A tutorial on the Camillus Knife Vise

This forum is for posting step by step techniques used in the art of making, customizing, and repairing knives. Please stop by and teach a few things or maybe learn something new from the talented members of AAPK.
Jerlin
Posts: 81
Joined: Fri May 22, 2020 3:22 pm
Location: Euless, TX

Re: A tutorial on the Camillus Knife Vise

Post by Jerlin »

Hi Dale, thank you for the reply and your gracious comments. Also thank you for your tips on making a Camillus knife vice. I have two Camillus knives that I am working on. I'm replacing the scales on both knives and a couple of blades on one of them. It is my understanding from your other tutorials, and advice from some of the members, that it is best to take the knives completely apart to replace the scales. Therefore, having a Camillus knife vise for compressing the springs to put the rocker pins in would come in handy. I'm sorry to hear about your rheumatoid arthritis and hope it gets better soon. I also hope you are able to travel this summer. We all need some relief from the restrictions we have been under.

Best regards,

Jerry Johnson
User avatar
Doc B
Posts: 3700
Joined: Fri Aug 10, 2018 10:57 pm
Location: San Antonio

Re: A tutorial on the Camillus Knife Vise

Post by Doc B »

I got one of these, from Dale, in the past. His modification of replacing duct tape, with the micarta insert, is genius! Sometimes tapping the pin in, still creates enough downward force, on the knife...that I could see it easily knocking your knife out of the vise and damaging the scales, if you only used duct tape. Dale's modification creates a ledge, to keep the knife from being displaced downward. Note how in the middle of the ledge, it also has a semicircular cutout, to allow the pin to come through the knife, without hitting the micarta ledge. Micarta is a good choice...it is strong; yet grippy and flexible enough to protect your knife. The micarta insert is pinned on to the "Camillus" vice.
Heretical Refurb / Mods of cheap old folders, since late 2018
User avatar
orvet
Gold Tier
Gold Tier
Posts: 19336
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Re: A tutorial on the Camillus Knife Vise

Post by orvet »

Thank you Doc.
When all things work perfectly there should not be much downward pressure at all on the Micarta ledge or on the piece of tape which covers the original Camillus Knife Vice
That said, I have one on which I'm broke one of the pieces of micarta off. ::facepalm::
Dale
AAPK Administrator

Please visit my AAPK store: www.allaboutpocketknives.com/orvet

Job 13:15

"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
User avatar
Doc B
Posts: 3700
Joined: Fri Aug 10, 2018 10:57 pm
Location: San Antonio

Re: A tutorial on the Camillus Knife Vise

Post by Doc B »

orvet wrote: Sun Aug 16, 2020 9:15 pm Thank you Doc.
When all things work perfectly there should not be much downward pressure at all on the Micarta ledge or on the piece of tape which covers the original Camillus Knife Vice
That said, I have one on which I'm broke one of the pieces of micarta off. ::facepalm::
In my not-so-perfect world...I'll take the "ledge" :lol:
Heretical Refurb / Mods of cheap old folders, since late 2018
User avatar
Rdubya21
Posts: 416
Joined: Sat Sep 04, 2021 8:41 am
Location: Ohio

Re: A tutorial on the Camillus Knife Vise

Post by Rdubya21 »

I’m working on an old Camillus BSA knife . Someone put the blade to the grinder and needless to say they were not very good at it .
5EDE5D70-59A3-4100-B6B2-CE795431C802.jpeg
Anyway , I saw this thread and thought I’d make this vise . Man , it’s the cats meow ! When I stuck the knife in to test it , the spring pin fell out onto the floor . Thankyou Dale , and I apologize for asking you a dumb question before I found this thread .
FFD4823D-F618-4370-BDB2-A48017506D71.jpeg
F5B3AC3A-4EAB-446F-9EC0-9B6F2D779889.jpeg
User avatar
orvet
Gold Tier
Gold Tier
Posts: 19336
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Re: A tutorial on the Camillus Knife Vise

Post by orvet »

No apologies necessary!
By the way, that's a very good-looking Camillus Knife vice! ::tu:: ::tu::
Dale
AAPK Administrator

Please visit my AAPK store: www.allaboutpocketknives.com/orvet

Job 13:15

"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
User avatar
Nev52
Posts: 1099
Joined: Thu Sep 14, 2017 12:37 am
Location: Pennsylvania

Re: A tutorial on the Camillus Knife Vise

Post by Nev52 »

Dale,
I just tried to make a knife vise like the one you have shown here. I did not have any dimensions to go off, so I tried to use the photos in this thread. I have not used it yet. I think it might be too long. ::dang:: I have noticed some are shorter and just a u bend in the steel. I used 1'' wide 1/8'' flat steel and length is 8''.
Thank you for posting this tool. I have been using my bench vise with wood blocks over the jaws. This looks like it will be an improvement. Do you mind giving out the dimensions of you vise?

Thank you
Nev
knive vise.jpg
User avatar
orvet
Gold Tier
Gold Tier
Posts: 19336
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Re: A tutorial on the Camillus Knife Vise

Post by orvet »

Sorry Nev,
I missed your post as I have not been on line much lately... Lots going on!

Your dimensions look spot on. Nice job! ::tu::

I think it was 17" length between the bends at each end.
I will check it and get back to you.
Dale
AAPK Administrator

Please visit my AAPK store: www.allaboutpocketknives.com/orvet

Job 13:15

"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
User avatar
Nev52
Posts: 1099
Joined: Thu Sep 14, 2017 12:37 am
Location: Pennsylvania

Re: A tutorial on the Camillus Knife Vise

Post by Nev52 »

Thanks Dale,
Thanks for sharing this tool. It has helped me a lot on my knife reassembly. I tried my best to make an exact copy of yours. If you have a lot going on, please don't worry about the dimension's mine works I just wanted to have it like the original. Thank you for your response and sharing this tool. ::handshake::

Nev
CarMan
Posts: 358
Joined: Mon May 23, 2022 6:41 pm

Re: A tutorial on the Camillus Knife Vise

Post by CarMan »

orvet wrote: Fri Sep 26, 2008 9:27 am This is a tutorial on the use of a Camillus style "knife vise" as they were called. The function of this tool is to compress the backsprings of a slipjoint to make it easy to insert a new rocker pin when repairing a knife.

BACKGROUND INFORMATION

Most of you who are regulars here in AAPK know Tom Williams (CAMCO). Tom has shared a great deal of information about Camillus Cutlery with me, a fact for which I am forever grateful. Recently Tom introduced me to one of his fellow Camillus employees, Wallace Rockwell. Wallace sent me a cutler's stiddy made and used at the Camillus factory. He also sent me a "knife vise." It was also made and used in the Camillus factory.

The knife vise makes it easy work of replacing the rocker pin in a knife.

Tom told me that at Camillus each knife vise was covered with white tape. The purpose of the white tape is to prevent the metal from scratching the knife. The one I received came sans the white tape. Not having any white tape, I had to use duct tape to cover the surface where it might contact the knife.

The first time I used this tool, I thought I had done something wrong because it pivot pin went in so easy. It took me about 15 seconds to put the pivot pin in place. It sure beats trying to compress the springs by hand, or with a soft face vise or with soft face pliers.

Although, I used the vise on several knives before I knew about the white tape, I did not have any problems with it damaging the knife. I think this might only be critical with certain handle materials such as mother-of-pearl.

Here are some pictures of the knife vise that came from Camillus and one that I made like it. I am posting pictures of the knife vise I made in use.

You place the knife vise in a larger bench vise, set the knife on the rests, and crank the bench vise in until the backsprings are compressed, then slip the pen into place. This may require a few light taps from a hammer, but often the pin can be pushed in with your fingers, depending on the knife.

I have made several copies of the Camillus knife vise. It is such a handy gadget and such a timesaver that I figured other knife tinker-ers might want one also. I spoke to Tom about selling these in my AAPK store and donating part of the proceeds to the Camillus Historical Society. Tom said the Society really did not need donations and suggested that the donation might be better used at AAPK.

I will speak with Bryan, and if he is agreeable, five dollars of the price of each knife vise I sell will be donated to AAPK. If you are interested in one of these unique and very useful tools, you can contact me. I hope to have them up on my store in the next day or two.

I hope this tutorial is helpful.
If you have any questions please feel free to ask.

Dale
I know this is a very old post but just now hoping to start knife repair for myself. If you don’t mind would you please explain what spinning a head on a pin is? Thank you for any help.
User avatar
orvet
Gold Tier
Gold Tier
Posts: 19336
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Re: A tutorial on the Camillus Knife Vise

Post by orvet »

Here is a good topic that explains it pretty well.
That was 15 years ago, and I still don't know how to make and post a video! ::facepalm::

I hope this helps.
Dale
AAPK Administrator

Please visit my AAPK store: www.allaboutpocketknives.com/orvet

Job 13:15

"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
CarMan
Posts: 358
Joined: Mon May 23, 2022 6:41 pm

Re: A tutorial on the Camillus Knife Vise

Post by CarMan »

orvet wrote: Fri Aug 11, 2023 5:10 am Here is a good topic that explains it pretty well.
That was 15 years ago, and I still don't know how to make and post a video! ::facepalm::

I hope this helps.
Appreciate the help, thank you.
Post Reply

Return to “Knife Related Tutorials”