GEC # 97

GEC specializes in highly collectable and premium quality usable pocket knives. The company's USA manufactured knives have quickly proven to be a big hit with both collectors and users who seek quality American craftsmanship.
User avatar
Greenman
Posts: 139
Joined: Mon Sep 24, 2018 7:31 pm
Location: The Dark Side of the Moon

Re: GEC # 97

Post by Greenman »

Tsar Bomba wrote:How do you screw up the pull on a single-blade jack? This is a disappointing development considering I have 2 en route.
Pull strength is partially the result how much material is removed from a knife's backspring(s) during the hafting process. If the hafter exerts too much pressure on the knife or holds it against the wheel for a few seconds too long, the knife is going to have a weak backspring. Conversely, if you have the intestinal fortitude to attempt it, an overly strong backspring can be “weakened” by re-grinding the spine of the knife. Hence the differences in pull strength that sometimes occur amongst knives of the same pattern from the same batch can oftentimes be explained by the hand-hafting process used by traditional knife manufacturers such as GEC.
Josh

/|\

“Man is the most insane species. He worships an invisible god and destroys a visible nature, unaware that this nature he's destroying is this god he's worshipping.”
— Hubert Reeves
JohnR
Bronze Tier
Bronze Tier
Posts: 1989
Joined: Sat Mar 14, 2015 11:43 am
Location: Maryland

Re: GEC # 97

Post by JohnR »

My ebony arrived today and man what a gorgeous knife, fit and finish is top notch.

As far as pull and snap it is just like the other I received, it is on the light side but does snap firmly into place, I did clean a lot of gunk out of the first one I received and snap improved quite a bit. I've got a couple of vintage original and they feel the same way so a light pull may be inherent to the pattern.
Attachments
IMG_0057.jpg
IMG_0058.jpg
IMG_0061.jpg
IMG_0065.jpg
User avatar
ken98k
Bronze Tier
Bronze Tier
Posts: 3556
Joined: Sat Oct 13, 2012 4:40 pm
Location: Alaska

Re: GEC # 97

Post by ken98k »

I was going to call gec today but, due to the time differences, I wasn't able to. I still feel that a knife of this type and size should have solid and positive "snap" particularly when the blade is open.
I am the NRA.
Let's go Brandon!
HighPlains
Posts: 51
Joined: Wed Nov 14, 2018 7:57 pm

Re: GEC # 97

Post by HighPlains »

ken98k wrote:I was going to call gec today but, due to the time differences, I wasn't able to. I still feel that a knife of this type and size should have solid and positive "snap" particularly when the blade is open.
I would be very curious to know what they say. I’m disappointed with the weak springs as well. On both my Autumn Gold and my American Whittler. They are otherwise great. But Case also has reasonably well polished knives with weak springs and it just doesn’t excite me. To me a strong spring adds character.

It’s especially disappointing on the Northfield blade where the added leverage of the nail nick is so unnecessary that it almost makes a mockery of the spring.

I know that the story is that GEC caught flack from some for the nail breakers on the early year 23’s but my 2012 23 is stronger than my 2007. I consider both reasonable and enjoyable. Different strokes though.

If nothing else I’ve enjoyed a lively conversation on an otherwise slow forum. All the best everyone!
User avatar
ken98k
Bronze Tier
Bronze Tier
Posts: 3556
Joined: Sat Oct 13, 2012 4:40 pm
Location: Alaska

Re: GEC # 97

Post by ken98k »

HighPlains wrote:
ken98k wrote:I was going to call gec today but, due to the time differences, I wasn't able to. I still feel that a knife of this type and size should have solid and positive "snap" particularly when the blade is open.
I would be very curious to know what they say. I’m disappointed with the weak springs as well. On both my Autumn Gold and my American Whittler. They are otherwise great. But Case also has reasonably well polished knives with weak springs and it just doesn’t excite me. To me a strong spring adds character.

It’s especially disappointing on the Northfield blade where the added leverage of the nail nick is so unnecessary that it almost makes a mockery of the spring.

I know that the story is that GEC caught flack from some for the nail breakers on the early year 23’s but my 2012 23 is stronger than my 2007. I consider both reasonable and enjoyable. Different strokes though.

If nothing else I’ve enjoyed a lively conversation on an otherwise slow forum. All the best everyone!
Just got off the phone with GEC. They said, "they were intentionally made with a very light pull due to previous complaints from collectors."
So I guess if you're looking for a "USER", buy a Case or a Rough Rider, as Great Eastern no longer produces knives for actual use, only display models for collectors.
I am the NRA.
Let's go Brandon!
HighPlains
Posts: 51
Joined: Wed Nov 14, 2018 7:57 pm

Re: GEC # 97

Post by HighPlains »

ken98k wrote: Just got off the phone with GEC. They said, "they were intentionally made with a very light pull due to previous complaints from collectors."
I do think there is a happy middle ground. For example, I would say the pulls on all of my 43s was too light and the actions to spongy. But the pulls on my 44s, a later model, were inspiring but not overly tight and the actions are admirably positive and snappy.

It’s too bad to see what seems like backsliding after they nailed on the 44s.

GEC is very dynamic though and I’m still committed to the journey.

I would be curious to hear from lots of different users about what they think an ideal pull would be. Like a personal opinion as well as what would be best for all users.

As I’ve said, personally I prefer 23 and 73 type actions. But I think 44 type actions could reasonably make all parties happy. Thoughts??

Also, Ken, thanks for taking the trouble to make the phone call. What was the conversation like? We’re they receptive to feedback?
User avatar
Tsar Bomba
Posts: 3622
Joined: Fri Jan 30, 2015 5:14 am
Contact:

Re: GEC # 97

Post by Tsar Bomba »

Got my 97s. Checked out the cherrywood Tidioute last night. Toted the ebony NF today.

The snap is fine on both.

Carry on. :mrgreen:
Tony
ImageImageImageImage
Everything's better with a Barlow
User avatar
ken98k
Bronze Tier
Bronze Tier
Posts: 3556
Joined: Sat Oct 13, 2012 4:40 pm
Location: Alaska

Re: GEC # 97

Post by ken98k »

HighPlains wrote:
ken98k wrote: Just got off the phone with GEC. They said, "they were intentionally made with a very light pull due to previous complaints from collectors."
I do think there is a happy middle ground. For example, I would say the pulls on all of my 43s was too light and the actions to spongy. But the pulls on my 44s, a later model, were inspiring but not overly tight and the actions are admirably positive and snappy.

It’s too bad to see what seems like backsliding after they nailed on the 44s.

GEC is very dynamic though and I’m still committed to the journey.

I would be curious to hear from lots of different users about what they think an ideal pull would be. Like a personal opinion as well as what would be best for all users.

As I’ve said, personally I prefer 23 and 73 type actions. But I think 44 type actions could reasonably make all parties happy. Thoughts??

Also, Ken, thanks for taking the trouble to make the phone call. What was the conversation like? We’re they receptive to feedback?
The first lady I spoke with was very pleasant and when I explained what I wanted she said "I don't know but I'll find out". ::tu::
The next person was ready to fight when she got on the phone, and it was obvious right away from her tone, there would be no compromise on her part.
After she explained why GEC knives now have soft pulls, I said "So I guess that means there's nothing that can be done about it, that's just the way it is?" she said YES.
I am the NRA.
Let's go Brandon!
kootenay joe
Posts: 13373
Joined: Mon Jan 11, 2016 5:36 pm
Location: West Kootenays, B.C.

Re: GEC # 97

Post by kootenay joe »

Quote Ken: " "So I guess that means there's nothing that can be done about it, that's just the way it is?" she said YES."
There are 2 ways to interpret this. Was the GEC person saying there is nothing that can be done to improve spring strength on existing #97 knives ?
Or, was she saying soft springs on this pattern will be the case even in future runs ?
I think she was giving the first meaning. But as knifers we already know this. The knife would have to be taken apart and have a stiffer spring inserted and likely need to be re-hafted (new handle pieces) to look decent. It would make more sense to do another run of knives than to take apart & re-build existing ones.
But what is more important is future knives in which something can be done to give stronger springs. The GEC person cannot predict the future. If enough people emailed or phoned GEC asking for stronger springs on future runs it likely would happen. My suggestion is to have 2 runs of springs, one being a bit wimpy and the other being on the stiff side. The knives with the stiffer springs could have the letter "S" added to serial # to denote which knives have the stiff springs. Perhaps not suitable for all patterns but it could be done for the larger knives.
kj
User avatar
Sharpnshinyknives
Gold Tier
Gold Tier
Posts: 5106
Joined: Mon Jul 16, 2018 2:32 am
Location: Indiana
Contact:

Re: GEC # 97

Post by Sharpnshinyknives »

I missed the stag knives that Traditionalpocketknives had today. Didn’t see the email until 3 hours after it came and they were all gone. Sure hope I get another chance on one. If anyone sees these going up somewhere, please post it here. Thanks.
SSk
SSk Mark “Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same.” Ronald Reagan
User avatar
gsmith7158
Gold Tier
Gold Tier
Posts: 8548
Joined: Fri Dec 25, 2015 7:25 pm
Location: Canton, Ga. 100% of the time
Contact:

Re: GEC # 97

Post by gsmith7158 »

I don't know yet what the snap is like on the stag 97 but they sure did sell out quickly at Traditional Pocket Knives.
------------------

Greg

IF YOU AIN'T BUYING OR LOOKING AT A KNIFE THEN YOU AIN'T LIVING.
Always looking to buy good quality Empire knives.

PROUD MEMBER AAPK, NRA.
Onearmbladejunkie
Posts: 805
Joined: Mon Jun 04, 2018 7:23 pm
Contact:

Re: GEC # 97

Post by Onearmbladejunkie »

I bought a GEC#97 Allegheny Sambar Stag knife today from "Traditional Pocket Knives". They received 20 and I got to cherry pick the knife that I really wanted.
s249847959340461643_p1097_i1_w160.jpg
s249847959340461643_p1097_i1_w160.jpg (22.13 KiB) Viewed 4523 times
kootenay joe
Posts: 13373
Joined: Mon Jan 11, 2016 5:36 pm
Location: West Kootenays, B.C.

Re: GEC # 97

Post by kootenay joe »

Great looking Stag 97 !
kj
User avatar
gsmith7158
Gold Tier
Gold Tier
Posts: 8548
Joined: Fri Dec 25, 2015 7:25 pm
Location: Canton, Ga. 100% of the time
Contact:

Re: GEC # 97

Post by gsmith7158 »

Just got to fondle this one today and maybe I'm just lucky but the snap to me is in line with other hunters that I have. Case , Empire, Wostenholm, they all feel the same to me. With the larger blade you just don't need the kind of snap that you get in a stockman or or smaller jack. I am well satisfied with this classic beauty. I just hope the stag that's on the way is as good. :D
Attachments
IMG_5126 (2).JPG
------------------

Greg

IF YOU AIN'T BUYING OR LOOKING AT A KNIFE THEN YOU AIN'T LIVING.
Always looking to buy good quality Empire knives.

PROUD MEMBER AAPK, NRA.
kootenay joe
Posts: 13373
Joined: Mon Jan 11, 2016 5:36 pm
Location: West Kootenays, B.C.

Re: GEC # 97

Post by kootenay joe »

Greg, i don't understand this: " With the larger blade you just don't need the kind of snap that you get in a stockman or or smaller jack."
I associate larger slipjoints with stronger springs and knives like Gent's pen knives with softer springs.
Would you mind explaining why a lesser snap on a larger knife is 'all you need' ?
thanks, note i am not disagreeing, just wanting to learn.
kj
User avatar
WillyCamaro
Posts: 6092
Joined: Thu Jan 10, 2019 4:03 am

Re: GEC # 97

Post by WillyCamaro »

You guys are baddd... ::disgust::
I am almost broke from this last month of starting guitar, new glasses, clothing stock up.
Now i "have" get one for myself...
:lol: :lol: :lol:
"Never, never, never give up."
Winston Churchill

Take therefore no thought for the morrow: for the morrow shall take thought for the things of itself. Sufficient unto the day is the evil thereof.
Matthew 6:34
User avatar
gsmith7158
Gold Tier
Gold Tier
Posts: 8548
Joined: Fri Dec 25, 2015 7:25 pm
Location: Canton, Ga. 100% of the time
Contact:

Re: GEC # 97

Post by gsmith7158 »

kootenay joe wrote:Greg, i don't understand this: " With the larger blade you just don't need the kind of snap that you get in a stockman or or smaller jack."
I associate larger slipjoints with stronger springs and knives like Gent's pen knives with softer springs.
Would you mind explaining why a lesser snap on a larger knife is 'all you need' ?
thanks, note i am not disagreeing, just wanting to learn.
kj
Nothing really scientific on my part Roland it just feels to me like the weight of the larger blades on these hunters kind of equals out the spring strength and the blades just roll into place. The only exception I found was a thin flat grind hunter that snapped fairly hard..
------------------

Greg

IF YOU AIN'T BUYING OR LOOKING AT A KNIFE THEN YOU AIN'T LIVING.
Always looking to buy good quality Empire knives.

PROUD MEMBER AAPK, NRA.
JohnR
Bronze Tier
Bronze Tier
Posts: 1989
Joined: Sat Mar 14, 2015 11:43 am
Location: Maryland

Re: GEC # 97

Post by JohnR »

Knife Connection just listed some stag.
kootenay joe
Posts: 13373
Joined: Mon Jan 11, 2016 5:36 pm
Location: West Kootenays, B.C.

Re: GEC # 97

Post by kootenay joe »

Some very nice stag on the Knife Connection 97's but all are SOLD.
kj
JohnR
Bronze Tier
Bronze Tier
Posts: 1989
Joined: Sat Mar 14, 2015 11:43 am
Location: Maryland

Re: GEC # 97

Post by JohnR »

kootenay joe wrote:Some very nice stag on the Knife Connection 97's but all are SOLD.
kj
That didn't take long, I was able to pick up a pretty nice one, I'm thinking each dealer did not get very many of the stag ones.
kootenay joe
Posts: 13373
Joined: Mon Jan 11, 2016 5:36 pm
Location: West Kootenays, B.C.

Re: GEC # 97

Post by kootenay joe »

The internet connection i have takes a full 2-3 minutes per mouse click to connect. I don't stand a chance.
kj
JohnR
Bronze Tier
Bronze Tier
Posts: 1989
Joined: Sat Mar 14, 2015 11:43 am
Location: Maryland

Re: GEC # 97

Post by JohnR »

Here's the one I picked, you have to do it fast or they disappear while you are looking.
Attachments
GEC-N976119-SS-1.jpg
GEC-N976119-SS-1_alt2.jpg
kootenay joe
Posts: 13373
Joined: Mon Jan 11, 2016 5:36 pm
Location: West Kootenays, B.C.

Re: GEC # 97

Post by kootenay joe »

John, nice knife ! These 97's have excellent stag but i am sure there are not enough of them for all of us who would like to get one. I wonder how many are already on ebay with high B.I.N. price ?
kj
JohnR
Bronze Tier
Bronze Tier
Posts: 1989
Joined: Sat Mar 14, 2015 11:43 am
Location: Maryland

Re: GEC # 97

Post by JohnR »

kootenay joe wrote:John, nice knife ! These 97's have excellent stag but i am sure there are not enough of them for all of us who would like to get one. I wonder how many are already on ebay with high B.I.N. price ?
kj
Thanks Roland, I did see one on Ebay Sat or Sun that had a 175 BIN and it sold fairly fast.
kootenay joe
Posts: 13373
Joined: Mon Jan 11, 2016 5:36 pm
Location: West Kootenays, B.C.

Re: GEC # 97

Post by kootenay joe »

Right now there are no stag 97's listed on ebay. Likely a few will show up. $175 is quite reasonable for secondary market price.
kj
Post Reply

Return to “Great Eastern Cutlery (GEC) Collector's Forum”