This is a one of one knife. Larry Downing was a custom knifemaker based in Bremen, Kentucky who passed in 2025. 3.5 ounces. 9-1/4 inches overall. 5-3/4 inch blade. 1/8 inch thick. Made in USA....
35.6 ounces. 17-1/4 inches overall. 11-3/4 inch blade. 3/16 inch thick. Made in USA. Black Coated Steel blade and Trench handle. Green Nylon Cord Wrapped Grip. Guard etch: 5/01 1358. Grade...
Slim, portable, and holding up to five credit cards in the clip, this tool also contains a discreet 1.75 inch fine edge blade. Easily stored in your pocket and simple to deploy, this tool is...
Dennis has been making knives since 1972 and first learned about knife making from deceased legend Harvey Draper. Dennis is a voting member of the Knifemakers Guild and has won numerous awards,...
0.7 ounces. 3-1/8 inches overall. 1-1/2 inch blade. 1/16 inch thick. Made in Japan. Steel blade. Front blade etch: DROP FORGED PUSH KNIFE ; Rear blade etch: COLD STEEL 52100 High Carbon...
19.0 ounces. 14 inches overall. 8-5/8 inch blade. 1/8 inch thick. Made in China. Front Ricasso: TOMAHAWK ; Rear Ricasso: XL1452 Stainless Steel Handcrafted in China. Black coated Stainless Steel...
RARE LOW SERIAL NUMBER #008!!! Manufactured date is 5/30/1985. Potentially less than 1,000 of these were made by Manfred Sachse. 5.1 ounces. 10-1/8 inches overall. 5-1/8 inch blade. 1/4 inch...
Dennis has been making knives since 1972 and first learned about knife making from deceased legend Harvey Draper. Dennis is a voting member of the Knifemakers Guild and has won numerous awards,...
Limited Edition RMK 75th Anniversary (1938-2013) Astro #78 of 200. 11.0 ounces. 10-1/4 inches overall. 5-5/8 inch blade. 1/4 inch thick. Made in USA. Front Ricasso: (sword)RANDALL MADE...
Rare!!! This knife is the 3rd one made! 40.3 ounces. 16-1/2 inches overall. 11 inch blade. 1/4 inch thick. Made in USA. Front Ricasso: HIBBENKNIVES LA GRANGE, KY (Gil Hibben's signature)....
Rare!!! #192 of 350 made! 37.8 ounces. 17 inches overall. 11-3/4 inch blade. 5/16 inch thick. Made in USA. Stainless steel blade. Front Blade etch: HIBBENKNIVES LA GRANGE, KY (Gil Hibben's...
Rare!!! 1 of 50 made! 30.8 ounces. 15 inches overall. 8-5/8 inch blade. 5/16 inch thick. Made in USA. Stainless steel blade. Front Blade etch: 1 of 50 Celebrating 50 Years 1957-2007 (Gil Hibben's...
Rare!!! #3 of 3 made! This dagger designed by Dietmer Pohl that Gil made but he made an error. Dietmer wanted a groove in the blade and Gil thought it was a through and through grove. 17.2 ounces....
Mike Snody is a knifemaker who is known for his use of exotic materials in his custom knives. He began making Japanese-influenced fixed-blade knives in 1998 and branched out into other designs by...
Mike Snody is a knifemaker who is known for his use of exotic materials in his custom knives. He began making Japanese-influenced fixed-blade knives in 1998 and branched out into other designs by...
Mike Snody is a knifemaker who is known for his use of exotic materials in his custom knives. He began making Japanese-influenced fixed-blade knives in 1998 and branched out into other designs by...
Mike Snody is a knifemaker who is known for his use of exotic materials in his custom knives. He began making Japanese-influenced fixed-blade knives in 1998 and branched out into other designs by...
10.6 ounces. 8-1/8 inches overall. 5-inch blade. 1/4 inch thick. Made in Italy. Front tang: EXTREMA RATIO MADE IN ITALY ; Rear Tang: S.E.R.E. 1 CO2821. Black Powder Coated N690 Steel Blade. Black...
Limited Edition RMK 75th Anniversary (1938-2013) Astro #78 of 200. - br - - br - 11.0 ounces. 10-1/4 inches overall. 5-5/8 inch blade. 1/4 inch thick. Made in USA. Front Ricasso:...
The provenance of this knife is not 100 hundred percent clear but I believe that J.J. HIRSCHBERG was a distributor/retailer of MURRAY & GRAY Co. knives in the 19th century. - br - - br -...
Shiva Ki is a Louisiana knifemaker who makes sold his first knife in 1981. 8.0 ounces. 13-1/4 inches overall. 9 inch blade. 3/16 inch thick. Made in USA. Ivory & Kudu Horn handle....
Ron Gaston was one of the most prolific makers of custom knives, and a long time member of the Knife Makers Guild. He was one of the pioneers of the modern custom knife movement. He sold his first...
Ron Gaston was one of the most prolific makers of custom knives, and a long time member of the Knife Makers Guild. He was one of the pioneers of the modern custom knife movement. He sold his first...
1.9 ounces. 5-1/2 inches overall. 2-1/4 inch blade. 3/32 inch thick. Made in USA. Steel blade. Rear blade etch: F (3 stacked downward arrows) P. Ivory Micarta handle. with Black Leather Sheath (3...
0.7 ounces. 3-1/8 inches overall. 1-1/2 inch blade. 1/16 inch thick. Made in Japan. Steel blade. Front blade etch: URBAN PAL ; Rear blade etch: COLD STEEL MADE IN JAPAN. Black Kray-Ex...
Matthew Lesniewski is a Custom Knifemaker based in Galway, Upstate, New York. 16.6 ounces. 13 inches overall. 8-1/8 inch blade. 3/16 inch thick. Made in USA. 1095 Carbon Steel blade. Rear blade...
Very hard to find 2002 NICA (National Independent Cutlery Association) 4" tanto integral fixed blade. 7.2 ounces. 8-1/8 inches overall. 4-1/4 inch blade. 3/16 inch thick. Made in USA. Single...
Fixed-Blade Hunter. 9-1/4 inches Overall. 5 inch blade. Made in USA. "CASE XX USA" and "523-5 SSP" tang stamps. Stainless steel blades. Blade etched with blue scroll. Beautiful stag handle. Nickel...
30.7 ounces. 16 inches overall. 10 inch blade. 3/16 inch thick. Made in USA. Black Coated Steel blade and handle. Guard etch: 5/01 EDMF 1360. Grade A+: Unused Condition w/ Sheath. Never...
This collaboration between Ernie Emerson and Vaughn Neeley won "American Made Knife of the Year" at the 1995 Blade Show. 12.2 ounces. 11-7/8 inches overall. 6-1/2 inch blade. 3/16 inch thick. Made...
16.5 ounces. 12-1/8 inches overall. 7-1/8 inch blade. 1/4 inch thick. Made in USA. Front Ricasso: A.G. RUSSELL 2002 ; Rear Ricasso: AUS-8 MADE IN JAPAN. Stainless Steel blade. Rosewood handle....
Dennis has been making knives since 1972 and first learned about knife making from deceased legend Harvey Draper. Dennis is a voting member of the Knifemakers Guild and has won numerous awards,...
Francis Boyd is a Custom Knifemaker based in California. He is a trained sword smith having studied under Nakajima Muniyoshi. He is one of only a few Japanese trained sword smiths. 8.9...
21.9 ounces. 16-1/8 inches overall. 10-1/2 inch blade. 3/16 inch thick. Made in USA. Front Ricasso: SHINING MOUNTAINS BOWIE BLACKJACK 52-100 CARBON STEEL ; Rear Ricasso: EDGE DESIGN St Louis, MO....
9.5 ounces. 11-5/8 inches overall. 6-1/2 inch blade. 3/16 inch thick. Made in USA. Front Ricasso: (Fossil head) TIMBA ; Rear Ricasso: (butterfly BALI-SONG) Pacific Cutlery Japan. Stainless Steel...
4.2 ounces. 8-1/4 inches overall. 4-3/4 inch blade. 3/16 inch thick. Made in USA. Front Ricasso: (lion head) SAMSON ; Rear Ricasso: (butterfly BALI-SONG) Pacific Cutlery Japan. Stainless Steel...
Cary Thomas is a Custom Knifemaker based in Northern Idaho. 4.5 ounces. 7 inches overall. 3-5/8 inch blade. 1/8 inch thick. Made in USA. 8670 Tool Steel blade. Front blade stamp: CT. Stabilized...
3.0 ounces. 6-1/8 inches overall. 2-5/8 inch blade. 1/8 inch thick. File Worked Damascus Steel blade. Jasper & Gold Mother of Pearl handle. Grade A: Unused Condition, NO SHEATH w/...
Cary Thomas is a Custom Knifemaker based in Northern Idaho. 10.7 ounces. 12 inches overall. 7-1/8 inch blade. 1/8 inch thick. Made in USA. Front Ricasso stamp: CT. Mountain Scene etched 8670 Tool...
Craig Steketee began designing and crafting custom knives full-time as Stek Knives in 1991. He is a member of the Professional Knifemakers Association (PKA) and The American Bladesmith Society...
Bob 'RJY' Young is a custom knife maker that was based in Michican. He was a supervisor at the Marbles Factory in Gladstone, Michigan, before retiring and making his own knives. 11.9...
Matthew Lesniewski is a Custom Knifemaker based in Galway, Upstate, New York. 6.5 ounces. 9-1/4 inches overall. 4-5/8 inch blade. 1/8 inch thick. Made in USA. 1095 Carbon Steel blade. Rear blade...
8.8 ounces. 8-1/2 inches overall. 4-1/4 inch blade. 1/4 inch thick. Made in USA. Tiger Stripe Steel blade. Front blade etch: (logo) STRIDER. Black G10 handle. Grade: A+. Unused, in...
1.1 ounces. 3-5/8 inches overall. 1-7/8 inch blade. 3/32 inch thick. Made in France. Front tang: N690Co ; Front blade etch: Akeron & Bastinelli Logos combined. Black PVD Coated, Dark...
RD Nolen was a custom knifemaker from Texas who passed in 2010. 3.7 ounces. 8 inches overall. 3-7/8 inch blade. 1/8 inch thick. Made in USA. Steel blade. Front blade etch: NOLEN (NK) KNIVES....
The new Bark River Canadian Camp II knife is the latest addition to their Canadian Guide Series. It is the largest knife in the series and has been specifically designed and engineered for chores...