What Knife Would You Like GEC To Make ?

[JohnR]

I've been wanting them to build a Jumbo Jack, I'm hoping the 86 coming out this year will have the girth of a Jumbo, it's got the length at 3 7/8".

Empire Jumbo and a 77.

[kootenay joe]

JohnR, that's a good idea. A 3 7/8" frame could be another slender Trapper or Jack and be not that different from previous knives of this size.
But if they make a stout jack, well rounded handles and a master blade of thicker stock, a "Jumbo" jack, it would be distinct from any pattern they have offered so far.
What about emailing your suggestion re: Jumbo jack please to GEC ?
kj

[edge213]

This is a Rough Rider. I love the pattern. The main blade locks open. You press the secondary to release the main.
I would love to see GEC make one like this.

[JohnR]

JohnR, that's a good idea. A 3 7/8" frame could be another slender Trapper or Jack and be not that different from previous knives of this size.
But if they make a stout jack, well rounded handles and a master blade of thicker stock, a "Jumbo" jack, it would be distinct from any pattern they have offered so far.
What about emailing your suggestion re: Jumbo jack please to GEC ?
kj

Roland, I have talked to Bill at the Rendezvous about doing Jumbo's and last year he spent some time looking at my vintage ones, liked the knives but did not think they would sell. Thats why I was kind of surprised to see the new 86 frame, a Jumbo could be easily built on that. I think Jumbo's would sell quite well.

[kootenay joe]

When you look at knife catalogs from before WW II you see many patterns, a wide range of sizes and handle materials. I would like to see GEC make a wider range of distinct patterns. Many of the GEC patterns resemble each other closely, e.g. compare the various #77's with the #78's, slight difference in front bolster shape is the difference.
So i agree with JohnR: let's go for 'more different', be brave, do a run of Jumbo Jacks. People will buy them. They are GEC. We love GEC.
kj

[Drukai]

A slimline trapper single blade with a spey no shield jigged white bone!

[m0nk]

Oh, and I'd like to see more H10 small Bowie fixed blades. And more bottle openers, with bone handles, please. Skip the acrylics, please. I guess I went way over a "knife" wish, and probably exceeded my allotment of "knives" wishes!

Speaking of fixed blades, did anyone see the steak knives that they ran in 2018 up for sale anywhere? I never saw or heard anything about them after the production pics and "GEC Illustrated" cover.

- Lee

[Ajd3530]

I agree. The 61 is very fine pattern, especially in the 2 blade Half Congress.
kj

I have a #61 and I enjoy it, but my #13 Clerk is twice the knife the #61 half congress is. And at only 1/4" longer.

That said, I sure would like to see some more #62s produced.

[Ajd3530]

I personally would love to see the #35 pattern in a stockman configuration, preferably in stainless.

Also think a #14 flipped around version (like the #79 is of the #78) in a single spring, opposite end pen knife would be really neat.

[royal0014]

How about something affordable,
and in enough numbers that anybody can actually get one .....



yes, I know ..... blasphemy ....

[kootenay joe]

The GEC knives start at around $80. I think this is "affordable" by most.And with the last few runs GEC has staggered the releases and this has led to the knives being available for up to a week or longer for some. The availability now is much improved from a year ago and longer.
kj

[Ajd3530]

Agreed. If somebody wants endless supply of slipjoints at $40-60, that's what Case is for. With that comes average fit and finish and sometimes questionable QC.

[kootenay joe]

Ajd, can you post a pic of a 61 & a 13 together so we can see the size comparison ? I have a 61 but no #13.
kj

[Ajd3530]

I stand corrected. The #13 and #61 are pretty much identical in length, (#61 might actually be a fraction of a MM longer) but the #13 brings half an inch more main blade to the table (#13 2 7/8" #61 2 3/8".) In terms of actual cutting edge, according to the 'ol calipers, the #61 has 2.15" and the #13 has 2.6".

I also think the #13 feels better in hand. But that's all personal preference.

[m0nk]

I personally would love to see the #35 pattern in a stockman configuration, preferably in stainless.

Also think a #14 flipped around version (like the #79 is of the #78) in a single spring, opposite end pen knife would be really neat.

Your suggestion of the "flipped" #14 is what I had in mind with the #09 Esquire. At 2-7/8" the 09 is very close to the 3" size of the 14. I'm also a fan of the #35. I think GEC could produce endless variations on the 35 frame. Every time I carry my Vic Alox Soldier or Electrician I think of the possibilities GEC could realize on the #35.

Regarding your opinion of the #13: I don't own a congress knife nor have I handled one, but I know it's a traditional pattern. Can you comment on what you like about the congress shape? You mentioned it feels good in hand, but I don't see the utility in the shape. GEC made a #13 in a sheepsfoot main with a pen secondary, which is the blade configuration I'm looking for in a smallish knife to pair with a medium clip single. But I'm on the fence about the congress pattern. I recently got a Case stockman with square bolsters that actually dig into my palm during use. Do you find the congress square bolsters to be ergonomic?

-Lee