the FRONTIER Series
Re: the FRONTIER Series
Here is a little Frontier I got in the mail last week.
Model #AA-31; 3 inches; ss blade; nickel silver bolsters & liners.
I like the shield that says 'The All Americans'.
This is a solid little knife.
Dale
Model #AA-31; 3 inches; ss blade; nickel silver bolsters & liners.
I like the shield that says 'The All Americans'.
This is a solid little knife.
Dale
Dale
AAPK Administrator
Please visit my AAPK store: www.allaboutpocketknives.com/orvet
Job 13:15
“In a time of universal deceit, telling the truth is a revolutionary act.” - George Orwell
AAPK Administrator
Please visit my AAPK store: www.allaboutpocketknives.com/orvet
Job 13:15
“In a time of universal deceit, telling the truth is a revolutionary act.” - George Orwell
Re: the FRONTIER Series
Got me one of those 4515's coming in the mail. First Frontier for me and I can't wait to get it. Will post pics when it arrives. I didn't really know much about these until I read about them here! TD
A sharp knife is a friend indeed!
Re: the FRONTIER Series
How long were the 4515's made? Thanks TD ....
A sharp knife is a friend indeed!
Re: the FRONTIER Series
TD,
I don't know the dates.
Perhaps Larry (LRV) or Eric (ea42) knows.
Dale
I don't know the dates.
Perhaps Larry (LRV) or Eric (ea42) knows.
Dale
Dale
AAPK Administrator
Please visit my AAPK store: www.allaboutpocketknives.com/orvet
Job 13:15
“In a time of universal deceit, telling the truth is a revolutionary act.” - George Orwell
AAPK Administrator
Please visit my AAPK store: www.allaboutpocketknives.com/orvet
Job 13:15
“In a time of universal deceit, telling the truth is a revolutionary act.” - George Orwell
Re: the FRONTIER Series
Dale - Thanks... I thought they were made from the mid 70's through early 80's but I'm not sure. I'll see if Larry or Eric respond or maybe I'll pm one of them. Anyway, it's a cool EDC. Thanks, TD
A sharp knife is a friend indeed!
Re: the FRONTIER Series
I just found a list with the dates.
The 4515 was made from 1979 to 1986.
I thought I had the info somewhere.
I had some time so I looked for it.
This should help, as I think most of the models are included on here.
Dale
The 4515 was made from 1979 to 1986.
I thought I had the info somewhere.
I had some time so I looked for it.
This should help, as I think most of the models are included on here.
Dale
Dale
AAPK Administrator
Please visit my AAPK store: www.allaboutpocketknives.com/orvet
Job 13:15
“In a time of universal deceit, telling the truth is a revolutionary act.” - George Orwell
AAPK Administrator
Please visit my AAPK store: www.allaboutpocketknives.com/orvet
Job 13:15
“In a time of universal deceit, telling the truth is a revolutionary act.” - George Orwell
Re: the FRONTIER Series
Dale - Thanks bud I'm going to save this one. I'm looking forward to adding a few more of the Frontier knives.... TD
A sharp knife is a friend indeed!
Re: the FRONTIER Series
TD where did you get yours from? I might like having me one too.
-( life is too short to carry a cheap knife )-
Re: the FRONTIER Series
Hi Gino, I won mine on ebay and it was the first one I've ever bid on. I haven't seen many for trade or sale here so that's when I looked on ebay. I received mine on Friday and I just got back from being out of town this weekend. Overall I really like the knife. It's a great EDC. Mine was in good condition but not mint and it didn't come with the box. Let me know if you get one! later, TD.....
A sharp knife is a friend indeed!
Re: the FRONTIER Series
They were pretty common on ebay about 5 years ago.
I bought a lot of then. With a quick check I probably have about 50 of them.
Maybe I can get more pics up of them and put a bunch in my store in a month or so, (too many other things going on at the moment).
The Frontiers seem to be popular as users and many of the used ones you find have some blade loss.
People seemed to like them and use them, much like the Old Timers.
I think Schrade dropped the Frontiers in the mid-1980s after Albert Baer got full control of Imperial.
They were probably too much direct competition with the Old Timers which was Schrade's bread-n-butter line. That is my theory and I know others agree with that consensus.
Dale
I bought a lot of then. With a quick check I probably have about 50 of them.
Maybe I can get more pics up of them and put a bunch in my store in a month or so, (too many other things going on at the moment).
The Frontiers seem to be popular as users and many of the used ones you find have some blade loss.
People seemed to like them and use them, much like the Old Timers.
I think Schrade dropped the Frontiers in the mid-1980s after Albert Baer got full control of Imperial.
They were probably too much direct competition with the Old Timers which was Schrade's bread-n-butter line. That is my theory and I know others agree with that consensus.
Dale
Dale
AAPK Administrator
Please visit my AAPK store: www.allaboutpocketknives.com/orvet
Job 13:15
“In a time of universal deceit, telling the truth is a revolutionary act.” - George Orwell
AAPK Administrator
Please visit my AAPK store: www.allaboutpocketknives.com/orvet
Job 13:15
“In a time of universal deceit, telling the truth is a revolutionary act.” - George Orwell
Re: the FRONTIER Series
Dale - Thanks for the info. That would be great! TD ....
A sharp knife is a friend indeed!
Re: the FRONTIER Series
Here is some from my collection. The 4131,32,33 & 34. A 4135 has already been posted. Enjoy, Don
- superdavemack
- Posts: 113
- Joined: Wed Nov 03, 2010 6:05 pm
- Location: Vancouver,WA
Re: the FRONTIER Series
I just got this very knife the Imperial Frontier Double Eagle 4625 2 blade folding hunter, I bought it at a consignment antique shop and it was'nt cheap but I love the knife, it's a very solid well built heavy knife, I don't know that I'll ever part with it but are these very valuable as collectable knives.....thanks for the pictures I have'nt been able to find but one other photo...I'll post a picture of mine later....when I get a chance.......thanks
Re: the FRONTIER Series - 4625
Regarding the 46 pattern, I have two different "25" types: one has clip and skinning blade with nickel bolsters; the other, clip and spear blade, liner lock, and brass bolsters. I can't find any data in Frontier brochures or price list that support the existence on two different models of same knife. Did Frontier issue two different 4625's? I wonder if it could have been a factory error? For example, I recently found on ebay a 4622 in Gunpowder Black; actually, the numbering system would indicate that the material should have been Ole' Ivory.
Thanks for your input.
Sal
Thanks for your input.
Sal
Re: the FRONTIER Series
Sal,
I have found inconsistencies in Frontier’s numbering system before. I found a blade that belonged in a Gunpowder Black handle in a Sundown Yellow handle. This is not really that unusual.
I guess it stands to reason since they seem to have been made by at least three different companies. –
I have S-cards from Camillus that documents that they made some of them. I also have it on very good authority that Imperial made some in their Providence RI factory. I also have in my collection a Frontier that was made with the Swinden Key like the Old Timers. The only machines that could make knives with the Swinden system were at the Schrade factory in Ellenville.
So with three companies making them, someone is bound to mess up something!
Here is the 4625 as listed in the 1975 info sheets from Imperial Knife Co. Inc., Providence RI.
It clearly shows a drop point blade.
Here is a sheet that gives production dates of the various Frontier models. I do not know the source of this sheet, whether it was put out by Imperial/Schrade or compiled years later by some unknown collector.
You will notice that the 4625 is listed from 1979-1983, yet the pic I just posted is from 1975.
Now we have to pause for a history lesson so this will make sense.
Imperial Knife Associated Companies (IKCO) consisted of Imperial, Schrade and Ulster Knife Co. This consortium was formed around the end of WWII, as I recall without looking it up. Albert Baer (the brother of Henry Baer –‘Uncle Henry’), purchased Ulster Knife Co in 1941. In 1963 Albert Baer bought out the last remaining of the stock in Camillus from the Kastor and Wallace families, after the death of Alfred Kastor. This made him the sole owner of Camillus Cutlery Co.
By now you are getting the idea that Albert Baer was a mover and shaker in the knife industry. About 1984, IKCO was reconsolidated to form Imperial Schrade Corp. I am unclear if Albert Baer was the sole owner of Imperial Schrade, or if this cleared the way for that to happen, but as I understand it he eventually was the sole owner of Camillus and Imperial Schrade, making him the most powerful man in the Cutlery Industry, worldwide.
OK, now back to these two different knives with the same model number.
I suspect that either the dates on the sheet is wrong and the knife is a mistake OR The pattern was changed later when Schrade started making the Frontier knives (and I do not know when that may have been, but I suspect it was in the late 1970s or early 1980s). Remember Imperial & Schrade were both part of IKCO before the Frontier line was ever introduced. The first knife in your picture looks like a Schrade 225 or an Old Timer 25OT. I imagine at the end of the model run they had run out of the drop point blade and finished some off with the secondary blade from the 25OT or the 225.
When the company was reorganized into Imperial Schrade Corp, it was decided that they would discontinue the Frontier line, as it was too much direct completion with the Old Timer brand.
There are a number of inconsistencies associated with these knives, I think it has to do with internal differences within IKCO and then Imperial Schrade Corp.
Much of this information comes from a Frontier collector who used to post here on AAPK as GreatScout.
I hope this makes sense.
Dale
I have found inconsistencies in Frontier’s numbering system before. I found a blade that belonged in a Gunpowder Black handle in a Sundown Yellow handle. This is not really that unusual.
I guess it stands to reason since they seem to have been made by at least three different companies. –
I have S-cards from Camillus that documents that they made some of them. I also have it on very good authority that Imperial made some in their Providence RI factory. I also have in my collection a Frontier that was made with the Swinden Key like the Old Timers. The only machines that could make knives with the Swinden system were at the Schrade factory in Ellenville.
So with three companies making them, someone is bound to mess up something!
Here is the 4625 as listed in the 1975 info sheets from Imperial Knife Co. Inc., Providence RI.
It clearly shows a drop point blade.
Here is a sheet that gives production dates of the various Frontier models. I do not know the source of this sheet, whether it was put out by Imperial/Schrade or compiled years later by some unknown collector.
You will notice that the 4625 is listed from 1979-1983, yet the pic I just posted is from 1975.
Now we have to pause for a history lesson so this will make sense.
Imperial Knife Associated Companies (IKCO) consisted of Imperial, Schrade and Ulster Knife Co. This consortium was formed around the end of WWII, as I recall without looking it up. Albert Baer (the brother of Henry Baer –‘Uncle Henry’), purchased Ulster Knife Co in 1941. In 1963 Albert Baer bought out the last remaining of the stock in Camillus from the Kastor and Wallace families, after the death of Alfred Kastor. This made him the sole owner of Camillus Cutlery Co.
By now you are getting the idea that Albert Baer was a mover and shaker in the knife industry. About 1984, IKCO was reconsolidated to form Imperial Schrade Corp. I am unclear if Albert Baer was the sole owner of Imperial Schrade, or if this cleared the way for that to happen, but as I understand it he eventually was the sole owner of Camillus and Imperial Schrade, making him the most powerful man in the Cutlery Industry, worldwide.
OK, now back to these two different knives with the same model number.
I suspect that either the dates on the sheet is wrong and the knife is a mistake OR The pattern was changed later when Schrade started making the Frontier knives (and I do not know when that may have been, but I suspect it was in the late 1970s or early 1980s). Remember Imperial & Schrade were both part of IKCO before the Frontier line was ever introduced. The first knife in your picture looks like a Schrade 225 or an Old Timer 25OT. I imagine at the end of the model run they had run out of the drop point blade and finished some off with the secondary blade from the 25OT or the 225.
When the company was reorganized into Imperial Schrade Corp, it was decided that they would discontinue the Frontier line, as it was too much direct completion with the Old Timer brand.
There are a number of inconsistencies associated with these knives, I think it has to do with internal differences within IKCO and then Imperial Schrade Corp.
Much of this information comes from a Frontier collector who used to post here on AAPK as GreatScout.
I hope this makes sense.
Dale
Dale
AAPK Administrator
Please visit my AAPK store: www.allaboutpocketknives.com/orvet
Job 13:15
“In a time of universal deceit, telling the truth is a revolutionary act.” - George Orwell
AAPK Administrator
Please visit my AAPK store: www.allaboutpocketknives.com/orvet
Job 13:15
“In a time of universal deceit, telling the truth is a revolutionary act.” - George Orwell
Re: the FRONTIER Series
Hi Dale,
Sorry for not responding sooner -- just wanted to say thanks for the input. It's always good to know that there is such a wealth of knowledge available through the forums and solid citizens like yourself.
Best regards,
Sal
Sorry for not responding sooner -- just wanted to say thanks for the input. It's always good to know that there is such a wealth of knowledge available through the forums and solid citizens like yourself.
Best regards,
Sal
- garddogg56
- Bronze Tier
- Posts: 9067
- Joined: Mon Mar 07, 2011 2:18 am
- Location: Maine Aya up North
Re: the FRONTIER Series
A new twist boys; I have a CRAFTSMAN USA #95091 just like the 4625 pictured above that I got in 1981,on the blade it is etched A.C.A. ANVIL EDGE rust resistant..Who made this for Sears???
"On the Road Again"Willie Nelson
- garddogg56
- Bronze Tier
- Posts: 9067
- Joined: Mon Mar 07, 2011 2:18 am
- Location: Maine Aya up North
Re: the FRONTIER Series
JUST LIKE THIStongueriver wrote:My notes at the time: Double Eagle Folding Hunter, measuring 5 1/4" overall. Has two stainless steel blades, one with the Double Eagle etch. And one blade is secured in the open position by the old fashioned 'press here' liner lock. It's the model 4625... The forty six referring to the pattern, the '2' signifying the two blades, and the '5' meaning that it has hardwood, stabilized handles. Included is the unique packaging these were shipped in for a short while; A little white cotton bag with instructions. Main clip blade is stamped FRONTIER, and picture of powder horn. Blade etched FRONTIER, and Double Eagle, with picture of two eagles inside a circle, and TM. On the other side of the same blade is tang stamped 4625/ IMPERIAL/ STAINLESS. Vertically aligned to the right is U./S./A. The brass liner lock works on this blade. The secondary blade has no liner lock and is a large spear. This type is very unusual in a 5.25 inch hunter pattern. The crescent nail nicks are fairly near the blade tips, rather up at the crest of the spine. The bolsters are yellow brass and have no lanyard hole. The one bolster has a cut out to access the liner lock PRESS area.
"On the Road Again"Willie Nelson
- garddogg56
- Bronze Tier
- Posts: 9067
- Joined: Mon Mar 07, 2011 2:18 am
- Location: Maine Aya up North
Re: the FRONTIER Series
I too have a copy of the Craftsman hunter with the spear and clip blade A.C.A. ( Amazing Cutting Action) etch, I had always thought they were made by Camillus totally. Seems to me I was missing the Imperial factory slant.
Russell
Russell
- garddogg56
- Bronze Tier
- Posts: 9067
- Joined: Mon Mar 07, 2011 2:18 am
- Location: Maine Aya up North
Re: the FRONTIER Series
Rusty; this is the beauty of collecting knives and being on this site This knife in question and most of my Schrades are GREAT hunting knives.I SCUN OUT A MOOSE WITH THIS PARTICULAR KNIFE,but for deer hunting I CARRY A Schrade 158ot and a 34ot all I need
"On the Road Again"Willie Nelson
Re: the FRONTIER Series
Here's a Frontier hunter I have. I hope yours is as well made as mine.
I am very envious of that big spear on your knife and the liner lock on the clip. Nice knife.
I am very envious of that big spear on your knife and the liner lock on the clip. Nice knife.
Joe
- garddogg56
- Bronze Tier
- Posts: 9067
- Joined: Mon Mar 07, 2011 2:18 am
- Location: Maine Aya up North
Re: the FRONTIER Series
Yea, I love the spear, I put this knife up there with the Buck 110 +112 and the Schrade LB7.As far as being tough.
"On the Road Again"Willie Nelson
- ozzie marie
- Posts: 820
- Joined: Fri Feb 13, 2009 12:57 pm
- Location: Kekoskee Wisconsin
Re: the FRONTIER Series
I just received this Frontier 4714.
It's a well built 3" lockback with great looking handles
Keith
It's a well built 3" lockback with great looking handles
Keith
Loyalty and Respect are not purchased and owned for a lifetime, they are earned everyday.
Please visit my store at:
http://www.allaboutpocketknives.com/ozziemarie
Please visit my store at:
http://www.allaboutpocketknives.com/ozziemarie