Page 1 of 1

Wards Knife Blade

Posted: Mon Apr 16, 2018 3:14 pm
by patch1
Just picked up this Wards Made in USA aluminum scaled 4 blade camp type knife.
I'm not sure what the small curved blades function is.
The finger notch makes me think it could be a small skinning blade.
Any thoughts?

Patch1

Re: Wards Knife Blade

Posted: Mon Apr 16, 2018 3:16 pm
by Steve Warden
I believe it is a can opener, but I've been wrong before.
Not sure how it's supposed to operate.

Re: Wards Knife Blade

Posted: Mon Apr 16, 2018 3:42 pm
by MT-Vessel
Fifth picture down on page 1
viewtopic.php?f=2&t=56338&hilit=Can+opener

Re: Wards Knife Blade

Posted: Mon Apr 16, 2018 4:50 pm
by XX Case XX
Steve Warden wrote:Not sure how it's supposed to operate.
I've always wondered about that myself...

_________
Mike

Re: Wards Knife Blade

Posted: Mon Apr 16, 2018 5:07 pm
by Steve Warden
XX Case XX wrote:
Steve Warden wrote:Not sure how it's supposed to operate.
I've always wondered about that myself...

_________
Mike
Now put a P38 in my hands... :wink:

I used to always carry one. Had occasion to open a few cans, but I found I used the flat tip as a screw driver many times.
Stopped carrying it after the umpteenth time of jamming the point under my finger nails as I was reaching for my keys (kept the P38 on my key ring).

Re: Wards Knife Blade

Posted: Mon Apr 16, 2018 5:34 pm
by OLDE CUTLER
MT-Vessel wrote:Fifth picture down on page 1
viewtopic.php?f=2&t=56338&hilit=Can+opener
And just below that in the next post, I demonstrated the use of the common types of can openers found on pocket knives.