Shapleigh Hardware Co.

This forum is dedicated to the discussion and display of old knives. The rich history of all the many companies that made them through the early years will be found here as well as many fine examples of the cutlers art. Share pictures of your old knives and your knowledge here!
Post Reply
User avatar
TPK
Posts: 10111
Joined: Sun Mar 31, 2019 6:16 pm
Location: Bayern, Germany

Re: Shapleigh Hardware Co.

Post by TPK »

So, my mom finally got around to mailing my D E. Thanks for looking & Thanks for the trade Joe! ::tu:: ::super_happy::
Attachments
P_20200329_093916.jpg
P_20200329_094235.jpg
P_20200329_093715.jpg
P_20200329_093641.jpg
P_20200329_093811.jpg
TOM - KGFG - (Knife-Guy-From-Germany)

I believe..., every knife is a soul, looking for a soulmate. :wink:

Weebit-Nano https://www.weebit-nano.com/
https://en.m.wikipedia.org/wiki/Weebit_Nano

US - ARMY - COMBAT - ENGINEERS - 1990 - 1993 - God Bless Our Troops!
User avatar
Waukonda
Gold Tier
Gold Tier
Posts: 3775
Joined: Sat Aug 31, 2019 1:35 am

Re: Shapleigh Hardware Co.

Post by Waukonda »

That is a great looking Shapleigh, MKAD! ::tu::
(MKAD = Messer Kerl aus Deutschland) ::groove::
Ike
User avatar
FRJ
Posts: 15173
Joined: Fri May 14, 2010 1:43 pm
Location: Ct.

Re: Shapleigh Hardware Co.

Post by FRJ »

Thanks for putting that nice little Shapleigh DE in here, Tom.
It is a beauty. A great little carry, I'm sure.

It would also look nice in Lee's " Homage to Traditional Pen Knives" thread if you were so inclined.
Joe
User avatar
TPK
Posts: 10111
Joined: Sun Mar 31, 2019 6:16 pm
Location: Bayern, Germany

Re: Shapleigh Hardware Co.

Post by TPK »

Waukonda wrote: Sun Mar 29, 2020 12:34 pm That is a great looking Shapleigh, MKAD! ::tu::
(MKAD = Messer Kerl aus Deutschland) ::groove::
Thank you Sir! ::handshake::
TOM - KGFG - (Knife-Guy-From-Germany)

I believe..., every knife is a soul, looking for a soulmate. :wink:

Weebit-Nano https://www.weebit-nano.com/
https://en.m.wikipedia.org/wiki/Weebit_Nano

US - ARMY - COMBAT - ENGINEERS - 1990 - 1993 - God Bless Our Troops!
User avatar
TPK
Posts: 10111
Joined: Sun Mar 31, 2019 6:16 pm
Location: Bayern, Germany

Re: Shapleigh Hardware Co.

Post by TPK »

FRJ wrote: Sun Mar 29, 2020 4:24 pm Thanks for putting that nice little Shapleigh DE in here, Tom.
It is a beauty. A great little carry, I'm sure.

It would also look nice in Lee's " Homage to Traditional Pen Knives" thread if you were so inclined.
::tu:: :D
TOM - KGFG - (Knife-Guy-From-Germany)

I believe..., every knife is a soul, looking for a soulmate. :wink:

Weebit-Nano https://www.weebit-nano.com/
https://en.m.wikipedia.org/wiki/Weebit_Nano

US - ARMY - COMBAT - ENGINEERS - 1990 - 1993 - God Bless Our Troops!
User avatar
jxr1197
Posts: 963
Joined: Mon Nov 13, 2017 3:47 am

Re: Shapleigh Hardware Co.

Post by jxr1197 »

Here's an extra fancy Norvell era dogleg jack with step bolsters and MOP covers.
norvellshap.jpg
- Jason
BWT
Posts: 1868
Joined: Sat Jul 08, 2017 1:59 pm
Location: Central Florida

Re: Shapleigh Hardware Co.

Post by BWT »

Very nice Jason ::tu:: ::tu::
Bill
JAMESC41001
Posts: 892
Joined: Fri Nov 23, 2012 8:14 pm

Re: Shapleigh Hardware Co.

Post by JAMESC41001 »

Nice Jason
User avatar
peanut740
Gold Tier
Gold Tier
Posts: 7575
Joined: Fri Jan 23, 2009 2:32 pm
Location: Ohio, along the river
Contact:

Re: Shapleigh Hardware Co.

Post by peanut740 »

Jason ::tu::
Roger
User avatar
FRJ
Posts: 15173
Joined: Fri May 14, 2010 1:43 pm
Location: Ct.

Re: Shapleigh Hardware Co.

Post by FRJ »

Oh, that's just a beauty.
That spear hits all the high notes.
Thank you, Jason, for putting that fine knife in this thread.
Joe
Duffer
Posts: 1020
Joined: Sat Sep 19, 2015 9:33 pm
Location: Las Vegas, NV

Re: Shapleigh Hardware Co.

Post by Duffer »

Hard to beat a DE wrapped in MOP ::tu:: Very attractive especially that pattern!
Lloyd
User avatar
TPK
Posts: 10111
Joined: Sun Mar 31, 2019 6:16 pm
Location: Bayern, Germany

Re: Shapleigh Hardware Co.

Post by TPK »

Ohhh, what an eye catcher! :shock: Touchdown! ::tu:: :D
TOM - KGFG - (Knife-Guy-From-Germany)

I believe..., every knife is a soul, looking for a soulmate. :wink:

Weebit-Nano https://www.weebit-nano.com/
https://en.m.wikipedia.org/wiki/Weebit_Nano

US - ARMY - COMBAT - ENGINEERS - 1990 - 1993 - God Bless Our Troops!
User avatar
jxr1197
Posts: 963
Joined: Mon Nov 13, 2017 3:47 am

Re: Shapleigh Hardware Co.

Post by jxr1197 »

It's nice to come back and see a bunch of feedback on a post. Thanks guys ::tu::
I was excited to get my hands on this one. By far the nicest Shapleigh I own now.
- Jason
User avatar
LongBlade
Posts: 3416
Joined: Mon May 18, 2015 3:00 pm
Location: Woods of CT

Re: Shapleigh Hardware Co.

Post by LongBlade »

jxr1197 wrote: Sat Jun 20, 2020 12:23 am Here's an extra fancy Norvell era dogleg jack with step bolsters and MOP covers.
norvellshap.jpg
Beauty all the way around jxr1197 ::tu:: ::tu:: ... Just a guess on my part - but I think this was made under contract by Empire Knife Co for Shapleigh - The reason I say this is based on the long pull on master and how it opens into the swedge of the blade - something I noticed and seemed to be pretty consistent at least on the Empires I have see in terms of the long pulls - and my Empire-made Shapleigh cattle knife has the same long pull design.. again just my guess and opinion...
____________________________________________________________________________
Lee
User avatar
jxr1197
Posts: 963
Joined: Mon Nov 13, 2017 3:47 am

Re: Shapleigh Hardware Co.

Post by jxr1197 »

LongBlade wrote: Sat Jun 20, 2020 4:37 pm ....but I think this was made under contract by Empire Knife Co for Shapleigh...
I agree with you. Before it arrived I was thinking it was a German Boker - the step bolsters threw me off and the seller's pics didn't show everything. When I got my hands on it I figured it was an Empire and searched around until I found a pic of an Empire with similar bolsters. Now I'll also think to check the long pull/swedge area if I come across another Norvell Shapleigh. Thanks for the tip. ::tu::
- Jason
User avatar
New_Windsor_NY
Gold Tier
Gold Tier
Posts: 10826
Joined: Thu Nov 08, 2018 4:50 pm
Location: I'm On The Far Right On The Left Coast In Commiefornia

Re: Shapleigh Hardware Co.

Post by New_Windsor_NY »

This pocket knife arrived yesterday. It is one out of a group of five pocket knives that I bought, but not for this particular knife. This is a SHAPLEIGH (D-E) HDW CO. B478, 2 blade, 3 tang stamps, 3 1/8" closed, advertising pocket knife. It says "CARDWELL WESTINGHOUSE" on one side and "FRICTION DRAFT GEAR" on the other side. If you Google the advertised company, there is information (railroad equipment manufacturer). I gave it a very minor cleaning, took some pictures and here it is.
Click on a picture to ENLARGE.
Attachments
image.jpeg
image.jpeg
image.jpeg
image.jpeg
image.jpeg
image.jpeg
image.jpeg
Kid: "Wish we had time to bury them fellas."
Josey Wales: "To hell with them fellas. Buzzards got to eat, same as worms."
Clint Eastwood-The Outlaw Josey Wales

Skip
User avatar
FRJ
Posts: 15173
Joined: Fri May 14, 2010 1:43 pm
Location: Ct.

Re: Shapleigh Hardware Co.

Post by FRJ »

Nice little Shapleigh, Skip. ::tu::
It looks like it's in great condition. ::nod::
Joe
User avatar
Miller Bro's
Gold Tier
Gold Tier
Posts: 11618
Joined: Mon Feb 16, 2009 11:22 pm
Location: Earth

Re: Shapleigh Hardware Co.

Post by Miller Bro's »

Nice one skip, I have one similar.

No bail and nothing on the back side.
Attachments
25-1.jpg
AAPK Janitor
369
User avatar
New_Windsor_NY
Gold Tier
Gold Tier
Posts: 10826
Joined: Thu Nov 08, 2018 4:50 pm
Location: I'm On The Far Right On The Left Coast In Commiefornia

Re: Shapleigh Hardware Co.

Post by New_Windsor_NY »

FRJ wrote: Fri Jun 18, 2021 11:22 pm Nice.....
Thank you Joe.🍻

Miller Bro's wrote: Fri Jun 18, 2021 11:55 pm Nice.....
Thank you Dimitri.🍻
Yours is looking good also. ::tu:: ::tu::
Kid: "Wish we had time to bury them fellas."
Josey Wales: "To hell with them fellas. Buzzards got to eat, same as worms."
Clint Eastwood-The Outlaw Josey Wales

Skip
User avatar
Papa Bones
Silver Tier
Silver Tier
Posts: 3994
Joined: Wed Apr 22, 2020 4:29 pm
Location: Alabama, Roll Tide Country

Re: Shapleigh Hardware Co.

Post by Papa Bones »

New_Windsor_NY wrote: Fri Jun 18, 2021 8:50 pm This pocket knife arrived yesterday. It is one out of a group of five pocket knives that I bought, but not for this particular knife. This is a SHAPLEIGH (D-E) HDW CO. B478, 2 blade, 3 tang stamps, 3 1/8" closed, advertising pocket knife. It says "CARDWELL WESTINGHOUSE" on one side and "FRICTION DRAFT GEAR" on the other side. If you Google the advertised company, there is information (railroad equipment manufacturer). I gave it a very minor cleaning, took some pictures and here it is.
Click on a picture to ENLARGE.
Another nice Steelie to add to your group Skip. ::tu::
Sometimes I Sit and Think ::hmm:: .... Other times I just Sit
I May Grow Older, But I refuse to Grow Up!!
I'll sharpen it for you, but I don't give out band-aids!!

Smitty
User avatar
FRJ
Posts: 15173
Joined: Fri May 14, 2010 1:43 pm
Location: Ct.

Re: Shapleigh Hardware Co.

Post by FRJ »

Very nice little pen knife, Dimitri. ::tu::
Joe
User avatar
New_Windsor_NY
Gold Tier
Gold Tier
Posts: 10826
Joined: Thu Nov 08, 2018 4:50 pm
Location: I'm On The Far Right On The Left Coast In Commiefornia

Re: Shapleigh Hardware Co.

Post by New_Windsor_NY »

Papa Bones wrote: Sat Jun 19, 2021 3:33 am Another.....
Thank you Smitty.🍻
Kid: "Wish we had time to bury them fellas."
Josey Wales: "To hell with them fellas. Buzzards got to eat, same as worms."
Clint Eastwood-The Outlaw Josey Wales

Skip
User avatar
espn77
Posts: 3545
Joined: Sat Mar 05, 2016 4:01 pm
Location: South west Kansas by way of Texas

Re: Shapleigh Hardware Co.

Post by espn77 »

I like the boxes with the buttons on them.
Attachments
20210627_173512.jpg
User avatar
espn77
Posts: 3545
Joined: Sat Mar 05, 2016 4:01 pm
Location: South west Kansas by way of Texas

Re: Shapleigh Hardware Co.

Post by espn77 »

.
Attachments
20210627_173433.jpg
User avatar
FRJ
Posts: 15173
Joined: Fri May 14, 2010 1:43 pm
Location: Ct.

Re: Shapleigh Hardware Co.

Post by FRJ »

That's a very nice little pen knife you have there, Keith.
The box is a gem with a velvet like bed for the knives. And a button. They went the extra mile and added a button.
That is pretty nice. Thanks for the great addition to the thread.
Joe
Post Reply

Return to “Knife Lore - Traditional Knives From the Old Days”