ima wearing ruler suspenders
ima wearing ruler suspenders
Any them cutlers out there
know the way
to re-bend or straighten this blade..
un carried knife where ya gotta
push the clip blade INWARD to get it to
fall off into the well
plse advise . . . thanks in advance
and
HET in advance
know the way
to re-bend or straighten this blade..
un carried knife where ya gotta
push the clip blade INWARD to get it to
fall off into the well
plse advise . . . thanks in advance
and
HET in advance
- treefarmer
- Gold Tier
- Posts: 12849
- Joined: Sun Oct 04, 2009 6:53 am
- Location: Florida Panhandle(LA-Lower Alabama)
Re: ima wearing ruler suspenders
don't have any cutler advice but just lookin' at the 2nd picture, should the clip blade have been installed on the other side of the brass scale on that end of the knife? It would sure take quite a krink to line it up as it is.
Treefarmer
Treefarmer
A GUN IN THE HAND IS BETTER THAN A COP ON THE PHONE.
Re: ima wearing ruler suspenders
Since it's guaranteed why not send it back for repair?
BTW can I borrow those suspenders ?
BTW can I borrow those suspenders ?
Phil
AAPK Administrator
Jesus died for you. Are you living for Him?
"Buy More Ammo!"
Johnnie Fain 1949-2009
AAPK Administrator
Jesus died for you. Are you living for Him?
"Buy More Ammo!"
Johnnie Fain 1949-2009
- gsmith7158
- Gold Tier
- Posts: 8548
- Joined: Fri Dec 25, 2015 7:25 pm
- Location: Canton, Ga. 100% of the time
- Contact:
Re: ima wearing ruler suspenders
Yeah looks like the bit at the end of the master should be on the other side.treefarmer wrote:don't have any cutler advice but just lookin' at the 2nd picture, should the clip blade have been installed on the other side of the brass scale on that end of the knife? It would sure take quite a krink to line it up as it is.
Treefarmer
------------------
Greg
IF YOU AIN'T BUYING OR LOOKING AT A KNIFE THEN YOU AIN'T LIVING.
Always looking to buy good quality Empire knives.
PROUD MEMBER AAPK, NRA.
Greg
IF YOU AIN'T BUYING OR LOOKING AT A KNIFE THEN YOU AIN'T LIVING.
Always looking to buy good quality Empire knives.
PROUD MEMBER AAPK, NRA.
- XX Case XX
- Posts: 3574
- Joined: Sat Oct 31, 2015 7:24 pm
- Location: California
Re: ima wearing ruler suspenders
I bet Dale can fix it...
_________
Mike
_________
Mike
"If there are no Dogs in Heaven, then when I die, I want to go where they went". Will Rogers
I work hard so my Dog can have a better life...
I work hard so my Dog can have a better life...
Re: ima wearing ruler suspenders
You guys are right, the only weird thing is from what I can see into the knife it looks like a cut center rather than catch bits. Of course I could be wrong with these eyes lol! Dave on the back of the knife does it look like there are two liners alongside each other? If not the spring should be about double the width of the blade tang with a small brass bit alongside the blade taking up the extra space.
Eric
PS, now that I look at it again i think it's catch bits but still not positive.
Eric
PS, now that I look at it again i think it's catch bits but still not positive.
Re: ima wearing ruler suspenders
I think a pic looking straight into the pocket with the blades open would help. But I would think that it would have to be taken apart and put back together correctly. If its still under warranty like Phil said, send it back
Re: ima wearing ruler suspenders
I think that it is a single spring knife with both blades riding on the same spring. I think the brass pieces are the ends of a cut scale, probably put in place to make the blade well a little wider in order to be able to fit both blades in??
Dan
Or, it could be a single wide backspring and then those would be catch bits??, in which case it would be assembled wrong. If it is a wide spring with catch bits, why wouldn't the master blade been made as wide as the back spring, with only a catch bit at the small blade end?
Dan
Or, it could be a single wide backspring and then those would be catch bits??, in which case it would be assembled wrong. If it is a wide spring with catch bits, why wouldn't the master blade been made as wide as the back spring, with only a catch bit at the small blade end?
Dan
- muskrat man
- Gold Tier
- Posts: 5667
- Joined: Fri Jun 30, 2006 4:04 am
- Location: Ohio
- Contact:
Re: ima wearing ruler suspenders
It at first glance looks like the spacer liner was installed on the wrong side of the knife. Were it on the other side the pen blade could easily snuggle in the extra space and the clip wouldn't need any krinking at all. However I believe they were made that way and had a drastic krink right at the plunge line on the cip blade, they got a little carried away with this one it looks like.
Custom knives, repair, restoration & embellishment
Certified Hubertus, Taylor, & Schrade repairman past and present
http://www.muskratmanknives.com
https://www.facebook.com/Muskratmanknives
Certified Hubertus, Taylor, & Schrade repairman past and present
http://www.muskratmanknives.com
https://www.facebook.com/Muskratmanknives
Re: ima wearing ruler suspenders
Heres ma OTHER TWO 708s. ... seems they have
same brass part location.. BUT these blades fall
correctly down into the well without a push . .
tambien a pic underneath for brass liner compare . .
HET now HET !!!
same brass part location.. BUT these blades fall
correctly down into the well without a push . .
tambien a pic underneath for brass liner compare . .
HET now HET !!!
Re: ima wearing ruler suspenders
That knife looks either previously used and the main blade was bent somehow, or it's a new knife that should not have made it through QC.
-
- Posts: 13373
- Joined: Mon Jan 11, 2016 5:36 pm
- Location: West Kootenays, B.C.
Re: ima wearing ruler suspenders
What would happen with knives culled by Schrade-Walden QC ? Were then permenantly disposed of ? Or were they stored somewhere for possible future repair during slow times ?
If the latter then possibly this knife was culled & stored and then scooped up and put in with other knives being auctioned in lots after 2004 closure ?
kj
If the latter then possibly this knife was culled & stored and then scooped up and put in with other knives being auctioned in lots after 2004 closure ?
kj
Re: ima wearing ruler suspenders
RO . .. . im doubtful that a "Fac 2nd" would end up in the tube, avail to ship with top line stuff
. . only to be bought as scrap when that guy BROKE Schrade and shipped em off to China.
HET
. . only to be bought as scrap when that guy BROKE Schrade and shipped em off to China.
HET
Re: ima wearing ruler suspenders
Anyone could have put a bad knife in a tube and sold it as new, I suppose.
- Tsar Bomba
- Posts: 3622
- Joined: Fri Jan 30, 2015 5:14 am
- Contact:
Re: ima wearing ruler suspenders
Wasn't Schrade fairly good about grinding stamps off tangs and keeping their seconds well-segregated from their top line stuff?
Some of the "seconds" I've got are tight, clean and sound like any Schrade I've ever had, I can't find the defects on most, but they carry just as well as the full-priced ones.
Blister, you gotta loosen up them suspenders and let a couple them Waldens roam free lookin for some new homes!
Some of the "seconds" I've got are tight, clean and sound like any Schrade I've ever had, I can't find the defects on most, but they carry just as well as the full-priced ones.
Blister, you gotta loosen up them suspenders and let a couple them Waldens roam free lookin for some new homes!
Tony
Everything's better with a Barlow
Everything's better with a Barlow
Re: ima wearing ruler suspenders
Tsarbomba
Het yawlll HET !!!!
TONY TONY TONY < -- said with a Joe E Ross accent . . . might sell one them 708'sBlister, you gotta loosen up them suspenders and let a couple them Waldens roam free lookin for some new homes!
Het yawlll HET !!!!