Proper Knife Storage
Proper Knife Storage
I am sure there are better ways to store a knife than in a bucket full of water with a bunch tools. My question is; Is there a worse way to store a knife?
As a side note, I am thinking about listing this on Flea-Bay... I guess the condition could be described as "mint or near mint"
As a side note, I am thinking about listing this on Flea-Bay... I guess the condition could be described as "mint or near mint"
Please visit my AAPK store: https://www.allaboutpocketknives.com/ca ... er_id=2383
They say, “Hard work never hurt anyone”, but I'm still not willing to risk it.
They say, “Hard work never hurt anyone”, but I'm still not willing to risk it.
Re: Proper Knife Storage
looks like a lot of old collectibles at some auctions Ive been to. hope ya didnt get too ddep on em!
Re: Proper Knife Storage
A coworker and I were given a carpentry job. The company did not own a circular saw, and I wanted to go buy one for the job. We had a boss who was a tremendous pain in the neck, and he had a circular saw. It wasn't just any saw, it was the best saw in the galaxy. We'd just use his saw for the job, and we had to promise faithfully that we wouldn't destroy his saw.
I had a really bad feeling about this.
We were presented with the saw without equal. To me it looked like a run of the mill Craftsman saw, but what the heck do I know? We got the job done, and the guy I was working with tossed the highly prized saw into a bucket and we moved on to whatever was next.
It started raining. No big deal, but the guy had parked his truck under the eave of a building in such a way that the roof drained right into the bucket holding the sacred saw. The bucket filled up in a hurry...
The saw survived. We cleaned it up, and it spent several hours in a barely warm oven. We swore each other to secrecy and never volunteered any information on the subject.
I had a really bad feeling about this.
We were presented with the saw without equal. To me it looked like a run of the mill Craftsman saw, but what the heck do I know? We got the job done, and the guy I was working with tossed the highly prized saw into a bucket and we moved on to whatever was next.
It started raining. No big deal, but the guy had parked his truck under the eave of a building in such a way that the roof drained right into the bucket holding the sacred saw. The bucket filled up in a hurry...
The saw survived. We cleaned it up, and it spent several hours in a barely warm oven. We swore each other to secrecy and never volunteered any information on the subject.
- tongueriver
- Posts: 6834
- Joined: Tue Sep 16, 2008 8:01 pm
Re: Proper Knife Storage
I pulled a big toolbox out of the back of my pickup (which has a topper), only to find that the topper had leaked right onto the toolbox and down inside, where quite a lot of tools had been safe and sound. I managed to save a few things; the tool box was not one of them. I didn't catch the problem for several months, as I rarely used the truck. Now even the truck is gone. Yes; some storage protocols may be better than others.
Re: Proper Knife Storage
I had a leak in my garage roof and it ruined a bunch of tools as well I had them in milk cratestongueriver wrote: ↑Tue Feb 21, 2023 12:12 am I pulled a big toolbox out of the back of my pickup (which has a topper), only to find that the topper had leaked right onto the toolbox and down inside, where quite a lot of tools had been safe and sound. I managed to save a few things; the tool box was not one of them. I didn't catch the problem for several months, as I rarely used the truck. Now even the truck is gone. Yes; some storage protocols may be better than others.
Please visit my AAPK store: https://www.allaboutpocketknives.com/ca ... er_id=2383
They say, “Hard work never hurt anyone”, but I'm still not willing to risk it.
They say, “Hard work never hurt anyone”, but I'm still not willing to risk it.
Re: Proper Knife Storage
I got the bucket for helping out a buddy... I just wish he had remembered that he had some lids for them buckets and had put the lid on!
Please visit my AAPK store: https://www.allaboutpocketknives.com/ca ... er_id=2383
They say, “Hard work never hurt anyone”, but I'm still not willing to risk it.
They say, “Hard work never hurt anyone”, but I'm still not willing to risk it.
Re: Proper Knife Storage
Three rules of borrowing tools:
1) Never admit to anything when something goes wrong with the tool
2) When something goes wrong with the tool, blame your co-worker, friend, son, brother, etc.
3) Slap a coating of grease and grime over affected/broken area, then get someone else, co-worker, friend, son, brother, etc. to return the broken tool
Please visit my AAPK store: https://www.allaboutpocketknives.com/ca ... er_id=2383
They say, “Hard work never hurt anyone”, but I'm still not willing to risk it.
They say, “Hard work never hurt anyone”, but I'm still not willing to risk it.
- centennialknives
- Bronze Tier
- Posts: 148
- Joined: Fri Feb 03, 2023 1:35 pm
- Location: Washington, IL (near Peoria)
- Contact:
Re: Proper Knife Storage
Love this story --I'd venture to say if the boss was a decent fellow, he'd have been told about it and helped clean it back up. But yeah, sometimes best to avoid those conversations with arses!!!dsutton24 wrote: ↑Mon Feb 20, 2023 11:27 pm A coworker and I were given a carpentry job. The company did not own a circular saw, and I wanted to go buy one for the job. We had a boss who was a tremendous pain in the neck, and he had a circular saw. It wasn't just any saw, it was the best saw in the galaxy. We'd just use his saw for the job, and we had to promise faithfully that we wouldn't destroy his saw.
I had a really bad feeling about this.
We were presented with the saw without equal. To me it looked like a run of the mill Craftsman saw, but what the heck do I know? We got the job done, and the guy I was working with tossed the highly prized saw into a bucket and we moved on to whatever was next.
It started raining. No big deal, but the guy had parked his truck under the eave of a building in such a way that the roof drained right into the bucket holding the sacred saw. The bucket filled up in a hurry...
The saw survived. We cleaned it up, and it spent several hours in a barely warm oven. We swore each other to secrecy and never volunteered any information on the subject.
Robert
Washington, IL (near Peoria)
"Always keep an edge on your knife 'cause a good sharp edge is a man's best hedge against the vague uncertainties of life." - Corb Lund
Washington, IL (near Peoria)
"Always keep an edge on your knife 'cause a good sharp edge is a man's best hedge against the vague uncertainties of life." - Corb Lund
Re: Proper Knife Storage
Here is an update on cleaning up the blade...it took a lot more damage than I thought it had from its "time in the bucket", but there is still some hope to bring it back to life yet...
Please visit my AAPK store: https://www.allaboutpocketknives.com/ca ... er_id=2383
They say, “Hard work never hurt anyone”, but I'm still not willing to risk it.
They say, “Hard work never hurt anyone”, but I'm still not willing to risk it.
Re: Proper Knife Storage
I have oiled it up and the next step is to work on the blade with steel wool/ scotch bright /sandpaper.
Please visit my AAPK store: https://www.allaboutpocketknives.com/ca ... er_id=2383
They say, “Hard work never hurt anyone”, but I'm still not willing to risk it.
They say, “Hard work never hurt anyone”, but I'm still not willing to risk it.
- Madmarco
- Gold Tier
- Posts: 9645
- Joined: Wed May 20, 2020 12:09 am
- Location: Smack dab in the middle of Canada
Re: Proper Knife Storage
I admire your determination, Dog.
I'll bet you bring it right back to life.
When it's finished, it definitely would be interesting to list it on ebay, just to see who would notice any differences between it and any regular used bowie for sale.
I'll bet you bring it right back to life.
When it's finished, it definitely would be interesting to list it on ebay, just to see who would notice any differences between it and any regular used bowie for sale.
- Madmarco
- Gold Tier
- Posts: 9645
- Joined: Wed May 20, 2020 12:09 am
- Location: Smack dab in the middle of Canada
Re: Proper Knife Storage
!GSPTOPDOG wrote: ↑Wed Feb 22, 2023 3:59 amThree rules of borrowing tools:
1) Never admit to anything when something goes wrong with the tool
2) When something goes wrong with the tool, blame your co-worker, friend, son, brother, etc.
3) Slap a coating of grease and grime over affected/broken area, then get someone else, co-worker, friend, son, brother, etc. to return the broken tool
Rules to live by!
Re: Proper Knife Storage
I didn't spot that there were other tools in that.
I honestly thought you'd dug the knife out of a bucket of KFC Barbecue Sauce and old chicken bones!!
I honestly thought you'd dug the knife out of a bucket of KFC Barbecue Sauce and old chicken bones!!
WARNING: This forum post contains words known to the State of California to cause cancer and birth defects or other reproductive harm.
Re: Proper Knife Storage
I think KFC Barbecue Sauce and old chicken bones might be worth more in the end!
Please visit my AAPK store: https://www.allaboutpocketknives.com/ca ... er_id=2383
They say, “Hard work never hurt anyone”, but I'm still not willing to risk it.
They say, “Hard work never hurt anyone”, but I'm still not willing to risk it.
Re: Proper Knife Storage
Marco, I think I'll have to list it on Flea-bay as "Near-mint" condition... like so many other knives I see for sale on that wonderful site...
Please visit my AAPK store: https://www.allaboutpocketknives.com/ca ... er_id=2383
They say, “Hard work never hurt anyone”, but I'm still not willing to risk it.
They say, “Hard work never hurt anyone”, but I'm still not willing to risk it.
- Madmarco
- Gold Tier
- Posts: 9645
- Joined: Wed May 20, 2020 12:09 am
- Location: Smack dab in the middle of Canada
Re: Proper Knife Storage
That's what I'm saying, Dog!
List it as "Near-mint" and see who knows the difference!
Be good for some laughs anyway!
List it as "Near-mint" and see who knows the difference!
Be good for some laughs anyway!
Re: Proper Knife Storage
if I listed it that way I'll probably get spotted and called out and then posted on AAPK by another member for deceptive eBay listing....
Please visit my AAPK store: https://www.allaboutpocketknives.com/ca ... er_id=2383
They say, “Hard work never hurt anyone”, but I'm still not willing to risk it.
They say, “Hard work never hurt anyone”, but I'm still not willing to risk it.
- Madmarco
- Gold Tier
- Posts: 9645
- Joined: Wed May 20, 2020 12:09 am
- Location: Smack dab in the middle of Canada
Re: Proper Knife Storage
Prolly!
- SwedgeHead
- Silver Tier
- Posts: 258
- Joined: Thu Jan 19, 2023 12:23 am
Re: Proper Knife Storage
"for parts or rustoration"
Re: Proper Knife Storage
Please visit my AAPK store: https://www.allaboutpocketknives.com/ca ... er_id=2383
They say, “Hard work never hurt anyone”, but I'm still not willing to risk it.
They say, “Hard work never hurt anyone”, but I'm still not willing to risk it.
Re: Proper Knife Storage
You going to sell this one Rich, or keep it? I’d like to buy it, if the cost of resurrection doesn’t exceed my budget.
Parker
Parker
Re: Proper Knife Storage
Parker, if I can fully resuscitate it, I will keep you advised
Please visit my AAPK store: https://www.allaboutpocketknives.com/ca ... er_id=2383
They say, “Hard work never hurt anyone”, but I'm still not willing to risk it.
They say, “Hard work never hurt anyone”, but I'm still not willing to risk it.
Re: Proper Knife Storage
Thanks, I appreciate it.
Parker
Parker
- 1967redrider
- Gold Tier
- Posts: 16106
- Joined: Wed Feb 02, 2011 4:23 pm
- Location: Alexandria, VA
- Contact:
Re: Proper Knife Storage
That first picture reminded me of a bucket of snow crab shells and guts . . . and I'm not even hungry.
Pocket, fixed, machete, axe, it's all good!
You're going to look awfully silly with that knife sticking out of your @#$. -Clint Eastwood, High Plains Drifter
You're going to look awfully silly with that knife sticking out of your @#$. -Clint Eastwood, High Plains Drifter
-
- Bronze Tier
- Posts: 327
- Joined: Fri Dec 14, 2018 3:37 am
- Location: East Kentucky
Re: Proper Knife Storage
Any of you all watch Curse of Oak Island on the History Channel? I would put the whole bucket on ebay and call it bobby dazzlers found metal detecting in the money pit 90 foot deep. Probably dropped by the Knights Templers. Should get some real bids dog!! That show is on its 10th season and that looks like what they find every week.
Earth First! We'll mine the other planets later.