Terrier Cutlery Company

This forum is dedicated to the discussion and display of old knives. The rich history of all the many companies that made them through the early years will be found here as well as many fine examples of the cutlers art. Share pictures of your old knives and your knowledge here!
User avatar
RobesonsRme.com
Posts: 9887
Joined: Wed Jan 28, 2009 3:44 pm
Location: The Heart of Dixie.
Contact:

Re: Terrier Cutlery Company

Post by RobesonsRme.com »

That is a Robeson. I have seen it with three different company’s advertising.

I have seen it with bone handles, but by far, most often with ivoroid advertising handles.

Don’t think I’ve ever seen a Terrier in that pattern.

Have seen earlier versions with a Presto-Lite key in the end of the wire-scaper/screw-driver blade. Frankly, surprised your Terrier doesn’t have one.

Some refer to these as “ Automobilist’s Knives”, though Robeson did make a four blade automobilist’s knife with a different blade configuration.
DE OPPRESSO LIBER

"...Men may spurn our appeals, reject our message, oppose our arguments, despise our persons ___but they are helpless against our prayers. "

Sidlow Baxter
Unclemrbig
Posts: 15
Joined: Thu Nov 26, 2020 11:50 pm

Re: Terrier Cutlery Company

Post by Unclemrbig »

I have a nice 5 inch EO 92 622. Here are a few pics. What sort of value does it have?
Attachments
5907A62D-38BA-4A8B-A890-7EB3C46615A2.jpeg
B332B50C-3061-4326-B69D-3935B5CDCF1F.jpeg
62CA1C08-6696-4171-9906-5499571FA6F5.jpeg
User avatar
FRJ
Posts: 15182
Joined: Fri May 14, 2010 1:43 pm
Location: Ct.

Re: Terrier Cutlery Company

Post by FRJ »

Nice looking, big knife, Unclemrbig.
I'm curios about the worn handles and the blades not so much.
Joe
Unclemrbig
Posts: 15
Joined: Thu Nov 26, 2020 11:50 pm

Re: Terrier Cutlery Company

Post by Unclemrbig »

Haven’t a clue!
User avatar
edge213
Gold Tier
Gold Tier
Posts: 7764
Joined: Sat Jan 25, 2014 12:48 am
Location: The Crossroads of America

Re: Terrier Cutlery Company

Post by edge213 »

Looks like a really cool old knife that has been highly buffed to me.
David
"Glowing like the metal on the edge of a knife" Meat Loaf
User avatar
RobesonsRme.com
Posts: 9887
Joined: Wed Jan 28, 2009 3:44 pm
Location: The Heart of Dixie.
Contact:

Re: Terrier Cutlery Company

Post by RobesonsRme.com »

A well used and carried Terrier 092 giant EZ Opener that has been heavily cleaned.

Robeson made the pattern as a Robeson and as a Terrier.

I have a Terrier with the same pattern number, but with different blades.

I am not an appraiser and usually decline to put values on knives belonging to others. I do not follow the market or trends.

It’s not worth what it could have been. The cleaning hurts it.

Charlie
DE OPPRESSO LIBER

"...Men may spurn our appeals, reject our message, oppose our arguments, despise our persons ___but they are helpless against our prayers. "

Sidlow Baxter
Jacknifeben
Posts: 1560
Joined: Wed Mar 03, 2010 9:06 pm

Re: Terrier Cutlery Company

Post by Jacknifeben »

Here is a very old Jack Knife Ben with a Robeson/ Terrier punch blade. Old Ben only contracted knives from the best.
Attachments
63761441-32DE-408E-8880-9B12E7C8E8DF.jpeg
6DD37B76-60E4-48CD-ACCE-E32E14150E4C.jpeg
Unclemrbig
Posts: 15
Joined: Thu Nov 26, 2020 11:50 pm

Re: Terrier Cutlery Company

Post by Unclemrbig »

RobesonsRme.com wrote: Sun Jul 04, 2021 1:09 am A well used and carried Terrier 092 giant EZ Opener that has been heavily cleaned.

Robeson made the pattern as a Robeson and as a Terrier.

I have a Terrier with the same pattern number, but with different blades.

I am not an appraiser and usually decline to put values on knives belonging to others. I do not follow the market or trends.

It’s not worth what it could have been. The cleaning hurts it.

Charlie
Thanks for the info!
Unclemrbig
Posts: 15
Joined: Thu Nov 26, 2020 11:50 pm

Re: Terrier Cutlery Company

Post by Unclemrbig »

RobesonsRme.com wrote: Sun Jan 26, 2020 7:46 pm I was sitting in a parking lot last week while my wife was seeing one of her doctors and thought I’d check my e-mail on my cell phone.

I had a message from Lloyd Duff alerting me to a nice looking Terrier on EBay.

I looked at it, found it desirable and tried to buy it via the Buy-It-Now option, but could not as I was not logged into EBay on the phone and had no idea what my password might be. I know. Go figure.

Three hours later, when I finally got to my PC, the knife was still listed and I bought it, hoping it was as nice as it appeared.

This is what I received.

It is a 3 1/4” pearl handled Terrier Congress Whittler with a sheep foot master and two pens. The blades are close to mint with crocus polish on the front and glaze finish on the back. They all have half-stops and audible snaps opening, closing and at the half-stops.

Master is stamped TERRIER / CUTLERY / ROCHESTER, N.Y. And the pens are both marked TERRIER / CUTLERY. There is a dog’s head on the back of the master and and the pattern number 21 / 732 in two lines on one of the pens. That equates to a Robeson six digit number of 732021, which would be an early shape pattern at 021.

There is a little scratch on the front handle, otherwise they are in great condition.

Interestingly, after I received the knife, the seller listed another just like it, but not as nice. I looked at his list of auctions and he has five Congress Whittlers on EBay, all of different manufacturers. I found that very interesting.
I have the same knife bit not nearly as nice!
Attachments
6006588F-E29A-4A05-8B9D-D9811799F178.jpeg
6BF94111-F62C-474E-813B-D9DF793C8189.jpeg
8C36A70F-1689-4CC2-B79E-AAD9F8AC5BC0.jpeg
66E256FB-37CE-4B12-A2F9-69D54561485A.jpeg
CA4EE501-5843-4596-942B-7CD23862E1E1.jpeg
Unclemrbig
Posts: 15
Joined: Thu Nov 26, 2020 11:50 pm

Re: Terrier Cutlery Company

Post by Unclemrbig »

Another Terrier-3 blade 69 632.
Attachments
9C4DBA8C-FB9B-4D7C-A022-F5C0ED152765.jpeg
20DE7981-9BD3-473A-B6C0-9D3448C47263.jpeg
0BA72896-0559-4EE7-919C-913228547673.jpeg
670720CA-FAA6-49E3-AD65-EF37FE223A3E.jpeg
User avatar
RobesonsRme.com
Posts: 9887
Joined: Wed Jan 28, 2009 3:44 pm
Location: The Heart of Dixie.
Contact:

Re: Terrier Cutlery Company

Post by RobesonsRme.com »

Scarce pattern, that one.
DE OPPRESSO LIBER

"...Men may spurn our appeals, reject our message, oppose our arguments, despise our persons ___but they are helpless against our prayers. "

Sidlow Baxter
Unclemrbig
Posts: 15
Joined: Thu Nov 26, 2020 11:50 pm

Re: Terrier Cutlery Company

Post by Unclemrbig »

One more 3 1/4” Terrier. Don’t know much more than that.
Attachments
F021FF21-E26D-401F-B0EE-B0E92C2A0F28.jpeg
3DA54146-C6E5-40A7-9B14-E23AC7A6694D.jpeg
User avatar
FRJ
Posts: 15182
Joined: Fri May 14, 2010 1:43 pm
Location: Ct.

Re: Terrier Cutlery Company

Post by FRJ »

Nice little pen knife you have there.
Joe
User avatar
RobesonsRme.com
Posts: 9887
Joined: Wed Jan 28, 2009 3:44 pm
Location: The Heart of Dixie.
Contact:

Re: Terrier Cutlery Company

Post by RobesonsRme.com »

Very nice, indeed.

Charlie
DE OPPRESSO LIBER

"...Men may spurn our appeals, reject our message, oppose our arguments, despise our persons ___but they are helpless against our prayers. "

Sidlow Baxter
Unclemrbig
Posts: 15
Joined: Thu Nov 26, 2020 11:50 pm

Re: Terrier Cutlery Company

Post by Unclemrbig »

Just picked up another one. I haven’t seen this type handle with a clip blade.
Attachments
2C2C7ECE-2627-460B-90EC-331ADD539846.jpeg
61F41D10-7F1C-4553-9A77-7C7486069A12.jpeg
D6BAA05C-D87E-4F6B-B7BD-9A6E7E8C4120.jpeg
User avatar
RobesonsRme.com
Posts: 9887
Joined: Wed Jan 28, 2009 3:44 pm
Location: The Heart of Dixie.
Contact:

Re: Terrier Cutlery Company

Post by RobesonsRme.com »

It’s a Barlow.

Hard to tell what the blade was originally.

Nice.

You just keep finding them.

Charlie
DE OPPRESSO LIBER

"...Men may spurn our appeals, reject our message, oppose our arguments, despise our persons ___but they are helpless against our prayers. "

Sidlow Baxter
User avatar
RobesonsRme.com
Posts: 9887
Joined: Wed Jan 28, 2009 3:44 pm
Location: The Heart of Dixie.
Contact:

Re: Terrier Cutlery Company

Post by RobesonsRme.com »

Some weeks back, I received a private message from Mike Losicco, asking if I would be interested in buying a Terrier he had for sale.

It was a nice knife, but I told him due to recent unexpected medical expenses re’ Sarah, I was not in a position to purchase any knives.

He expressed his understanding and best wishes for Sarah and that was that.

Or so I thought.

A week or so later, this arrived in the mail.

It was from Mike.

It is a cocobolo handled hawkbill knife with bail.

Great snap, opening and closing.

Some patina and spotting on the blade, but it dates 1910 to 1916, so that’s expected.

Interestingly, the dog’s head logo is on the front of the tang and the mark on the back.

This is the only knife I have with this mark, but others here have examples of same.

A great knife and a wonderful and generous gesture from Mike Losicco.
Attachments
82D6E117-A9D7-472E-863F-1954C3441783.jpeg
EF88D8F9-F7E8-4C61-A2CA-5BEB220DAEB6.jpeg
A7ED603F-479B-4BE3-8300-D098EBF8D74B.jpeg
60DA380C-8EFF-4D79-9182-68D1C2CD37EF.jpeg
1ADB9CCC-B48C-48A1-8218-1E61D9B1E155.jpeg
92A76BD7-2AA8-4498-842B-8FFD0EADBA24.jpeg
DE OPPRESSO LIBER

"...Men may spurn our appeals, reject our message, oppose our arguments, despise our persons ___but they are helpless against our prayers. "

Sidlow Baxter
doglegg
Gold Tier
Gold Tier
Posts: 17731
Joined: Mon Sep 18, 2017 2:35 am
Location: Grand Prairie, Texas

Re: Terrier Cutlery Company

Post by doglegg »

Kudos to Mike and congrats to ypu.
User avatar
edge213
Gold Tier
Gold Tier
Posts: 7764
Joined: Sat Jan 25, 2014 12:48 am
Location: The Crossroads of America

Re: Terrier Cutlery Company

Post by edge213 »

RobesonsRme.com wrote: Mon Feb 14, 2022 5:31 pm Some weeks back, I received a private message from Mike Losicco, asking if I would be interested in buying a Terrier he had for sale.

It was a nice knife, but I told him due to recent unexpected medical expenses re’ Sarah, I was not in a position to purchase any knives.

He expressed his understanding and best wishes for Sarah and that was that.

Or so I thought.

A week or so later, this arrived in the mail.

It was from Mike.

It is a cocobolo handled hawkbill knife with bail.

Great snap, opening and closing.

Some patina and spotting on the blade, but it dates 1910 to 1916, so that’s expected.

Interestingly, the dog’s head logo is on the front of the tang and the mark on the back.

This is the only knife I have with this mark, but others here have examples of same.

A great knife and a wonderful and generous gesture from Mike Losicco.
Good on Mike ::tu::
Congratulations to you Charlie.
That sure is a great stamp.
David
"Glowing like the metal on the edge of a knife" Meat Loaf
User avatar
RobesonsRme.com
Posts: 9887
Joined: Wed Jan 28, 2009 3:44 pm
Location: The Heart of Dixie.
Contact:

Re: Terrier Cutlery Company

Post by RobesonsRme.com »

Yes, it is and I’m not exactly sure what it means.

Robeson had showrooms in New York City at one time, Fifth Avenue, I believe.

Not sure if that’s what the stamp refers to or was there an office or showroom for Terrier Cutlery Company, as well?

Not sure we’ll ever know the answer.
DE OPPRESSO LIBER

"...Men may spurn our appeals, reject our message, oppose our arguments, despise our persons ___but they are helpless against our prayers. "

Sidlow Baxter
User avatar
peanut740
Gold Tier
Gold Tier
Posts: 7575
Joined: Fri Jan 23, 2009 2:32 pm
Location: Ohio, along the river
Contact:

Re: Terrier Cutlery Company

Post by peanut740 »

Mike and Charlie ::tu:: ::tu::
Roger
User avatar
philco
Gold Tier
Gold Tier
Posts: 14949
Joined: Sat Mar 22, 2008 9:32 pm
Location: Kentucky (Wildcat Country)

Re: Terrier Cutlery Company

Post by philco »

Congratulations Charlie and well played Mike. A very nice thing to do.

Charlie, I hope Sarah is doing ok now.
Phil
AAPK Administrator

Jesus died for you. Are you living for Him?

"Buy More Ammo!"
Johnnie Fain 1949-2009
Duffer
Posts: 1020
Joined: Sat Sep 19, 2015 9:33 pm
Location: Las Vegas, NV

Re: Terrier Cutlery Company

Post by Duffer »

Two great guys and the knife ain’t bad either ::nod:: !!
Lloyd
User avatar
FRJ
Posts: 15182
Joined: Fri May 14, 2010 1:43 pm
Location: Ct.

Re: Terrier Cutlery Company

Post by FRJ »

This is pretty cool all the way around. ::tu:: ::tu::
Nice hawkbill.
Joe
Duffer
Posts: 1020
Joined: Sat Sep 19, 2015 9:33 pm
Location: Las Vegas, NV

Re: Terrier Cutlery Company

Post by Duffer »

Here is a Terrier cattle knife I recently acquired. Not in great cosmetic condition but these are hard to find let alone in high grade or pristine condition like many Charlie has. This one is pattern No. 235632 or Robeson pattern No. 632235. It has the Terrier Bull head stamp on the pile side spear blade tang. I measure it to be 3 & 5/8 inches closed. The handles are some kind of plastic composite. There is a split in the pile side handle at the bottom from the front bolster running about 3/4 of an inch but both handles are firmly attached with no warping. There is some blade and punch loss. Overall I am happy with it and being 106 to 112 years old this is a great antique very scarce folder from a premier maker ::nod::
Attachments
2639F18A-D759-4FE9-B6A5-7E1983F7448A.jpeg
1393C942-E5EB-4A53-AFB5-B2D2F3182571.jpeg
3002A941-2317-48CF-B418-D744B911412A.jpeg
1994C66F-8CAE-4E34-BBB3-EF26765CF50B.jpeg
7FE0D7F0-6187-4714-9818-81F4638C6CAF.jpeg
A89A5941-5491-42CD-B108-FC31BC1C2C04.jpeg
01FA3E3D-C721-433E-8FF1-61903748FDF3.jpeg
Lloyd
Post Reply

Return to “Knife Lore - Traditional Knives From the Old Days”