Japanese "Sabre" Brand Knives
-
- Posts: 149
- Joined: Thu Jun 13, 2019 3:18 pm
- Location: Tennessee
Re: Japanese "Sabre" Brand Knives
Someone somewhere down the line could potentially have had an even bigger pile of them and it's since trickled down to that amount by the time the collection ended up at the flea market..
Re: Japanese "Sabre" Brand Knives
I'm going to guess the 1960's. Sabres don't bring very much money. My grandfather carried one and I have it now. They usually don't bring much more than about $10...but it's priceless to me.
Heretical Refurb / Mods of cheap old folders, since late 2018
- Sharpnshinyknives
- Gold Tier
- Posts: 5134
- Joined: Mon Jul 16, 2018 2:32 am
- Location: Indiana
- Contact:
Re: Japanese "Sabre" Brand Knives
I am going to guess also, but I think it’s from the 70’s. Just from experience handling these over the years. But Doc could also be correct. And he is correct they don’t bring much even in pristine condition. You have 10 dollar knife there.
SSk Mark “Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same.” Ronald Reagan
Re: Japanese "Sabre" Brand Knives
Hi all, brand new member - I discovered this forum after I discovered I had a Sabre Japan pocket knife that I knew nothing about.
After reading through this forum, I'm somewhat confused. I read that there is a model number that appears under the words "Sabre" and "Japan" on the main blade - this knife doesn't appear to have a number?? I've taken some photos so that I might get some help id'ing this knife. Thanks.
After reading through this forum, I'm somewhat confused. I read that there is a model number that appears under the words "Sabre" and "Japan" on the main blade - this knife doesn't appear to have a number?? I've taken some photos so that I might get some help id'ing this knife. Thanks.
- Madmarco
- Gold Tier
- Posts: 9877
- Joined: Wed May 20, 2020 12:09 am
- Location: Smack dab in the middle of Canada
Re: Japanese "Sabre" Brand Knives
Hey Chip! I can't help with your knife, but others will be along who can, so stick around and have some fun! to AAPK!ChipB wrote: ↑Sun Nov 29, 2020 8:16 pm Hi all, brand new member - I discovered this forum after I discovered I had a Sabre Japan pocket knife that I knew nothing about.
After reading through this forum, I'm somewhat confused. I read that there is a model number that appears under the words "Sabre" and "Japan" on the main blade - this knife doesn't appear to have a number?? I've taken some photos so that I might get some help id'ing this knife. Thanks.
Re: Japanese "Sabre" Brand Knives
I have a beat-up Peanut my Grandad have me around here somewhere.
Here's one that was likely made by Ulster or Schrade. USA-made and Swinden construction. Blade is identical to early production 881 and 8OTs. Handles are brown/tan jigged Delrin.
Tang stamp is "SABRE" over "USA" on the mark side, and "SABRE" over "MONARCH" over "231" on the pile side.
Here's one that was likely made by Ulster or Schrade. USA-made and Swinden construction. Blade is identical to early production 881 and 8OTs. Handles are brown/tan jigged Delrin.
Tang stamp is "SABRE" over "USA" on the mark side, and "SABRE" over "MONARCH" over "231" on the pile side.
Re: Japanese "Sabre" Brand Knives
viewtopic.php?f=31&t=68550
Just figured I'd post this link here..I'm reducing the price one more time..$55 shipped CONUS.. Sabre Japan barlows are a great EDCS..nice bone scales, they take and hold a razor sharp edge...all have good snap and zero to minimal side play.. I have 4 or 5 that I cleaned up and sharpened that I carry off and on...thanks for looking
Just figured I'd post this link here..I'm reducing the price one more time..$55 shipped CONUS.. Sabre Japan barlows are a great EDCS..nice bone scales, they take and hold a razor sharp edge...all have good snap and zero to minimal side play.. I have 4 or 5 that I cleaned up and sharpened that I carry off and on...thanks for looking
Ryan
“That’ll be the day”—-John Wayne
“That’ll be the day”—-John Wayne
Re: Japanese "Sabre" Brand Knives
My Grandfather gave me this a long time ago. I think it is the Sabre 638 but there are no numbers in it. Like others have said probably not worth much but priceless to me.
-
- Posts: 10132
- Joined: Tue Nov 06, 2007 9:02 pm
- Location: Tecumseh,Michigan
Re: Japanese "Sabre" Brand Knives
Here is one I posted on another forum:The handles were broken when I got it(free!)so I made a new set from Plexiglass. The originals were clear as well.Note the name.
Also a Sabre Tool Box;sort of a modern day TL-29
Also a Sabre Tool Box;sort of a modern day TL-29
Adventure BEFORE Dementia!
Re: Japanese "Sabre" Brand Knives
Sabre Stockman w/o numbers. Only has Sabre Japan on tang. Interesting jigging on the handles, looks like bone and not delrin. Decent little knife for $6
A wise man can learn more from a foolish question than a fool can learn from a wise answer.
Bruce Lee
Bruce Lee
Re: Japanese "Sabre" Brand Knives
I like it, TJ..good deal.. I have several Sabre Japan barlows with saw cut bone scales, good, solid knives..
Ryan
“That’ll be the day”—-John Wayne
“That’ll be the day”—-John Wayne
- OLDE CUTLER
- Gold Tier
- Posts: 4344
- Joined: Wed Oct 11, 2017 8:11 pm
- Location: South Dakota
Re: Japanese "Sabre" Brand Knives
I recently picked up this Sabre pen knife for a few bucks. It is 3 1/4" OAL, stainless steel, with faux MOP (or mother of toilet seat) handles. There is no pattern number stamped on it as with most other Sabres I have.
"Sometimes even the blind chicken finds corn"
Re: Japanese "Sabre" Brand Knives
Clear knives are beyond cool, but highly uncommon. Most seem to be display knives/salesman's samples, which are rare, and seem to sell for large sums.knife7knut wrote: ↑Fri Dec 18, 2020 3:16 pm Here is one I posted on another forum:The handles were broken when I got it(free!)so I made a new set from Plexiglass. The originals were clear as well.Note the name.
Also a Sabre Tool Box;sort of a modern day TL-29
Ontario has the "Ice" Wraith which is supposedly clear, but due to the plastic used and handle pattern, is very hazy-looking. I may have to find cheap lockback and build my own.
-
- Posts: 10132
- Joined: Tue Nov 06, 2007 9:02 pm
- Location: Tecumseh,Michigan
Re: Japanese "Sabre" Brand Knives
If you do decide to build one,I would suggest using "optical grade Lexan II" which is the material used in hockey rink windows and prescription lenses.It is crystal clear and distortion free and coated with a scratch resistant surface.It is also very expensive. The stuff I use was culled from pieces of a broken window in a hockey rink. A friend of mine's daughter works at an arena used by a minor league hockey team and he got some of it when he noticed them throwing the stuff in a dumpster.It is 1/2" thick but fairly easy to cut down.To cut shapes in it I use a sabre saw fitted with a laminate blade that cuts in the opposite direction of a normal blade and prevents the Lexan from fusing back together after cutting.cody6268 wrote: ↑Mon Apr 19, 2021 2:55 pmClear knives are beyond cool, but highly uncommon. Most seem to be display knives/salesman's samples, which are rare, and seem to sell for large sums.knife7knut wrote: ↑Fri Dec 18, 2020 3:16 pm Here is one I posted on another forum:The handles were broken when I got it(free!)so I made a new set from Plexiglass. The originals were clear as well.Note the name.
Also a Sabre Tool Box;sort of a modern day TL-29
Ontario has the "Ice" Wraith which is supposedly clear, but due to the plastic used and handle pattern, is very hazy-looking. I may have to find cheap lockback and build my own.
To cut it to thickness I use a standard fine tooth hacksaw with the piece clamped in a soft jawed vise and cut very slowly as it will shatter if too much vibration happens.I shape it on a 1x30 belt sander that also has a 5 inch wheel on the side using 150 grit discs and 80 grit belts.Finish sand with 220 grit wet-or-dry paper(wet) and polish with Mother's Mag Wheel Polish by hand.
Here are a couple of prototype knives I made using the Lexan.
Adventure BEFORE Dementia!
-
- Posts: 5
- Joined: Tue Apr 27, 2021 2:03 am
Re: Japanese "Sabre" Brand Knives
Now, you seem experts in Sabre knives. I have a nice Sabre Barlow but the number is only 3 as you can see on the pictures. What to do you think about it?Another Knife Collector wrote: ↑Mon Nov 09, 2015 3:16 am They certainly aren't the best quality knives ever made, but I've recently developed an interest in collecting Japanese Sabre brand knives and decided to share what I have learned here. They are cheap and common, so they make a good affordable knife for a young collector or a collector on a tight budget. Sabre was a brand owned by Cole National Corporation, a company based in Ohio that dealt in a number of different markets. For a number of years Cole even owned Ka-Bar. The Sabre brand can be found on knives made all over the world, including Germany, Japan, USA, Pakistan, and Hong Kong. I've focused on the Japanese line as it seems to have been the most popular and longest lived of them. They were affordable knives, ones to give away, or to throw in a tool box or tackle box and not worry about. The Japanese made Sabres came in a variety of patterns and used a standard pattern number system. The earliest knives had no pattern numbers stamped on them but would fit into the standard system used later. Next, patterns began to be marked using a simple two digit number, and finally a three digit number. The three digit pattern numbers are all the same as the two digit, except with a "6" preceding the two digit number. For example, a "29" Large Barlow became a "629" Large Barlow, with no change in the actual knife. Sixes tend to look like fives on certain bad/damaged stamps they used. Japanese Sabres changed in material and manufacture through the years. They began with carbon steel blades, nickel silver bolsters, brass pins/liners and bone handles, and evolved to using all stainless blades and fittings and plastic handles.
Re: Japanese "Sabre" Brand Knives
Going through my knife boxes has turned up a BUNCH of Saber brand knives... it was a surprise as to how many I have
Please visit my AAPK store: https://www.allaboutpocketknives.com/ca ... er_id=2383
They say, “Hard work never hurt anyone”, but I'm still not willing to risk it.
They say, “Hard work never hurt anyone”, but I'm still not willing to risk it.
Re: Japanese "Sabre" Brand Knives
Not much I can add but I also have a few Sabres in my knife box. I believe most of
them are stamped Japan. Now back when I was a youngster, say 55 or maybe a few more
years ago they sold Sabres at the local dollar store. Back then things went for 3 for a dollar
or 2 for a dollar and prices like that. The knife display up by the registers said .99cents.
I remember because whenever I was in there I had to look at them.
them are stamped Japan. Now back when I was a youngster, say 55 or maybe a few more
years ago they sold Sabres at the local dollar store. Back then things went for 3 for a dollar
or 2 for a dollar and prices like that. The knife display up by the registers said .99cents.
I remember because whenever I was in there I had to look at them.
Re: Japanese "Sabre" Brand Knives
Can someone tell me the difference between the sabre 676 and the 76. The handles are different material but seem identical otherwise
-
- Posts: 10132
- Joined: Tue Nov 06, 2007 9:02 pm
- Location: Tecumseh,Michigan
Re: Japanese "Sabre" Brand Knives
Welcome to the forums!
It appears the top one is a synthetic jigged to look like bone whereas the bottom one appears to be genuine bone with a different style of jigging.
Adventure BEFORE Dementia!
- OLDE CUTLER
- Gold Tier
- Posts: 4344
- Joined: Wed Oct 11, 2017 8:11 pm
- Location: South Dakota
Re: Japanese "Sabre" Brand Knives
I picked up a couple of Sabre knives over the weekend at a gunshow for $7 total. One is a daddy Barlow 5" OAL, and the other is a number 5 jack, 3 and 5/16" OAL. The daddy Barlow is sawcut bone handled, and the #5 jack is bone handled with the familiar Sabre criss cross jigging on the bone. Both are in decent shape and I will be using them for EDC.
"Sometimes even the blind chicken finds corn"
Re: Japanese "Sabre" Brand Knives
We had both of those as children. (I had the #608 and my older brother Gary had the #677). During road trips, mom would routinely borrow my #608 to prepare bologna sandwiches.jerryd6818 wrote: ↑Mon Nov 09, 2015 4:27 am I have a #8 Melon Tester and a #677 Melon Tester. Both with faux pearl handles.
Yep, lots of memories there!
-
- Posts: 3829
- Joined: Mon Jan 16, 2017 12:52 am
Re: Japanese "Sabre" Brand Knives
OLDE CUTLER, I like you Daddy Barlow!! I have one that I use around my shop and it is a great knife in my humble opinion. Nice sawcut bone. I paid 24 dollars.for mine at an antique store and I can tell you it's worth every penny to me. Here is mine.OLDE CUTLER wrote: ↑Tue Nov 30, 2021 7:23 pm I picked up a couple of Sabre knives over the weekend at a gunshow for $7 total. One is a daddy Barlow 5" OAL, and the other is a number 5 jack, 3 and 5/16" OAL. The daddy Barlow is sawcut bone handled, and the #5 jack is bone handled with the familiar Sabre criss cross jigging on the bone. Both are in decent shape and I will be using them for EDC.
IMG_4546.JPG
IMG_4547.JPG
IMG_4548.JPG
Re: Japanese "Sabre" Brand Knives
Great knives!
I knew some old-timers who wouldn't buy Japanese knives. They both fought against in the Pacific theater during WWII.
But I have a few, and most are well made and affordable knives. I buy them anytime I find them cheap, but that is getting harder to do all of the time. I think people are beginning to appreciate these knives more as time goes on!
I knew some old-timers who wouldn't buy Japanese knives. They both fought against in the Pacific theater during WWII.
But I have a few, and most are well made and affordable knives. I buy them anytime I find them cheap, but that is getting harder to do all of the time. I think people are beginning to appreciate these knives more as time goes on!
Jesus is life.
Everything else is just a hobby.
~Reverand
Everything else is just a hobby.
~Reverand