What Knife Would You Like GEC To Make ?
Re: What Knife Would You Like GEC To Make ?
I've been wanting them to build a Jumbo Jack, I'm hoping the 86 coming out this year will have the girth of a Jumbo, it's got the length at 3 7/8".
Empire Jumbo and a 77.
Empire Jumbo and a 77.
-
- Posts: 13373
- Joined: Mon Jan 11, 2016 5:36 pm
- Location: West Kootenays, B.C.
Re: What Knife Would You Like GEC To Make ?
JohnR, that's a good idea. A 3 7/8" frame could be another slender Trapper or Jack and be not that different from previous knives of this size.
But if they make a stout jack, well rounded handles and a master blade of thicker stock, a "Jumbo" jack, it would be distinct from any pattern they have offered so far.
What about emailing your suggestion re: Jumbo jack please to GEC ?
kj
But if they make a stout jack, well rounded handles and a master blade of thicker stock, a "Jumbo" jack, it would be distinct from any pattern they have offered so far.
What about emailing your suggestion re: Jumbo jack please to GEC ?
kj
Re: What Knife Would You Like GEC To Make ?
This is a Rough Rider. I love the pattern. The main blade locks open. You press the secondary to release the main.
I would love to see GEC make one like this.
I would love to see GEC make one like this.
David
"Glowing like the metal on the edge of a knife" Meat Loaf
"Glowing like the metal on the edge of a knife" Meat Loaf
Re: What Knife Would You Like GEC To Make ?
kootenay joe wrote:JohnR, that's a good idea. A 3 7/8" frame could be another slender Trapper or Jack and be not that different from previous knives of this size.
But if they make a stout jack, well rounded handles and a master blade of thicker stock, a "Jumbo" jack, it would be distinct from any pattern they have offered so far.
What about emailing your suggestion re: Jumbo jack please to GEC ?
kj
Roland, I have talked to Bill at the Rendezvous about doing Jumbo's and last year he spent some time looking at my vintage ones, liked the knives but did not think they would sell. Thats why I was kind of surprised to see the new 86 frame, a Jumbo could be easily built on that. I think Jumbo's would sell quite well.
-
- Posts: 13373
- Joined: Mon Jan 11, 2016 5:36 pm
- Location: West Kootenays, B.C.
Re: What Knife Would You Like GEC To Make ?
When you look at knife catalogs from before WW II you see many patterns, a wide range of sizes and handle materials. I would like to see GEC make a wider range of distinct patterns. Many of the GEC patterns resemble each other closely, e.g. compare the various #77's with the #78's, slight difference in front bolster shape is the difference.
So i agree with JohnR: let's go for 'more different', be brave, do a run of Jumbo Jacks. People will buy them. They are GEC. We love GEC.
kj
So i agree with JohnR: let's go for 'more different', be brave, do a run of Jumbo Jacks. People will buy them. They are GEC. We love GEC.
kj
Re: What Knife Would You Like GEC To Make ?
A slimline trapper single blade with a spey no shield jigged white bone!
"I don't think you can ever do your best. Doing your best is a process of trying to do your best". Townes Van Zandt
In search of GEC 15 Farm Boy knife user or new(My Grail)
In search of GEC 15 Farm Boy knife user or new(My Grail)
Re: What Knife Would You Like GEC To Make ?
Oh, and I'd like to see more H10 small Bowie fixed blades. And more bottle openers, with bone handles, please. Skip the acrylics, please. I guess I went way over a "knife" wish, and probably exceeded my allotment of "knives" wishes!
Speaking of fixed blades, did anyone see the steak knives that they ran in 2018 up for sale anywhere? I never saw or heard anything about them after the production pics and "GEC Illustrated" cover.
- Lee
Speaking of fixed blades, did anyone see the steak knives that they ran in 2018 up for sale anywhere? I never saw or heard anything about them after the production pics and "GEC Illustrated" cover.
- Lee
Re: What Knife Would You Like GEC To Make ?
I have a #61 and I enjoy it, but my #13 Clerk is twice the knife the #61 half congress is. And at only 1/4" longer.kootenay joe wrote:I agree. The 61 is very fine pattern, especially in the 2 blade Half Congress.
kj
That said, I sure would like to see some more #62s produced.
Re: What Knife Would You Like GEC To Make ?
I personally would love to see the #35 pattern in a stockman configuration, preferably in stainless.
Also think a #14 flipped around version (like the #79 is of the #78) in a single spring, opposite end pen knife would be really neat.
Also think a #14 flipped around version (like the #79 is of the #78) in a single spring, opposite end pen knife would be really neat.
Re: What Knife Would You Like GEC To Make ?
How about something affordable,
and in enough numbers that anybody can actually get one .....
yes, I know ..... blasphemy ....
and in enough numbers that anybody can actually get one .....
yes, I know ..... blasphemy ....
Chris
i woke last night to the sound of thunder
how far off i sat and wondered
started humming a song from nineteen sixty two
aint it funny how the night moves
i woke last night to the sound of thunder
how far off i sat and wondered
started humming a song from nineteen sixty two
aint it funny how the night moves
-
- Posts: 13373
- Joined: Mon Jan 11, 2016 5:36 pm
- Location: West Kootenays, B.C.
Re: What Knife Would You Like GEC To Make ?
The GEC knives start at around $80. I think this is "affordable" by most.And with the last few runs GEC has staggered the releases and this has led to the knives being available for up to a week or longer for some. The availability now is much improved from a year ago and longer.
kj
kj
Re: What Knife Would You Like GEC To Make ?
Agreed. If somebody wants endless supply of slipjoints at $40-60, that's what Case is for. With that comes average fit and finish and sometimes questionable QC.
-
- Posts: 13373
- Joined: Mon Jan 11, 2016 5:36 pm
- Location: West Kootenays, B.C.
Re: What Knife Would You Like GEC To Make ?
Ajd, can you post a pic of a 61 & a 13 together so we can see the size comparison ? I have a 61 but no #13.
kj
kj
Re: What Knife Would You Like GEC To Make ?
I stand corrected. The #13 and #61 are pretty much identical in length, (#61 might actually be a fraction of a MM longer) but the #13 brings half an inch more main blade to the table (#13 2 7/8" #61 2 3/8".) In terms of actual cutting edge, according to the 'ol calipers, the #61 has 2.15" and the #13 has 2.6".
I also think the #13 feels better in hand. But that's all personal preference.
I also think the #13 feels better in hand. But that's all personal preference.
Re: What Knife Would You Like GEC To Make ?
Your suggestion of the "flipped" #14 is what I had in mind with the #09 Esquire. At 2-7/8" the 09 is very close to the 3" size of the 14. I'm also a fan of the #35. I think GEC could produce endless variations on the 35 frame. Every time I carry my Vic Alox Soldier or Electrician I think of the possibilities GEC could realize on the #35.Ajd3530 wrote:I personally would love to see the #35 pattern in a stockman configuration, preferably in stainless.
Also think a #14 flipped around version (like the #79 is of the #78) in a single spring, opposite end pen knife would be really neat.
Regarding your opinion of the #13: I don't own a congress knife nor have I handled one, but I know it's a traditional pattern. Can you comment on what you like about the congress shape? You mentioned it feels good in hand, but I don't see the utility in the shape. GEC made a #13 in a sheepsfoot main with a pen secondary, which is the blade configuration I'm looking for in a smallish knife to pair with a medium clip single. But I'm on the fence about the congress pattern. I recently got a Case stockman with square bolsters that actually dig into my palm during use. Do you find the congress square bolsters to be ergonomic?
-Lee
- KnifeSlinger#81
- Posts: 4171
- Joined: Tue Aug 11, 2015 8:50 pm
- Location: Oklahoma
- Contact:
Re: What Knife Would You Like GEC To Make ?
I would LOVE to see a 35 cattle knife.m0nk wrote:I'm also a fan of the #35. I think GEC could produce endless variations on the 35 frame. Every time I carry my Vic Alox Soldier or Electrician I think of the possibilities GEC could realize on the #35.
-Lee
-Paul T.
WANTED: Shapleigh Diamond Edge branded Schrades in good condition.
WANTED: Shapleigh Diamond Edge branded Schrades in good condition.
- RalphAlsip
- Posts: 2320
- Joined: Sun Feb 02, 2014 9:01 pm
- Location: Southern Illinois
Re: What Knife Would You Like GEC To Make ?
Paul, are you thinking something like this? This is a photoshop mock up. The nail nick on the sheepsfoot would probably be facing toward the back on a real knife.KnifeSlinger#81 wrote:I would LOVE to see a 35 cattle knife.
- KnifeSlinger#81
- Posts: 4171
- Joined: Tue Aug 11, 2015 8:50 pm
- Location: Oklahoma
- Contact:
Re: What Knife Would You Like GEC To Make ?
That would be great. Nice photoshop. I prefer a 3rd blade but I'd buy one with a punch too.RalphAlsip wrote:Paul, are you thinking something like this? This is a photoshop mock up. The nail nick on the sheepsfoot would probably be facing toward the back on a real knife.KnifeSlinger#81 wrote:I would LOVE to see a 35 cattle knife.
-Paul T.
WANTED: Shapleigh Diamond Edge branded Schrades in good condition.
WANTED: Shapleigh Diamond Edge branded Schrades in good condition.
Re: What Knife Would You Like GEC To Make ?
Lee,m0nk wrote:Your suggestion of the "flipped" #14 is what I had in mind with the #09 Esquire. At 2-7/8" the 09 is very close to the 3" size of the 14. I'm also a fan of the #35. I think GEC could produce endless variations on the 35 frame. Every time I carry my Vic Alox Soldier or Electrician I think of the possibilities GEC could realize on the #35.Ajd3530 wrote:I personally would love to see the #35 pattern in a stockman configuration, preferably in stainless.
Also think a #14 flipped around version (like the #79 is of the #78) in a single spring, opposite end pen knife would be really neat.
Regarding your opinion of the #13: I don't own a congress knife nor have I handled one, but I know it's a traditional pattern. Can you comment on what you like about the congress shape? You mentioned it feels good in hand, but I don't see the utility in the shape. GEC made a #13 in a sheepsfoot main with a pen secondary, which is the blade configuration I'm looking for in a smallish knife to pair with a medium clip single. But I'm on the fence about the congress pattern. I recently got a Case stockman with square bolsters that actually dig into my palm during use. Do you find the congress square bolsters to be ergonomic?
-Lee
I hadn't realized the #09 Esquire was that size, I had always thought it was in the 2 5/8 range like the Pembertons .
To me, granted I do not have especially large hands, the #13 presents no problems in hand. I find its gentle curve fits in quite well along the base of my fingers. Its bolsters are slightly pinched, and I've never had any problems in the pocket with it. It is far more pocket friendly than the Northfiled #61s.
- Sharpnshinyknives
- Gold Tier
- Posts: 5106
- Joined: Mon Jul 16, 2018 2:32 am
- Location: Indiana
- Contact:
Re: What Knife Would You Like GEC To Make ?
Lee, I have several Congresses and I do find them awkward to use and some blades nearly impossible to open. I don’t have a GEC Congress to compare. I have several Case, Boker, Green River, S&M, H&R and others I can’t remember. The Schatt and Morgan is the easiest to open and the easiest on the hands to use. The bolsters are a bit smoother on the ends too.m0nk wrote:Your suggestion of the "flipped" #14 is what I had in mind with the #09 Esquire. At 2-7/8" the 09 is very close to the 3" size of the 14. I'm also a fan of the #35. I think GEC could produce endless variations on the 35 frame. Every time I carry my Vic Alox Soldier or Electrician I think of the possibilities GEC could realize on the #35.Ajd3530 wrote:I personally would love to see the #35 pattern in a stockman configuration, preferably in stainless.
Also think a #14 flipped around version (like the #79 is of the #78) in a single spring, opposite end pen knife would be really neat.
Regarding your opinion of the #13: I don't own a congress knife nor have I handled one, but I know it's a traditional pattern. Can you comment on what you like about the congress shape? You mentioned it feels good in hand, but I don't see the utility in the shape. GEC made a #13 in a sheepsfoot main with a pen secondary, which is the blade configuration I'm looking for in a smallish knife to pair with a medium clip single. But I'm on the fence about the congress pattern. I recently got a Case stockman with square bolsters that actually dig into my palm during use. Do you find the congress square bolsters to be ergonomic?
-Lee
I found that with Congresses it’s a good idea to try and handle them first before you buy.
SSk
SSk Mark “Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same.” Ronald Reagan
Re: What Knife Would You Like GEC To Make ?
Good pics and good info guys, thanks. I wonder if GEC is going to do another run of 15s this year? The last run of Beer Scouts was in 2016. We could only be so lucky to get a run of Beer Scouts, or Soda Scouts, or even Crown Lifters in 2019. Any of those with a classic GEC straight clip blade would be amazing.
This thread has sure brought out a lot of wishes for 2019!
-Lee
This thread has sure brought out a lot of wishes for 2019!
-Lee
Re: What Knife Would You Like GEC To Make ?
Ok. Go ahead and give me a Moose on the #35 frame as well. And a single bladed jack with a spear while your at it. Both in Northfield trim. Please and thank you.Ajd3530 wrote:I personally would love to see the #35 pattern in a stockman configuration, preferably in stainless.
Also think a #14 flipped around version (like the #79 is of the #78) in a single spring, opposite end pen knife would be really neat.
Re: What Knife Would You Like GEC To Make ?
An 81 Abilene, ebony scales with the Templar trim set into the wood. I mean they inset the shields why not at least partially inset the Templar bolsters. Stainless steel blades would really top it off.
I don't think it will ever happen, but a boy can dream can't he...
I don't think it will ever happen, but a boy can dream can't he...
Trace
Re: What Knife Would You Like GEC To Make ?
Have they ever done a Camp or Scout knife? I think that would br fantastic. I have been wanting one of these, so a GEC could be my first.
Larry
Larry
Larry
Each one, teach one.
Each one, teach one.
Re: What Knife Would You Like GEC To Make ?
boykinlp wrote:Have they ever done a Camp or Scout knife? I think that would br fantastic. I have been wanting one of these, so a GEC could be my first.
Larry
Trace