Shop AAPK Stores by:

1st Generation Bulldog Brand Knives

First Generation Bulldog Brand knives were the first created. They were all made in the very popular Olbertz factory in Germany from 1978 to 1987. Knives of this generation have the fighting dog tang stamp & are the most valuable of the many Bulldog generations in general.

Check out some of the cool old knives made in the first generation below & be sure to stop by our store when you're finished to shop for Bulldog Brand knives.


BKC 10A Bulldog Gunstock KnifeBKC 10A
This is a 1981 3 blade Gunstock. This knife has the tangs stamped with the Fighting Dogs Stamp. Overall length of this knife is 3 1/2 inches. The master Spear Blade has the Pit-Bull Trademark etch and there is no Serial Number on it. The handles are Jigged Brown Bone with the Banner Shield and a Pinched Front Bolster. This is BKC 10-A, 1 of 1. This is an overrun of BKC 10.


Bulldog Gunstock Jack KnifeBulldog First Generation Serial Numbered Gunstock ~ Brown Bone
This is a 2 blade Gunstock. This knife has the tangs stamped with the Fighting Dogs Stamp. Overall length of this knife is 3 1/2 inches. The master Spey Blade has the Pit-Bull Trademark etch and there is no Serial Number on it. The handles are Jigged Brown Bone with the Banner Shield. This is BKC 14-B, 1 of a Few.


Bulldog Pitbull Trademark Gunstock Jack KnifeBulldog First Generation Serial Numbered Gunstock ~ Brown Bone

This is a 2 blade Gunstock. This knife has the tang stamped with the Fighting Dogs Stamp. Overall length of this knife is 3 1/2 inches. The master Spear Blade has the Pit-Bull Trademark etch and there is no Serial Number on it. The handles are Jigged Brown Bone with the Banner Shield. This is BKC 28, 1 of 18.


Bulldog BKC 32 Gunstock Stockman KnifeBKC 32
This is a 3 blade Gunstock Stockman. The master blade has the Pit-Bull Trademark etch. The tang is stamped with the Fighting Dogs Stamp on all tangs. Overall length of this knife is 3 3/4 inches closed. The handles are Genuine Stag with the Heart Shield. This knife is BKC 32. 300 knives were made in this configuration.


Bulldog Brand BKC 131 Stockman Knife4 Inch Stockman S & D Enterprises BKC 131
This is a 3 blade Premium Stockman. The master blade has the S & D Enterprises etch. The tang is stamped with the Fighting Dogs Stamp on all tangs. Overall length of this knife is 3 7/8 inches closed. The handles are Genuine Stag with the Crest Shield and Round Bolsters. This knife is number BKC 131, 1 of 310.


Bulldog BKC 102 Trapper KnifeBKC 102
This is a 4 1/8 inch Single Blade Trapper. This knife has the Fighting Pit-Bulls tang stamp. The single blade has a Trapper Jack etch. The handles are Brown Bone with a Crest shield. This knife is BKC 102, 1 of 60.


Bulldog BKC 150 Trapper KnifeBKC 150 Old Dominion Club 2 blade Trapper 1 of 300
This is a 4 1/8 inch 2 blade Trapper. This knife has the Fighting Dogs tang stamp. This is a Old Dominion Club Knife First Generation 2 Blade Trapper. The master blade has the Old Dominion Club etch with o51 engraved on the reverse. The handles are Genuine Stag with the ODKCA Bowtie Shield. This is BKC 150, 1 of 300, made in 1981. This has serial number 051.


Bulldog BKC 154 Gunstock Stockman KnifeBKC 154 Old Dominion Club
This is a 3 blade Gunstock Stockman. The master blade has the Old Dominion Knife Club etch. The tangs are stamped with the Fighting Dogs Stamp on all tangs. Overall length of this knife is 4 inches closed. The handles are Genuine Stag with the ODKCA Bomb Shield. This knife is Bulldog number BKC 154, 1 of 300. This is serial number 165.


Bulldog BKC 161-A Three Blade Dogleg Trapper KnifeBKC 161-A Old Dominion Club 3 Blade Trapper
This is a 3 7/8 inch New Style Dog-Leg frame 3 blade Trapper. The blades have the Fighting Dogs tang stamp. This is a Old Dominion Club Knife First Generation 3 Blade Trapper. The master blade has the Old Dominion Club etch. The handles are Genuine Stag with the ODKCA Acorn Shield. This is BKC 161-A, 1 of only a FEW were made in 1985. This is serial number 074. They made 300 torched Stag but only a few of these.


Bulldog Brand BKC 161-D Canoe KnifeBKC 161-D Old Dominion Club 3 Blade Canoe
This is a 3 5/8 inch 3 blade Canoe. The blades have the Fighting Dogs tang stamp. This is a Old Dominion Club Knife First Generation 3 Blade Canoe. The master blade has the Old Dominion Club etch. The handles are Genuine Stag with the ODKCA Acorn Shield. This is BKC 161-D, 1 of 236, made in 1986. This is serial number 028.


Bulldog Brand BKC 202 Trapper KnifeBKC 202 3 Blade Trapper
This is a 3 7/8 inch straight frame 3 blade Trapper. This knife features the Fighting Dogs tang stamp on razor sharp mirror polished drop forged steel blades. This is a Charlie Dorton designed First Generation 3 Blade Trapper. The master blade has the Pit-Bull Trademark etch. The handles are Genuine stag. This is BKC 202, 1 of 325.


Bulldog Sowbelly Stockman Knife1984 Kentucky Derby Sowbelly
This is a 3 3/8 inch closed Kentucky Derby Sowbelly also known as a Serpentine Stockman. This knife has the Fighting Dogs Tang Stamp. The master blade has the Kentucky Derby 1984, 110th Run For The Roses etch. The handles are Genuine Stag with a Horseshoe Shield that has a Horses Head. This knife commemorates the 100th running of the Kentucky Derby in 1984. This is BKC 257, 1 of 804. This is the largest production run of the First Generation.


Bulldog Single Blade Swobelly Jack Knife1987 Bluestripe Single Blade Odd Lot
This is a 1987 ODD LOT Knife, a 3 5/8 inch SINGLE BLADE Sowbelly also known as a Serpentine Stockman. This knife has the Fighting Dogs tang stamp. The master blade has NO etch. The handles are Bluestripe Celluloid with a Crest Shield and fancy Pinched Bolsters. This is BKC 411, 1 of 135 made. 1987 was the final year of the First Generation.


Bulldog Sowbelly Jack Knife1987 Red Sparkle 2 Blade Odd Lot
This is a 1987 ODD LOT Knife, a 3 5/8 inch 2 BLADE Sowbelly also known as a Serpentine Stockman. This knife has the Fighting Dogs tang stamp. The master blade has NO etch. The handles are Red Sparkle Celluloid with a Crest Shield and fancy Pinched Bolsters. This is BKC 412, 1 of 54 made. 1987 was the final year of the First Generation.


Bulldog Butter and Molasses Trapper Jack Knife4 1/8 Inch Butter and Molasses Trapper Jack
This is a 4 1/8 inch 2 Blade Trapper. This knife features the Fighting Pit-Bulls tang stamp. The master blade has a Trapper Jack etch. The handles are Butter and Molasses Celluloid with a Mountain Man shield. This knife is BKC 133 and 117 were made in this configuration.


Bulldog BKC 203 Trapper KnifeBKC 203 2 Blade Trapper
This is a 3 7/8 inch straight frame 2 blade Trapper. This knife has the Fighting Dogs tang stamp on razor sharp mirror polished drop forged steel blades. The master blade has the Pit-Bull Trademark etch. The handles are Genuine Stag. This is BKC 203, 1 of 330.


Bulldog BKC 338 Dogleg Trapper KnifeBulldog Brand Stag Dog Leg Trapper BKC 338
This is a First Generation 2 blade Dogleg Trapper (New Style). The master blade has the Old Reliable etch. The tang is stamped with the Fighting Dogs Stamp on all tangs. Overall length of this knife is 3 7/8 inches closed. The handles are Genuine Stag with the Acorn Shield. This knife is number BKC 338, 1 of 336.


Bulldog Lubberjack Moose KnifeBULLDOG 1983 Coon Stripe LUMBERJACK
This is a 2 blade Moose Pattern. The master blade has the Lumberjack etch. The tang is stamped with the Fighting Dogs Stamp on all tangs. Overall length of this knife is 4 inches closed. The handles are Coon Stripe celluloid with a Diamond Shied. This knife is number BKC 271. 288 knives were made in this configuration. You can tell this is a First Generation by the short pull on the master blade.


Bulldog Pit Bull Terrier Trapper KnifeBulldog 4 1/8 Inch Closed Genuine Stag Pit Bull Terrier Model Trapper
This is a Pit-Bull Terrier etched with Bulldog Brand Germany tang stamp.

It is a 4 1/8 inch closed Trapper. The tangs have the Bulldog Brand Germany tang stamp. The master blade has the "Pit Bull Terrier" etch. According to the factory this is the same blade etch used on the original BKC #49. These knives came from a overrun many years ago and were assembled as BKC #421 with 24 being made. The handles are Genuine Stag with a Crescent Shield. RARE KNIFE! 1 of 24.


Bulldog Brand BBK Prototype Stockman KnifeBulldog Brand Stock Knife
This is a 4 inch closed Bulldog Brand 3 Blade Stockman. This is one of the first Bulldog Brand Knife Prototypes; EVER. The tangs are unmarked except for the master blade, it has BBK for Bulldog Brand Knife Prototype. The reverse side is stamped with Solingen, Germany. The blades are a clip, sheepsfoot. and a spey. The master clip blade is deep etched with PREMIUM STOCK KNIFE and on the reverse is marked with BULLDOG BRAND PROTOTYPE, all is marked in CAPS! The handles are Brown Bone with a Large Crest Shield. This is an EXTREMELY RARE PROTOTYPE Knife! This was one of the first Bulldog Knives and made in the late 1970?s.


Bulldog Brand Cattle King Equal End Stockman KnifeCATTLE KING STAG knife ENGLISH STEEL 1985
This is a 3 blade Cattle King Equal End Stockman. The Master blade has the Cattle King etch. The tang is stamped with the Fighting Dogs Stamp on all tangs. Overall length of this knife is 4 1/4 inches closed. The handles are Genuine Stag with the Bowtie Shield. First Generation did not have Bulldog stamped in the center of the Bowtie Shield, Third Generation did. This knife is BKC 359. 300 knives were made in this configuration.


Bulldog Brand Cowboy's Pet Stockman KnifeBulldog Knife 4 inch Cowboy?s Pet Stag
This is a 3 blade Cowboy?s Pet Stockman. The Master blade has The Cowboy's Pet etch. The tang is stamped with the Fighting Dogs Stamp on all tangs. Overall length of this knife is 4 inches closed. The handles are Genuine Stag with the Spade Shield. This knife is number BKC 299. 400 knives were made in this configuration.


Bulldog Brand Single Blade Trapper KnifeBulldog Stag Single Blade Trapper
This is a 3 7/8 inch straight frame SINGLE BLADE Trapper. This knife has the Fighting Dogs tang stamp. The master blade has the Pit-Bull Trademark etch. The handles are Genuine Stag with a Banner Shield. This is a very RARE Knife, 1 of only 11 made in 1983. Reportedly it sat in Mr. Gronauers vault at the Friedrich Olbertz factory, unsold until 2004. One of the most RARE and unusual knives made in the First Generation.


Bulldog Brand Cattle King Equal End Stockman KnifeCATTLE KING Greenbone knife ENGLISH STEEL 1985
This is a 3 blade Cattle King Equal End Stockman. The master blade has the Cattle King etch. The tang is stamped with the Fighting Dogs Stamp on all tangs with English Steel 1985 stamped on the reverse of 1 tang. Overall length of this knife is 4 1/4 inches closed. The handles are Greenbone with the Bowtie Shield with pinched fancy Front Bolsters. First Generation did not have Bulldog stamped in the center of the Bowtie Shield, Third Generation did. This knife is BKC 360. 300 knives were made in this configuration.


Bulldog Brand BKC 72 Coal Miner Stockman KnifeCoal Miner Stockman
This is a 3 blade 3 3/4 inch closed Stockman. The master blade has The Coal Miners etch. The tang is stamped with the Fighting Dogs Stamp on all tangs. The handles are Brown Jigged Bone with the Banner Shield. This knife is BKC 72. JUST 6 knives were made in this configuration.


Bulldog Brand Cowboy's Pet Stockman KnifeCowboy's Pets
Here is a picture of 2 different styles of Cowboy's Pet 3 blade 4 inch closed Stockman. On both knives the master blade is etched with the Cowboy's Pet etch. Both are stamped with the Fighting Dogs Stamp on all tangs. The top knife is the slim line model and is much more rare. The bottom knife is the "regular" model and is built on a much thicker frame. Both have Genuine Stag handles with a Spade Shield. As noted in the descriptions of both knives, this is the only series in the First Generation to have stainless steel blades.


Bulldog Brand First Generation Trapper KnifeFirst Generation 4 1/8 Inch Blue Stripe Trapper Jack
This is a 4 1/8 inch 2 Blade Trapper. This knife features the Fighting Pit-Bulls tang stamp. The master blade has a Trapper Jack etch. The handles are Blue Stripe Celluloid with a Mountain Man shield. This knife is BKC 130 and 342 were made in this configuration.


Bulldog Brand Rabbit Hound Copperhead KnifeRabbit Hound Copperhead
This is a 3 3/4 inch closed 2 blade Copperhead. Fighting Dogs tang stamp on razor sharp mirror polished drop forged steel blades. The master blade is etched with the Rabbit Hound etch. The handles are Genuine Stag and a Heart Shield. This is BKC 294, 1 of 296 made.


Bulldog Brand Straight Frame Trapper KnifeS&D Trapper
This is a 3 7/8 inch straight frame 2 blade Trapper. This knife has the Fighting Dogs tang stamp on razor sharp mirror polished drop forged steel blades. The master blade has the S & D Enterprises etch. The handles are Genuine Stag with a crest shield. This is BKC 201, 1 of 180.


Bulldog Brand Gunstock Stockman KnifeSaddle Tramp
This is a 3 3/4 inch closed 3 blade Gunstock Stockman. The master blade has the Saddle Tramp etch. The tang is stamped with the Fighting Dogs Stamp on all tangs. The handles are Genuine Stag with the Heart Shield. This knife is BKC 31. 300 knives were made in this configuration.


Bulldog Brand Cowboy's Pet Stockman KnifeSlim-line Cowboys Pet
This is a 3 blade Cowboy?s Pet Stockman. The master blade has the Cowboy's Pet etch. The tang is stamped with the Fighting Dogs Stamp on all tangs. Overall length of this knife is 4 inches closed. The handles are Genuine Stag with the Spade Shield. This knife is the slim line version of the Cowboy?s Pet Stockman. The Cowboy?s Pet series is the only First Generation knives with Stainless steel.


Bulldog Brand 1st Generation Canoe Knife2 Blade Greenbone Canoe
This is a 3 5/8 inch 2 blade Canoe. All the blades have the Fighting Dogs tang stamp. The master blade has the Tobacco etch. The handles are Greenbone with the Tobacco Leaf Shield with Tobacco stamped inside. This is BKC 402, 1 of 298, made with 1986 English Steel Blades.


Bulldog Brand - Our Best - Canoe Knife2 Blade S&D Stag Our Best Canoe
This is a 3 5/8 inch 2 blade Canoe. All the blades have the Fighting Dogs tang stamp. The master blade has the S & D OUR BEST etch. The handles are Genuine Stag with the Crest Shield. This is BKC 400, 1 of 204, made with 1986 English Steel Blades.


Bulldog Brand Tobacco Etch Canoe Knife2 Blade Stag Canoe
This is a 3 5/8 inch 2 blade Canoe. All the blades have the Fighting Dogs tang stamp. The master blade has the Tobacco etch. The handles are Genuine Stag with the Tobacco Leaf Shield with Tobacco stamped inside. This is BKC 401, 1 of 224, made with 1986 English Steel Blades.


Bulldog Brand Three Blade Canoe Stockman Knife3 Blade Greenbone Canoe
This is a 3 5/8 inch 3 blade Canoe. All the blades have the Fighting Dogs tang stamp. The master blade has the Tobacco etch. The handles are Greenbone with the Tobacco Leaf Shield with Tobacco stamped inside. This is BKC 406, 1 of 294, made with 1986 English Steel Blades.


Bulldog Brand S&D Genuine Stag Canoe Knife3 Blade S&D Stag Our Best Canoe
This is a 3 5/8 inch 3 blade Canoe. All the blades have the Fighting Dogs tang stamp. The master blade has the S & D OUR BEST etch. The handles are Genuine Stag with the Crest Shield. This is BKC 404, 1 of 210, made with 1986 English Steel Blades.


Bulldog Brand Canoe Stock Knife3 Blade Stag Canoe
This is a 3 5/8 inch 3 blade Canoe. All the blades have the Fighting Dogs tang stamp. The master blade has the Tobacco etch. The handles are Genuine Stag with the Tobacco Leaf Shield with Tobacco stamped inside. This is BKC 405, 1 of 294, made with 1986 English Steel Blades.


Bulldog Brand Barlow KnifeBulldog First Generation Barlow Tobacco 2 Blade S&D ~ Green Bone
This is a 2 Blade Barlow. The tang is stamped with the Fighting Dogs Stamp with S & D Cut. Co. on the reverse side. Overall length of this knife is 3 1/2 inches. The master Sheepsfoot blade has S&D OUR BEST etched on it. The smaller blade has English Steel 1986. The handles are Greenbone and the bolsters have Tobacco written on them. If you look closely the handle of this knife looks upside down compared to the rest of the Bulldog Barlows. This knife is BKC 371, 1 of 148 made.


Bulldog Brand BKC 75 Congress KnifeBKC 75 Congress
This is a 4 blade 3 7/8 inch closed Congress. The master blade has the Tobacco etch a the back blade has the Pit-Bull Trademark etch. The two larger blades are both etched. The tang is stamped with the Fighting Dogs Stamp on all tangs. The handles are Genuine Pearl, full of color and there is NO Shield. This knife is BKC 75. 292 knives were made in this configuration.


BKC 171
This is a 4 blade 3 7/8 inch closed Congress. The master blade has the Tobacco etch and this is a part of the 3 7/8 4 Blade Congress 1983 Tobacco set. The tangs are stamped with the Fighting Dogs Stamp on all tangs. The handles are Genuine Stag, with a Bar Shield. This knife is BKC 171. 396 knives were made in this configuration.


Bulldog Brand BKC 176 Congress KnifeBKC 176 Congress
This is a 4 blade 3 7/8 inch closed Congress. The master blade has the Tobacco etch. The tang is stamped with the Fighting Dogs Stamp on all tangs and 1983 on the reverse of one. The handles are Dark Butter and Molasses and a Tobacco Leaf Shield. BKC 176 has fancy grooved bolsters. This knife is BKC 176. 381 knives were made in this configuration.


Bulldog Brand BKC 316 Congress KnifeBKC 316 4 Blade Congress
This is a 4 blade 3 5/8 inch closed Congress. The master blade has the Pit-Bull Trademark etch. The tang is stamped with the Fighting Dogs Stamp on all tangs and 1985 on the reverse of one. The handles are Greenbone and has a Spade Shield. This knife is BKC 316. 300 knives were made in this configuration.


Bulldog Brand BKC 330-A Congress KnifeBKC 330-A Congress
This is a 4 blade Tobacco Congress. The master blade has the Tobacco etch. The tang is stamped with the Fighting Dogs Stamp on all tangs. Overall length of this knife is 4 ? inches closed. The handles are End of Day Celluloid with the Tobacco Leaf Shield with Tobacco written inside. It also has fancy Pinched Bolsters. BKC 330-A. 36 knives were made in this configuration.


Bulldog Brand BKC 399 Tenneffee Barlow KnifeBKC 399 Tenneffee Barlow
This is a 2 blade Barlow. The tang is stamped with the Fighting Dogs Stamp. The smaller blade has English Steel 1986. Overall length of this knife is 3 1/2 inches. The Razor master blade has Tenneffee Burley etched on it. The handles are Genuine Stag and the bolsters have Tobacco on them. This is BKC 399, 1 of 96.


Bulldog Brand Virginia Barlow KnifeBright Leaf Virginia Barlow
This is a 2 Blade Barlow. The tang is stamped with the Fighting Dogs Stamp with Bulldog Hammer Forged on the reverse side. Overall length of this knife is 3 1/2 inches. The master Spey blade has Bright Leaf Virginia etched on it. The smaller blade has English Steel 1986. The handles are Greenbone and the bolsters have Tobacco written on them. This is BKC 395. This is 1 of 300 made.


Bulldog Brand Sowbelly TOBACCO SERIES KnifeBulldog Sowbelly TOBACCO SERIES Tennessee Etch
This is a BULLDOG 1984 SOWBELLY also called a Serpentine Stockman. This knife is a 3 blade 3 5/8 inches closed. Handles are Red Sparkle Celluloid with the Tobacco leaf shield. The master blade is etched with Tennessee Tobacco King, a flag and 3 Tobacco Leaves. Knife is dated 1984. BKC 285, 1 of 300.


Bulldog Brand Cut Plug 2 Blade Congress KnifeCut Plug 2 Blade Congress
This is a 2 blade 3 7/8 inch closed Congress. One blade has the Cut-Plug etch and the other has no etch. The tang is stamped with the Fighting Dogs Stamp on all tangs and 1983 on the reverse of one. The handles are Genuine Stag a Bar Shield. This knife is BKC 239. 300 knives were made in this configuration.


Bulldog Brand Sowbelly Stockman KnifeGeorgia Tobacco King
This is a 3 5/8 inch closed Sowbelly, also known by Bulldog as a Serpentine Stockman. The tang is stamped with the Fighting Dogs Stamp on all tangs. The master blade is etched with Georgia Tobacco King etch. The handles are Coon Stripe Celluloid with the Tobacco Leaf shield, with Tobacco written inside. This knife is part of the 3 5/8 inch Serpentine Stockman Tobacco set. BKC 287, 200 were made in this configuration.


Bulldog Brand Tobacco King Sowbelly Stock KnifeKentucky Tobacco King
This is a 3 5/8 inch closed Sowbelly, also known by Bulldog as a Serpentine Stockman. The tang is stamped with the Fighting Dogs Stamp on all tangs. The master blade is etched with Kentucky Tobacco King etch. The handles are Genuine Stag with the Tobacco Leaf shield, with Tobacco written inside. This knife is part of the 3 5/8 inch Serpentine Stockman Tobacco set. BKC 281, 400 were made in this configuration.


Bulldog Brand North Carolina Tobacco King KnifeNorth Carolina Tobacco King
This is a 3 5/8 inch closed Sowbelly, also known by Bulldog as a Serpentine Stockman. The tang is stamped with the Fighting Dogs Stamp on all tangs. The master blade is etched with North Carolina Tobacco King etch. The handles are Genuine Stag with the Tobacco Leaf shield, with Tobacco written inside. This knife is part of the 3 5/8 inch Serpentine Stockman Tobacco set. BKC 280, 400 were made in this configuration.


Bulldog Brand Ohio Tobacco King Sowbelly Stock KnifeOhio Tobacco King
This is a 3 5/8 inch closed Sowbelly, also known by Bulldog as a Serpentine Stockman. The tang is stamped with the Fighting Dogs Stamp on all tangs. The master blade is etched with Ohio Tobacco King etch. The handles are Genuine Stag with the Tobacco Leaf shield, with Tobacco written inside. This knife is part of the 3 5/8 inch Serpentine Stockman Tobacco set. BKC 279, 400 were made in this configuration.


Bulldog Brand Old Chum Congress KnifeOld Chum Chewing Tobacco
This is a 3 5/8 inch closed Congress. All blades have the Fighting Dogs Tang Stamp and the smaller blades are stamped 1983 on the reverse. The master blade is etched with the "Old Chum" etch. This knife has Genuine Stag handles with the Diamond Shield. This is BKC 213 and 336 were made in this configuration.


Bulldog Brand South Carolina Tobacco King Sowbelly Stock KnifeSouth Carolina Tobacco King
This is a 3 5/8 inch closed Sowbelly, also known by Bulldog as a Serpentine Stockman. The tang is stamped with the Fighting Dogs Stamp on all tangs. The master blade is etched with South Carolina Tobacco King etch. The handles are Gold Dust Celluloid with the Tobacco Leaf shield, with Tobacco written inside. This knife is part of the 3 5/8 inch Serpentine Stockman Tobacco set. BKC 286, 288 were made in this configuration.


Bulldog Brand Virginia Tobacco King Sowbelly Stockman KnifeVirginia Tobacco King
This is a 3 5/8 inch closed Sowbelly, also known by Bulldog as a Serpentine Stockman. The tang is stamped with the Fighting Dogs Stamp on all tangs. The master blade is etched with Virginia Tobacco King etch. The handles are Genuine Stag with the Tobacco Leaf shield, with Tobacco written inside. This knife is part of the 3 5/8 inch Serpentine Stockman Tobacco set. BKC 282, 400 were made in this configuration.


Bulldog Brand Barlow Tobacco Set KnifeBulldog First Generation Barlow Tobacco Set Fighting Dogs ~ Stag
This is a 2 blade Barlow. The tang is stamped with the Fighting Dogs Stamp. Overall length of this knife is 3 1/2 inches. The master blade has White Burley Ohio etched on it. The handles are Genuine Stag and the bolsters have Tobacco on them. This is BKC 393, 1 of 300.