What Knife Would You Like GEC To Make ?
- Open Range-19
- Bronze Tier
- Posts: 216
- Joined: Wed May 30, 2018 3:24 pm
- Location: Western US
Re: What Knife Would You Like GEC To Make ?
kootenay joe,
Yep, 541214. Like it even better than this 541209 which is no slouch either. Plain Jane has quiet class for my taste.
Yep, 541214. Like it even better than this 541209 which is no slouch either. Plain Jane has quiet class for my taste.
- Open Range-19
- Bronze Tier
- Posts: 216
- Joined: Wed May 30, 2018 3:24 pm
- Location: Western US
Re: What Knife Would You Like GEC To Make ?
Honest to gosh I keyed "lignum vitae" iPhone is messing with me. In my youth ran across that wood at the remains of a water powered mill in Canada. Able to handle a large bearing made of it. Looked at some wood carvers mallets as well.
-
- Posts: 805
- Joined: Mon Jun 04, 2018 7:23 pm
- Contact:
Re: What Knife Would You Like GEC To Make ?
GREAT EASTERN CUTLERY WILL BE MAKING A #93 SWAY-BACK KNIFE IN JUNE. I HOPE SOMEDAY THAT GEC WILL MAKE A SWAY-BACK KNIFE WITH A SINGLE SPEAR BLADE.
-
- Posts: 805
- Joined: Mon Jun 04, 2018 7:23 pm
- Contact:
Re: What Knife Would You Like GEC To Make ?
A GEC#93 SWAY-BACK SPEAR BLADE WOULD BE A TOP SELLER !
-
- Gold Tier
- Posts: 2187
- Joined: Tue Feb 08, 2011 7:37 pm
- Location: westminster sc
- Contact:
Re: What Knife Would You Like GEC To Make ?
Onearmbladejunkie wrote:A GEC#93 SWAY-BACK SPEAR BLADE WOULD BE A TOP SELLER ! thZ3ZTUB1D.jpg
-
- Posts: 13373
- Joined: Mon Jan 11, 2016 5:36 pm
- Location: West Kootenays, B.C.
Re: What Knife Would You Like GEC To Make ?
The S&M you show is a Curved Jack not a Swayback in which handle curves the other way, concave spine.
kj
kj
-
- Posts: 805
- Joined: Mon Jun 04, 2018 7:23 pm
- Contact:
Re: What Knife Would You Like GEC To Make ?
I was not sure . I am learning ! Thank you so very much. I need correction in my life. I hate being knife stupid ! Thank you sir !!!kootenay joe wrote:The S&M you show is a Curved Jack not a Swayback in which handle curves the other way, concave spine.
kj
-
- Posts: 13373
- Joined: Mon Jan 11, 2016 5:36 pm
- Location: West Kootenays, B.C.
Re: What Knife Would You Like GEC To Make ?
We all are "knife stupid" to some degree and we all began knowing very little about knives. "Knives" encompass a huge body of knowledge. No one ever learns more than just a fraction of what is out there about knives.
You are not "knife stupid" but more likely just early in the learning curve. And we all learn by making mistakes and having someone correct it for us.
I make mistakes all the time; i.e. i am continually learning thanks to others here.
kj
You are not "knife stupid" but more likely just early in the learning curve. And we all learn by making mistakes and having someone correct it for us.
I make mistakes all the time; i.e. i am continually learning thanks to others here.
kj
-
- Posts: 805
- Joined: Mon Jun 04, 2018 7:23 pm
- Contact:
Re: What Knife Would You Like GEC To Make ?
Onearmbladejunkie wrote: A GEC "CURVED JACK-KNIFE" "KENTUCKEY SHINER" "SADDLEHORN" STYLE KNIVES IN SINGLE CLIPBLADE & SPEAR BLADE WOULD BE A TOP SELLER ! 4 TO 4 1/2" closed thZ3ZTUB1D.jpg
-
- Posts: 805
- Joined: Mon Jun 04, 2018 7:23 pm
- Contact:
Re: What Knife Would You Like GEC To Make ?
The GEC#44 Gunstock was a big hit in 2018. The GEC#22 Magnum was made in 2014. It is time to bring that knife back in single blade. 2 5/8" closed , this would make a great single blade knife. All of the 2014 22 magnums were made with double blades. It is time for a GEC#22 Magnum in single blade.
-
- Posts: 805
- Joined: Mon Jun 04, 2018 7:23 pm
- Contact:
Re: What Knife Would You Like GEC To Make ?
The GEC#86s will be released later this year. I want a Northfield single blade #86 smooth oily creek bone with guitar shield. 4/12/2019 was "ROCK AROUND THE CLOCK"'S first release. Put nothing extra on this knife to avoid paying copy rights. Smooth Oily Creek bone , because the rockers oiled their hair. The guitar is the symbol of Rock N Roll ! Make 400 to 500 , so everybody can enjoy one.
- Tsar Bomba
- Posts: 3622
- Joined: Fri Jan 30, 2015 5:14 am
- Contact:
Re: What Knife Would You Like GEC To Make ?
If GEC made a gunboat canittler I can promise you I'd go broke on it.Modern Slip Joints wrote:Three back springs for all full length blades or a whittler assembly? I'd buy at least one either way.Onearmbladejunkie wrote:I want a Great Eastern Cutlery 4 1/4" Gun-boat Canoe with a clip ,a spear , and a wharncliffe blade !
Don't feel bad. Queen was a major cutler and they shipped a run of #01 SFOs with the label "sway back" on what is clearly a trapper (or, being generous, a swaybelly jack). Nobody could call the Daniels family or the employees of Queen "knife stupid" with a straight face.Onearmbladejunkie wrote:I was not sure . I am learning ! Thank you so very much. I need correction in my life. I hate being knife stupid ! Thank you sir !!!kootenay joe wrote:The S&M you show is a Curved Jack not a Swayback in which handle curves the other way, concave spine.
Tony
Everything's better with a Barlow
Everything's better with a Barlow
Re: What Knife Would You Like GEC To Make ?
any automatic. the single blade 73's that GEC mad for Taylor are soooooooo hard to find
-
- Posts: 805
- Joined: Mon Jun 04, 2018 7:23 pm
- Contact:
Re: What Knife Would You Like GEC To Make ?
I love Grand Daddy Barlows . I bought a few nice NOS and slightly use Schatt & Morgan Grand Daddy Barlow knives in the past. In the last year prices have exploded. The Market is right for a GEC#97 4 3/4" Grand Daddy Barlow knife.kootenay joe wrote:The Daddy Barlow is a rather dull pattern. I can't see the attraction. Maybe you is jokin' ? There are still nice unused Imperial Daddy Barlows from 1960's to fulfill your desire for Daddy B.
kj
-
- Posts: 805
- Joined: Mon Jun 04, 2018 7:23 pm
- Contact:
Re: What Knife Would You Like GEC To Make ?
Great Eastern Cutlery is famous for teasing buyers on their web-sight. GEC has a new button design . Looks like GEC might be doing a possible French Kate run this year.
-
- Posts: 805
- Joined: Mon Jun 04, 2018 7:23 pm
- Contact:
Re: What Knife Would You Like GEC To Make ?
Looks like Collectorknives.net will be ordering some more GEC#77 Barlow knives !
-
- Posts: 805
- Joined: Mon Jun 04, 2018 7:23 pm
- Contact:
-
- Posts: 18
- Joined: Thu Jun 27, 2019 6:23 pm
Re: What Knife Would You Like GEC To Make ?
72 spear. My grail knife.
-
- Posts: 805
- Joined: Mon Jun 04, 2018 7:23 pm
- Contact:
Re: What Knife Would You Like GEC To Make ?
(#22 magnum - single blade) (#23 Bull lock -Trapper liner lock) (#25 easy open little jack) (#42 Missouri Trader Lock back) (#43 Oregon Trader LB) (#44 Buffalo single blade) (#47 Viper) (#55 Hounds tooth) (#56 Bird dog - weaver Jack OE) (#63 Fishtail) (#64 Babylon Hill Special LB SG) (#65 Ben Hogan 1865 LB) (#72 mini lock-back hunter) (#73 Scout LL) (#74 Cotton sampler) (#77 Barlow - single blade) (#78 American Jack single blade) (#83 Tascosa lock-back) (#85 Bullet End Jack EO) ( #86 single blade( (#92 Talon) (#97 Allegheny LB SG) (#99 Wall Street LB)
- Log Cabin Knives
- Posts: 69
- Joined: Mon Apr 22, 2019 1:07 am
Re: What Knife Would You Like GEC To Make ?
I was just thinking about this subject and I'd like to see GEC make a Clasp knife. I know they would make a great one and I'm sure it would be a big hit with fans. I know I would buy one. Would anybody else? Rich
-
- Posts: 805
- Joined: Mon Jun 04, 2018 7:23 pm
- Contact:
Re: What Knife Would You Like GEC To Make ?
Early next year I want to see another #93 Rams Foot knife run. The #93 Rams Foot will make the best club and forum knives. I want to see a #93 in barky rams horn too.
-
- Posts: 13373
- Joined: Mon Jan 11, 2016 5:36 pm
- Location: West Kootenays, B.C.
Re: What Knife Would You Like GEC To Make ?
Hi Log, what do you mean by "Clasp knife" ? like a Case Sod Buster ? or ?? Post a picture that might be similar to what you are thing of.
kj
kj
- jerryd6818
- Gold Tier
- Posts: 39174
- Joined: Sun Jan 04, 2009 5:23 am
- Location: The middle of the top of a bastion of Liberalism.
Re: What Knife Would You Like GEC To Make ?
What the heck does a 976 look like. I've searched the web site with no results.Onearmbladejunkie wrote:Looks like AAPK is pulling a sneak on us. I hope they offer this knife after the 3rd. They always wait till the last of the year. Smooth Oily Creek bone would of been a cooler choice. 26A-513x1024.jpg
And I finally came up with a wish knife. I won't get any support on this but I'd like to see them make a Coffin Jack like the Winchester 2921 with fancy bolsters.
- Attachments
-
- All Three.jpg (53.66 KiB) Viewed 5208 times
Forged on the anvil of discipline.
The Few. The Proud.
Jerry D.
This country has become more about sub-groups than about it's unity as a nation.
"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
The Few. The Proud.
Jerry D.
This country has become more about sub-groups than about it's unity as a nation.
"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
- Log Cabin Knives
- Posts: 69
- Joined: Mon Apr 22, 2019 1:07 am
Re: What Knife Would You Like GEC To Make ?
Hey KJ, I guess my idea of a Clasp knife would be the same frame as Case's Bulldog/Buffalo Knives. About 5 1/2" closed and almost 10" open. For scaling purposes attached is a pix of a Case Bulldog next to a GEC Missouri. (sorry about the pix, in dog years my camera is older than me!):: .....p.s. I like Jerry's idea of a Coffin design too!
Re: What Knife Would You Like GEC To Make ?
Onearmbladejunkie wrote:Early next year I want to see another #93 Rams Foot knife run. The #93 Rams Foot will make the best club and forum knives. I want to see a #93 in barky rams horn too.