
It's not often we get the opportunity to go directly to the source with our questions.
Forged on the anvil of discipline.
The Few. The Proud.
Jerry D.
This country has become more about sub-groups than about it's unity as a nation.
"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
The Few. The Proud.
Jerry D.
This country has become more about sub-groups than about it's unity as a nation.
"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
Re: Schrade-Barnett Collaboration
I just bought the other Schrade Barnett Collaboration....The RED one! I will post pictures as soon as that baby arrives!
Yahoo
Tom
Yahoo
Tom
-
- Bronze Tier
- Posts: 1101
- Joined: Sat Apr 03, 2010 11:43 am
- Location: Just North of Sydney,Australia.
Re: Schrade-Barnett Collaboration
Hi Tom,Chase wrote:I have been working and trying to find a Schrade-Barnett Collaboration knife and I have finally met with success! I purchased this little gem this morning....now I have to wait to receive it in the snail mail. Dang it...like a kid at Christmas....chomping at the bit!
Tom
Did your Barnett come in the Zipper bag - with the Schrade Barnell tag... Ken
HI FROM AUSTRALIA
A.A.P.N. # 5197: Member of Australian & U.S Blade Forums...KEN -
I collect Schrade knives - made in the U.S.A.- I like the 8OT
A.A.P.N. # 5197: Member of Australian & U.S Blade Forums...KEN -
I collect Schrade knives - made in the U.S.A.- I like the 8OT
Re: Schrade-Barnett Collaboration
Yes Ken....it did! The Red one I just bought is coming in the same way.
Tom
Tom
-
- Bronze Tier
- Posts: 1101
- Joined: Sat Apr 03, 2010 11:43 am
- Location: Just North of Sydney,Australia.
Re: Schrade-Barnett Collaboration
Nice knives Tom,
I have seen them sell for under $200, about 2 years back - they sell for a lot more then that now-a-days.
I found 20 of those zip-up bags for D’holders and Lake & Walkers - One was a Barnett bag… ken
I have seen them sell for under $200, about 2 years back - they sell for a lot more then that now-a-days.
I found 20 of those zip-up bags for D’holders and Lake & Walkers - One was a Barnett bag… ken
HI FROM AUSTRALIA
A.A.P.N. # 5197: Member of Australian & U.S Blade Forums...KEN -
I collect Schrade knives - made in the U.S.A.- I like the 8OT
A.A.P.N. # 5197: Member of Australian & U.S Blade Forums...KEN -
I collect Schrade knives - made in the U.S.A.- I like the 8OT
Re: Schrade-Barnett Collaboration
Here is a picture of the Red Schrade Barnett Collaboration Knife... First Production Run 1 of 500
Tom
Tom
- Attachments
-
- schra1.jpg (7.64 KiB) Viewed 3649 times
- ozzie marie
- Posts: 820
- Joined: Fri Feb 13, 2009 12:57 pm
- Location: Kekoskee Wisconsin
Re: Schrade-Barnett Collaboration
Chase,
Those Barnett's are incredible
Keith
Those Barnett's are incredible
Keith
Loyalty and Respect are not purchased and owned for a lifetime, they are earned everyday.
Please visit my store at:
http://www.allaboutpocketknives.com/ozziemarie
Please visit my store at:
http://www.allaboutpocketknives.com/ozziemarie
Re: Schrade-Barnett Collaboration
I did it again....I came across two more Schrade Barnett Collaborations...
No boxes, sheaths or papers, however, they are both Green. One is Mint and the other is miising a thumb stud
I just couldn't pass those babies up.
I now have a Green "First Production Run" 1 of 500 complete, a Red "First Production Run" 1 of 500 complete, a Green Mint one (just knife) and another Green (just knife) missing a thumb stud.
Anyone interested in adding these to their gathering can PM me! (Neither of the first production runs will be leaving MD).
Tom
No boxes, sheaths or papers, however, they are both Green. One is Mint and the other is miising a thumb stud
I just couldn't pass those babies up.
I now have a Green "First Production Run" 1 of 500 complete, a Red "First Production Run" 1 of 500 complete, a Green Mint one (just knife) and another Green (just knife) missing a thumb stud.
Anyone interested in adding these to their gathering can PM me! (Neither of the first production runs will be leaving MD).
Tom
Re: Schrade-Barnett Collaboration
The one missing the thumb stud has found a new home!
Tom
Tom
Re: Schrade-Barnett Collaboration
I fell in love with the Schrade Barnett knife when I saw it on the Blade magazine cover many years ago. I think that knife set the standard for collaborations between factories and elite knifemakers/designers. I would love to own a Van Barnett original. However, this collaboration knife is as close most can get.
Re: Schrade-Barnett Collaboration
If you notice, on page one, post #6........that is Van Barnett's post. He designed these knives and doesn't have any.
That's a shame!
I had two spares, however, I traded one that was missing the thumbstud to a custom maker member here atvAAPK. I can't wait to see what he does with it.
I still have one spare...just the knife, no paperwork or nylon pouch
Tom
That's a shame!
I had two spares, however, I traded one that was missing the thumbstud to a custom maker member here atvAAPK. I can't wait to see what he does with it.
I still have one spare...just the knife, no paperwork or nylon pouch
Tom
- Schradenut
- Bronze Tier
- Posts: 345
- Joined: Thu May 02, 2013 6:54 am
- Location: Central Coast, NSW Australia
- Contact:
Re: Schrade-Barnett Collaboration
Did Taylor Brands LLC make a copy of the Schrade Barnett knives(Red/Green)?
It appears to me that the etching on these knives is "Schrade Burnett" on the mark side, and "First Production Run, 1 of 500", on the other, and the serial # under the choil. Did the original ones have a USA stamping on them anywhere?
If Taylor's did make one, how do you tell the difference between the Real McCoy and a China made piece of rubbish.
Tony.
It appears to me that the etching on these knives is "Schrade Burnett" on the mark side, and "First Production Run, 1 of 500", on the other, and the serial # under the choil. Did the original ones have a USA stamping on them anywhere?
If Taylor's did make one, how do you tell the difference between the Real McCoy and a China made piece of rubbish.
Tony.
Re: Schrade-Barnett Collaboration
Not sure if Taylor has produced copies of these or not. I would think that Van Barnett would have to agree with that because he did the collaboration with Schrade. Somehow I do not believe Mr. Van Barnett would agree to have one of his Custom knives copied by the Chinese, or anyone else for that matter.
I did go look at my knives and none of them are marked USA.....
Two of them are marked Schrade Barnett on the Mark side and First Production Run 1 of 500 pn the reverse.
I have documentation, from the Schrade factory, that shows they initially made a run of 500 of each (Red & Green) which were marked First Production Run 1 of 500 and then another 500 of each were produced following that.....Only marked Schrade Barnett.
If you have a picture or a link to a knife that says Schrade Burnett, I would sure like to see it.
Tom
I did go look at my knives and none of them are marked USA.....
Two of them are marked Schrade Barnett on the Mark side and First Production Run 1 of 500 pn the reverse.
I have documentation, from the Schrade factory, that shows they initially made a run of 500 of each (Red & Green) which were marked First Production Run 1 of 500 and then another 500 of each were produced following that.....Only marked Schrade Barnett.
If you have a picture or a link to a knife that says Schrade Burnett, I would sure like to see it.
Tom
-
- Posts: 1
- Joined: Fri Nov 17, 2017 7:58 pm
Re: Schrade-Barnett Collaboration
Apologies if I'm breaking rules by driving a sale...
I have the red one for sale with pouch on Ebay if anyone's looking.
https://www.ebay.com/itm/Schrade-Barnet ... Swm3paDz8n
Cheers
I have the red one for sale with pouch on Ebay if anyone's looking.
https://www.ebay.com/itm/Schrade-Barnet ... Swm3paDz8n
Cheers
-
- Bronze Tier
- Posts: 1101
- Joined: Sat Apr 03, 2010 11:43 am
- Location: Just North of Sydney,Australia.
Re: Schrade-Barnett Collaboration
Hi Old Mate, the answer to your question. Is Hold it in you hand.Schradenut wrote:...how do you tell the difference between the Real McCoy and a China made piece of rubbish.
Tony.
I will buy you a drink, before Christmas..... Ken
HI FROM AUSTRALIA
A.A.P.N. # 5197: Member of Australian & U.S Blade Forums...KEN -
I collect Schrade knives - made in the U.S.A.- I like the 8OT
A.A.P.N. # 5197: Member of Australian & U.S Blade Forums...KEN -
I collect Schrade knives - made in the U.S.A.- I like the 8OT