Sharpening Stones thread

A place to share, learn, & show off sharpening tips, tricks, techniques, & tools for sharpening edges of all kinds.
Post Reply
User avatar
TripleF
Bronze Tier
Bronze Tier
Posts: 18487
Joined: Mon Feb 14, 2011 3:42 pm
Location: West Central FL
Contact:

Sharpening Stones thread

Post by TripleF »

Recently I've stumbled on some sharpening stones......and now I keep my eyes open for them, but information is not easy to find.

Please place your pics and information in this thread so we might gather insights into use and identification.

Thanks to coffeecup's instruction I cleaned these 2 stones with Easy Off yesterday so identification might be easier...Here is what HE told me....

"the translucent stone is an Arkansas stone--looks like a nice one.

The other stone is hard to identify. It looks like a natural stone, but has inclusions of some harder mineral. At a guess, it was cut at or near one of the sites that cut stone for gristmills, or large grinders--think "pedal powered." If I'm right, it will be hard, fairly coarse scratches on steel, and "dulls" quickly because it isn't very friable. Might be from Ohio originally, but that is a guess. It has also been broken and glued back together at some point, probably long ago; they usually did this with sodium silicate ("water glass"--used to get it at drug stores). "
Attachments
lot2.5.14 002.JPG
SCOTT
HOME OF THE BRAVE! (not the scarety cats)

Colonial Knife Company History ebook:
https://gumroad.com/l/ZLDb
User avatar
TripleF
Bronze Tier
Bronze Tier
Posts: 18487
Joined: Mon Feb 14, 2011 3:42 pm
Location: West Central FL
Contact:

Re: Sharpening Stones thread

Post by TripleF »

I also have these....
Attachments
lot1.30.14 018.JPG
SCOTT
HOME OF THE BRAVE! (not the scarety cats)

Colonial Knife Company History ebook:
https://gumroad.com/l/ZLDb
User avatar
reddirtknives
Posts: 1213
Joined: Tue Nov 22, 2011 11:54 am
Location: Okrahoma where the wind comes sreeping down the prain

Re: Sharpening Stones thread

Post by reddirtknives »

Oh man I started collecting stones and sharpening tools… I also just boxed them all up and never thought to take pictures of them first… I have a hardware store pocketknife sharpening station in the bathroom I'll try to get pics of… It's my best piece anyway
DJ Red Tater Tip ~ Killer of Threads, Solo Pioneer in The Intergalactic Cutlery Trade
... ... `.~ RED DIRT KNIVES ~.` ... ...
User avatar
TripleF
Bronze Tier
Bronze Tier
Posts: 18487
Joined: Mon Feb 14, 2011 3:42 pm
Location: West Central FL
Contact:

Re: Sharpening Stones thread

Post by TripleF »

Just stumbled on this tidbit of info:

http://www.sharpeningsupplies.com/Diffe ... 1C117.aspx
SCOTT
HOME OF THE BRAVE! (not the scarety cats)

Colonial Knife Company History ebook:
https://gumroad.com/l/ZLDb
User avatar
whitebuffalo58
Posts: 2743
Joined: Tue Aug 17, 2010 2:35 am
Location: SW MO Heart of the Ozarks

Re: Sharpening Stones thread

Post by whitebuffalo58 »

These belonged to my grandpa.
I know he used the bottom one extensively, as well as the leather strop stick at the top. I'm pretty sure the white ones are Washita stones from Arkansas. The midsized darker ones are 2 sided man made stones, one a Carborundum (medium & fine), the other a Norton (coarse & medium). The smaller black one is actually an old broken stone celt from a Native American camp site, he picked it up years ago and seemed to favor it for just touching up an edge.
SANY0004.JPG


WB
jmh58
Posts: 13416
Joined: Wed Apr 02, 2008 11:22 pm
Location: Pgh,Pa

Re: Sharpening Stones thread

Post by jmh58 »

I think we need an area (Offical thread) to discuss all sharpening aspects!! WOW!! Where did those big words come from?? ::facepalm:: :lol: Lots of sharpening info could be passed/gleaned there!! We all want out blades smokin sharp now dont we??!! John :D
Not all who wander are lost!!

Of all the paths you take in life,
Make sure some of them are Dirt!!!
User avatar
reddirtknives
Posts: 1213
Joined: Tue Nov 22, 2011 11:54 am
Location: Okrahoma where the wind comes sreeping down the prain

Re: Sharpening Stones thread

Post by reddirtknives »

Well it was too cold to care about picture quality so this is what I came up with until better weather comes along. I'm not sure about the age of this what I call a "Sharpening Station" … It has to be at least a few decades old...
Attachments
step right up, don't be scared
step right up, don't be scared
backside
backside
the Carborundum indian is on each side
the Carborundum indian is on each side
better shot of Chief Carborundum
better shot of Chief Carborundum
DJ Red Tater Tip ~ Killer of Threads, Solo Pioneer in The Intergalactic Cutlery Trade
... ... `.~ RED DIRT KNIVES ~.` ... ...
User avatar
Miller Bro's
Gold Tier
Gold Tier
Posts: 11618
Joined: Mon Feb 16, 2009 11:22 pm
Location: Earth

Re: Sharpening Stones thread

Post by Miller Bro's »

AAPK Janitor
369
HiPower
Posts: 700
Joined: Sat Jul 18, 2009 12:12 am

Re: Sharpening Stones thread

Post by HiPower »

that sharpening station reminds me of the 50s when most hardware stores had a similar setup; usually at the front section of the outlet. HiPower
HiPower
User avatar
TripleF
Bronze Tier
Bronze Tier
Posts: 18487
Joined: Mon Feb 14, 2011 3:42 pm
Location: West Central FL
Contact:

Re: Sharpening Stones thread

Post by TripleF »

Miller Bro`s wrote:Check here Scott :wink:

http://www.allaboutpocketknives.com/kni ... =2&t=14018
Thanks Dimitri.....

Looking more for stone identification help... ::tu::
SCOTT
HOME OF THE BRAVE! (not the scarety cats)

Colonial Knife Company History ebook:
https://gumroad.com/l/ZLDb
User avatar
vikingdog
Posts: 2307
Joined: Mon Feb 08, 2010 2:46 am
Location: Pennsylvania The Keystone State

Re: Sharpening Stones thread

Post by vikingdog »

jmh58 wrote:I think we need an area (Offical thread) to discuss all sharpening aspects!! WOW!! Where did those big words come from?? ::facepalm:: :lol: Lots of sharpening info could be passed/gleaned there!! We all want out blades smokin sharp now dont we??!! John :D
http://www.allaboutpocketknives.com/kni ... sharpening

"Looking more for stone identification help..."

There is a lot of info about stones, especially on page 4.
"Progress might have been all right once, but it has gone on too long." Ogden Nash

My traditional Nordic knife blog: http://nordiskaknivar.wordpress.com/

Mike
User avatar
Mumbleypeg
Gold Tier
Gold Tier
Posts: 13371
Joined: Fri Apr 18, 2014 1:28 am
Location: Republic of Texas

Don't see many of these.....

Post by Mumbleypeg »

This came from a defunct hardware store in the Texas Hill Country. Only one I've ever seen in person, so I bought it. I gave $26 for it about 15 years ago. There are a couple of similar ones pictured in Sargent's 7th edition. The one I have is slightly different than those pictured. Saw one other one listed on eBay within the past year, which sold for a lot more than Sargent values them (not surprising).

During first half of 20th century these could be found sitting on the counter in old hardware stores, provided as a courtesy to the customers, who could sharpen their knives while discussing the news of the day. With the decline in men carrying and using pocket knives, plus the big box stores driving the decline in independently owned hardware stores, these have disappeared.

Ken
Attachments
Old W. R. Case & Sons whetstone
Old W. R. Case & Sons whetstone
Member AKTI, TSRA, NRA.

If your religion requires that you hate someone, you need a new religion.

When the people fear their government, that is tyranny. When government fears the people, that is freedom.

https://www.akti.org/
User avatar
orvet
Gold Tier
Gold Tier
Posts: 19326
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Re: Don't see many of these.....

Post by orvet »

AWESOME!!

I forgot about those though I have seen them before in old hardware stores.
I need to find one for my collection of different sharpening tools.

Great find! Thanks for sharing! ::tu:: ::tu::
Dale
AAPK Administrator

Please visit my AAPK store: www.allaboutpocketknives.com/orvet

Job 13:15

"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
User avatar
Capt. Farrel
Posts: 640
Joined: Thu Jan 03, 2013 6:21 pm
Location: Northern Germany

Re: Don't see many of these.....

Post by Capt. Farrel »

I have never seen these before and it must have been such a nice courtesy to customers. Too bad that all this is vanishing in this high tech age. I will never understand how a man can get along without a pocket knife at his side..... ::shrug::
Frank

OMG, it´s knives again!
User avatar
bestgear
Silver Tier
Silver Tier
Posts: 3815
Joined: Tue Apr 17, 2012 6:58 pm

Re: Don't see many of these.....

Post by bestgear »

Really nice piece, thanks for sharing the blast from the past.

About 20-years ago I purchased a long established bait and tackle shop in Connecticut and the shop came with a large DMT sharpening station at the checkout counter. It took me about 3-months to realize that over half of my customers used it with regularity, some even dropped-in just to sharpen their pocketknife.

Some good ideas never grown old.
Tom
AAPK Administrator

Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God.
User avatar
glennbad
Gold Tier
Gold Tier
Posts: 7340
Joined: Mon May 15, 2006 11:13 am
Location: NH

Re: Don't see many of these.....

Post by glennbad »

What a cool piece. Looks like it had a lot of use over the years.
knifeaholic
Gold Tier
Gold Tier
Posts: 5107
Joined: Fri Feb 03, 2006 3:41 am
Location: Central Massachusetts

Re: Don't see many of these.....

Post by knifeaholic »

Nice Find!!

I only ever recall seeing one in a hardware store about 1981.

Yours is an early one with the round oil can.

I will see if I can post some catalog images later.
Steve Pfeiffer, author of Collecting Case Knives: Identification and Price Guide published by Krause Publications.
User avatar
Mumbleypeg
Gold Tier
Gold Tier
Posts: 13371
Joined: Fri Apr 18, 2014 1:28 am
Location: Republic of Texas

Re: Don't see many of these.....

Post by Mumbleypeg »

Thanks for looking, and for sharing your comments. Glenn, It has definitely seen a lot of use over the years (it is sway backed). It is definitely a conversation piece among those who look at my collection. Wish it could talk!

Steve, I would really appreciate anything you have about its age, and any pics from old catalogs, etc. My poorly educated guess is it dates from the 50's. BTW the pictures in Sargent's 7th edition (page 273) appear to have the captions reversed as to the age of the items, respectively. I have a couple of old Case catalogs that describe this a "counter hone". As you have said, the older ones have the round oil can, but the blue and white label like this one has seems to be newer, more modern graphic art, which is what leads me to think this one may be a transition version.

Thanks,
Ken
Member AKTI, TSRA, NRA.

If your religion requires that you hate someone, you need a new religion.

When the people fear their government, that is tyranny. When government fears the people, that is freedom.

https://www.akti.org/
User avatar
treefarmer
Gold Tier
Gold Tier
Posts: 12819
Joined: Sun Oct 04, 2009 6:53 am
Location: Florida Panhandle(LA-Lower Alabama)

Re: Don't see many of these.....

Post by treefarmer »

We still have a building supply/hardware store that has a "swaybacked" whet rock on the counter. It doesn't have the oil can like the one in the picture but it is on a piece of wood. I'll check it out next time I'm in there ::tu:: . They might let me take a picture of if to post, never thought this would be a rare thing in a hardware store ::shrug:: . Times do change :( .
Treefarmer

A GUN IN THE HAND IS BETTER THAN A COP ON THE PHONE.
knifeaholic
Gold Tier
Gold Tier
Posts: 5107
Joined: Fri Feb 03, 2006 3:41 am
Location: Central Massachusetts

Re: Don't see many of these.....

Post by knifeaholic »

Mumbleypeg wrote:Thanks for looking, and for sharing your comments. Glenn, It has definitely seen a lot of use over the years (it is sway backed). It is definitely a conversation piece among those who look at my collection. Wish it could talk!

Steve, I would really appreciate anything you have about its age, and any pics from old catalogs, etc. My poorly educated guess is it dates from the 50's. BTW the pictures in Sargent's 7th edition (page 273) appear to have the captions reversed as to the age of the items, respectively. I have a couple of old Case catalogs that describe this a "counter hone". As you have said, the older ones have the round oil can, but the blue and white label like this one has seems to be newer, more modern graphic art, which is what leads me to think this one may be a transition version.

Thanks,
Ken
It may be an overused term when it comes to knives, but yes, yours is a "transition" - newer style graphics but round oil can.
Steve Pfeiffer, author of Collecting Case Knives: Identification and Price Guide published by Krause Publications.
knifeaholic
Gold Tier
Gold Tier
Posts: 5107
Joined: Fri Feb 03, 2006 3:41 am
Location: Central Massachusetts

Re: Don't see many of these.....

Post by knifeaholic »

From a 1930's catalog.
Attachments
Pages from Case Tested Catalog Orange Cover.jpg
Steve Pfeiffer, author of Collecting Case Knives: Identification and Price Guide published by Krause Publications.
knifeaholic
Gold Tier
Gold Tier
Posts: 5107
Joined: Fri Feb 03, 2006 3:41 am
Location: Central Massachusetts

Re: Don't see many of these.....

Post by knifeaholic »

From the 1974 catalog.
Attachments
Pages from Case Catalog #71-2.jpg
Steve Pfeiffer, author of Collecting Case Knives: Identification and Price Guide published by Krause Publications.
User avatar
Mumbleypeg
Gold Tier
Gold Tier
Posts: 13371
Joined: Fri Apr 18, 2014 1:28 am
Location: Republic of Texas

Re: Don't see many of these.....

Post by Mumbleypeg »

Thanks, Steve, for digging out these old catalogs and posting the pictures.

Treefarmer, it would be great to see it if you can get a picture. These old scenes of Americana need to be preserved.

Ken
Member AKTI, TSRA, NRA.

If your religion requires that you hate someone, you need a new religion.

When the people fear their government, that is tyranny. When government fears the people, that is freedom.

https://www.akti.org/
User avatar
steve99f
Posts: 2768
Joined: Mon Sep 16, 2013 9:49 pm
Location: Eastern PA

Re: Don't see many of these.....

Post by steve99f »

Seeing great things like this counter hone remind of us of what has been lost. Great item! Thanks for posting.
steve99f
User avatar
edge213
Gold Tier
Gold Tier
Posts: 7758
Joined: Sat Jan 25, 2014 12:48 am
Location: The Crossroads of America

Re: Sharpening Stones thread

Post by edge213 »

Pick this sharpening stone up in an antique shop yesterday. It's overall length is 4inches. I've never seen one like it before. Information?
Attachments
20140607_091138.jpg
David
"Glowing like the metal on the edge of a knife" Meat Loaf
Post Reply

Return to “Sharpening Forum”