Page 1 of 8

Re: What Knife Would You Like GEC To Make ?

Posted: Fri Dec 14, 2018 12:38 am
by edge213
Tsar Bomba wrote:I respectfully disagree - t'ain't nothin' dull about 'em IMO.
Great knives!

Re: What Knife Would You Like GEC To Make ?

Posted: Fri Dec 14, 2018 12:14 pm
by m0nk
Tsar Bomba wrote:I only have one wish left that GEC hasn't fulfilled - the granddaddy Barlow. :mrgreen:
I've been thinking more and more about a Barlow, and I couldn't get ahold of a new GEC Barlow. Looking at old ones, regretting not getting a S&M barlow while I could, even considered an Italian Lion steel... So Colonial recently put up some of their new/old stock knives that they closed out back in the '80s, and I bought myself a Colonial Barlow 392 for Christmas. I just checked the other day and the 392s are all gone, but they still have the Old Cutler bone handled Barlows, and they're probably very nice. Anyway, that 392 Barlow is absolutely the worst fit and finish of any knife I've seen. Almost garbage. But I wanted it to be a user, and it was only $30 with shipping so I'm keeping it. I can see why the old Colonial company went out of business, and I'm happy to report that the new US-made knives from Colonial are much much nicer.

I'm going to unwrap that 392 on Christmas and carry it often. I hope that every time I take it out and cringe at it's poor quality, Mr. Howard gets a vibe to make a big run of GEC Barlows. Not an SFO that you have to be a member of a secret society to get, but a real big run for us Average Joes, like the 78 run a year ago. You can still get 78s today, which is how it should be IMO.

- Lee

Re: What Knife Would You Like GEC To Make ?

Posted: Mon Dec 17, 2018 6:27 pm
by biglmbass
I want this, in coal black ebony with the same shield as shown. Put a bolster on their 47 frame & they'd have it. Wouldn't hurt my feelings if the blade stock was heavier than usual. Would probably take the same knife in jigged bone too. Ebony to start though.

Re: What Knife Would You Like GEC To Make ?

Posted: Mon Dec 17, 2018 8:04 pm
by kootenay joe
Good idea ! The swayback frame feels good in hand and it would have 2 full sized blades and is not a Trapper. Maybe send this picture to GEC ? As you say they already have the 47 frame so it would not take an all new set up.
kj

Re: What Knife Would You Like GEC To Make ?

Posted: Mon Dec 17, 2018 8:09 pm
by rangerbluedog
More 85 patterns and 33 conductor's whittlers ::nod::

Re: What Knife Would You Like GEC To Make ?

Posted: Mon Dec 17, 2018 9:19 pm
by robbobus
That is a nice knife, but I prefer a full size blade and a pen size blade. 47 frame, plus another in 3/4 size.

Re: What Knife Would You Like GEC To Make ?

Posted: Mon Dec 17, 2018 10:12 pm
by tongueriver
I would like to see a full-length (4 1/2 inches?) classic English jack in all sorts of variations. It would break my bank. Meanwhile I have been enjoying my little group of 65s. I do carry one of them in ebony in case I run into a sandwich to be dressed. I need to learn to use a camera; this scan makes the knives look horrible; they are all lovely and mint except my pb&j knife.
65 pattern group001 - Copy.jpg

Re: What Knife Would You Like GEC To Make ?

Posted: Mon Dec 17, 2018 10:45 pm
by RalphAlsip
gsmith7158 wrote:should a whittler in that configuration be created as well I would certainly be a buyer. ::tu::
Greg, is this what you are talking about? :) Please note this is a mock up based on the blades in the GEC 79 workhorse whittler combined with a 79 Northwoods Fremont giraffe frame. The whittler blades are taken from an internet picture.
http://greateasterncutlery.net/blog/pat ... -whittler/

Re: What Knife Would You Like GEC To Make ?

Posted: Mon Dec 17, 2018 11:31 pm
by gsmith7158
Jerry I'm going to nominate you as consultant extraordinaire to GEC! I would buy that. ::tu::

Re: What Knife Would You Like GEC To Make ?

Posted: Mon Dec 17, 2018 11:34 pm
by kootenay joe
Jerry, you could do design work for GEC. Send them some of your mock-ups. Even if you don't get on the payroll maybe you will get a first choice gift knife in return.
kj

Re: What Knife Would You Like GEC To Make ?

Posted: Tue Dec 18, 2018 1:35 am
by RalphAlsip
Greg and Roland, thank you for the encouragement. I'm sure GEC has actual knife designers who have creative talent and knife construction knowledge and experience. There is not much creativity or inspiration involved in the photo editing that I'm doing which is cropping the blades of off one 79 pattern and pasting them on another.

Re: What Knife Would You Like GEC To Make ?

Posted: Sun Dec 30, 2018 3:36 pm
by Lansky1
remake of the acrylic 2 blade congress #61 - super little knife

Re: What Knife Would You Like GEC To Make ?

Posted: Sun Dec 30, 2018 8:37 pm
by kootenay joe
I agree. The 61 is very fine pattern, especially in the 2 blade Half Congress.
kj

Re: What Knife Would You Like GEC To Make ?

Posted: Sun Jan 06, 2019 4:58 am
by m0nk
KJ, please consider my earlier post in this thread regarding barlows to be barlow musing only. What I really want GEC to make would have to be broken into three categories: work knife, EDC, and collectible. My wishes are as follows:

For a work knife, I would like to see a #35 F&F Calf Pen variant, but with a straight clip and large sheepsfoot, and no liner lock. The middle separator flat head screwdriver can stay. Without the liner lock this would be a little thinner than the original Calf Pen, and the substitution of the straight clip for one-arm blade would increase pocketability and marketability. For covers I'd like to see black, maroon, and red linen micarta options.

For EDC, I really need two knives: a #77 single straight clip, and a #09 Esquire with a sheepsfoot main and pen secondary. Why not just carry a stockman? Well, because to get the size clip blade I'm looking for I would need a larger stockman, which would not be as thin as I would like. Thinness has become more important to me lately, and a #77 clip single would be the sweet spot for blade size and overall thinness. A #09 with a sheepsfoot main would give the perfect size utility knife and the ideal size pen blade, IMO. Of course I'd want matching cover materials, and GEC has done lots of nice candidates in the past: sawcut caramel bone, or perhaps blue giraffe bone would be awesome. Antique ivory paper micarta would also be a very classy option for these two matching knives.

For the collectible category, my one wish would be a duplicate of the famous Northwoods Fremont Jack in blue mammoth ivory. (KSF pic, not mine)
mammoth_ivory_fremont_jack.jpg
- Lee

Re: What Knife Would You Like GEC To Make ?

Posted: Sun Jan 06, 2019 6:29 pm
by kootenay joe
Good post Lee. Well thought out. Thanks.
kj

Re: What Knife Would You Like GEC To Make ?

Posted: Sun Jan 06, 2019 7:41 pm
by JohnR
I've been wanting them to build a Jumbo Jack, I'm hoping the 86 coming out this year will have the girth of a Jumbo, it's got the length at 3 7/8".

Empire Jumbo and a 77.

Re: What Knife Would You Like GEC To Make ?

Posted: Sun Jan 06, 2019 7:58 pm
by kootenay joe
JohnR, that's a good idea. A 3 7/8" frame could be another slender Trapper or Jack and be not that different from previous knives of this size.
But if they make a stout jack, well rounded handles and a master blade of thicker stock, a "Jumbo" jack, it would be distinct from any pattern they have offered so far.
What about emailing your suggestion re: Jumbo jack please to GEC ?
kj

Re: What Knife Would You Like GEC To Make ?

Posted: Sun Jan 06, 2019 9:36 pm
by edge213
This is a Rough Rider. I love the pattern. The main blade locks open. You press the secondary to release the main.
I would love to see GEC make one like this.

Re: What Knife Would You Like GEC To Make ?

Posted: Sun Jan 06, 2019 9:50 pm
by JohnR
kootenay joe wrote:JohnR, that's a good idea. A 3 7/8" frame could be another slender Trapper or Jack and be not that different from previous knives of this size.
But if they make a stout jack, well rounded handles and a master blade of thicker stock, a "Jumbo" jack, it would be distinct from any pattern they have offered so far.
What about emailing your suggestion re: Jumbo jack please to GEC ?
kj

Roland, I have talked to Bill at the Rendezvous about doing Jumbo's and last year he spent some time looking at my vintage ones, liked the knives but did not think they would sell. Thats why I was kind of surprised to see the new 86 frame, a Jumbo could be easily built on that. I think Jumbo's would sell quite well.

Re: What Knife Would You Like GEC To Make ?

Posted: Sun Jan 06, 2019 11:20 pm
by kootenay joe
When you look at knife catalogs from before WW II you see many patterns, a wide range of sizes and handle materials. I would like to see GEC make a wider range of distinct patterns. Many of the GEC patterns resemble each other closely, e.g. compare the various #77's with the #78's, slight difference in front bolster shape is the difference.
So i agree with JohnR: let's go for 'more different', be brave, do a run of Jumbo Jacks. People will buy them. They are GEC. We love GEC.
kj

Re: What Knife Would You Like GEC To Make ?

Posted: Mon Jan 07, 2019 5:45 am
by Drukai
A slimline trapper single blade with a spey no shield jigged white bone!

Re: What Knife Would You Like GEC To Make ?

Posted: Wed Jan 09, 2019 12:47 am
by m0nk
Oh, and I'd like to see more H10 small Bowie fixed blades. And more bottle openers, with bone handles, please. Skip the acrylics, please. I guess I went way over a "knife" wish, and probably exceeded my allotment of "knives" wishes!

Speaking of fixed blades, did anyone see the steak knives that they ran in 2018 up for sale anywhere? I never saw or heard anything about them after the production pics and "GEC Illustrated" cover.

- Lee

Re: What Knife Would You Like GEC To Make ?

Posted: Sat Feb 16, 2019 8:13 am
by Ajd3530
kootenay joe wrote:I agree. The 61 is very fine pattern, especially in the 2 blade Half Congress.
kj
I have a #61 and I enjoy it, but my #13 Clerk is twice the knife the #61 half congress is. And at only 1/4" longer.

That said, I sure would like to see some more #62s produced.

Re: What Knife Would You Like GEC To Make ?

Posted: Sat Feb 16, 2019 8:16 am
by Ajd3530
I personally would love to see the #35 pattern in a stockman configuration, preferably in stainless.

Also think a #14 flipped around version (like the #79 is of the #78) in a single spring, opposite end pen knife would be really neat.

Re: What Knife Would You Like GEC To Make ?

Posted: Sat Feb 16, 2019 1:09 pm
by royal0014
How about something affordable,
and in enough numbers that anybody can actually get one .....

::huff::

yes, I know ..... blasphemy ....