|
Guide to Case Knives
|
Case XX Patterns 16-30 |
[00-15] [16-30] [31-45] [46-60] [61-75] [76-90]
[91-105] [105-953] [Knives with no pattern
number]
|
| |
Pattern # 16
There are at least two knives that were manufactured with this pattern number.
One version is a 3 3/8 " jack knife that Case started producing sometime prior to 1915. Most of them have a clip, or spear master blade, along with a pen secondary. Most have no left side bolster, no shield, and almost all have bone handles. Case discontinued the knife in the late 1960's.
Another version was
introduced in the early 1960's. This one is a 3 1/2" knife known as a budding or grafting knife. They have a single spey blade, have no left side
bolsters, and I believe were only made with wood handles. Case discontinued this
knife sometime in the early 70's.
Search eBay for Jack Knives | Search Knife-Auction.com for Jack Knives
|
Pattern # 17
This knife is a 4" jack knife that is generally referred to as a half
hawk bill or loom fixer. They will normally have two blades that extend from the right side.
Most of them have a large sheepfoot master blade and a pen secondary blade. Case introduced the knives sometime before 1940. The handle materials used on this pattern include black composite, bone, and laminated wood. The black composite handled versions can be found from the pre 1950 era. All were made with laminated wood after 1970.
Search eBay for Loom Fixer Knives | Search Knife-Auction.com for Loom Fixer Knives
|
Pattern # 18
This pattern is a 3 1/2" serpentine style multi-bladed knife that is one of many that are referred to as
premium stock knives or stockman knives. This particular pattern is often referred
to as a medium, or junior stockman because of its size in relation to other
stockman knives. The blade combination used in this frame has been numerous. The master blade is almost always a clip
blade, while the others are usually a
sheepfoot and a spey. The pattern has also been produced with a pen
and/or punch blade in various combinations. I have also seen this knife with two clip blades extending from opposite ends. Knives of this nature are often known as small or mini muskrats. The 18 pattern is roughly the same size as the 32 pattern stockman, but its bolsters are
rounded rather than squared. It looks very similar to the 27, 87, and 47 pattern stockman
knives, but is larger than the 27 and 87, but smaller than the 47. These knives were introduced
sometime prior to 1940 and to my
knowledge
have been manufactured every year since.
More about Stockman knives | Price Guide | Search eBay for Stockman Knives | Search Knife-Auction.com for Stockman Knives
|
Pattern # 20
 This
is a 2 3/4" serpentine
style jack knife that almost all collectors call a peanut. They usually
have two blades, but some have been manufactured with one, and sometimes three or more. On recent versions, the master
blade will almost always be a clip blade, and the second (when there is one) will usually
be a pen blade, a small pair of scissors, or
a spey. Some older peanuts have a spear master blade. Peanuts with three or more blades are usually called big nuts. Case began making the pattern sometime
before 1915. The handle material used on peanuts manufactured from 1940 to 1980 include black composition, yellow composition, genuine stag, imitation pearl, cracked ice, bone, and delrin. Some older versions have a long pull or have a saber ground
master blade. Knives with either of these characteristic are generally
more valuable. A few have been built with no left-hand bolster. Some of these have a 0 before the 20.
More about Peanut knives | Price Guide | Search eBay for Peanut Knives | Search Knife-Auction.com for Peanut Knives
|
Pattern # 21
The oldest version of the 21 pattern is a 3 1/4 " whittler knife that W.R. Case & Sons started producing sometime prior to 1915. All of them that I have seen have a spear master blade, along with a pen blade and a short clip blade. I believe some have wharncliff master blades as well.
|
Pattern # 23
This knife is a 3 1/2 " coffin style jack knife. They have two blades; a spear and pen. The one pictured is a pre 1920 with goldstone celluloid handle scales : GS23.
Search eBay for Jack Knives | Search Knife-Auction.com for Jack Knives
|
Pattern # 24
This knife is a 3" jack knife that most collectors call regular jack or bare-head jack knives. They are two bladed knives that were manufactured with several blade configurations. Some have a spey master blade and a sheepfoot secondary. Some have a sheepfoot master, and a pen secondary. Others have a razor master and pen secondary. I believe they all have black composite handles and no shield. Case
produced this knife from sometime prior to1940 into the late 40's.
Search eBay for Jack Knives | Search Knife-Auction.com for Jack Knives
|
Pattern # 024
This knife is a 3" jack knife that most collectors call a regular jack or bare-head jack knife. They were
produced as both a single-bladed and double-bladed knife. The
single-bladed version has a clip blade, and most two blade versions have a clip master blade and a pen secondary blade. I don't believe that any of them have rear bolsters, or shields. Case has produced this knife from sometime prior to1940 to the late 60's. The handle material used on them includes bone and yellow composition.
Search eBay for Jack Knives | Search Knife-Auction.com for Jack Knives
|
|
Pattern # 0024
These knives are 3" swell end jack knives that are called Little John
Carvers. They have two blades that extend from the right side of the
knife. The master is a spey, and the second a coping blade. Case
began producing this knife sometime before 1940, and discontinued it sometime
before 1964. They came with a wooden carving block.
|
Pattern # 25
This is a 3" swell-center style jack knife that most collectors call
it a small coke bottle. They usually have a clip master blade, but older versions sometimes have a spear master, and a few pre 1964 25 patterns were made with a razor master blade. The
second blade will almost always be a pen. Some pre 1940 25 patterns were made
without left side bolsters. The pattern has been manufactured by Case since sometime prior to 1915.
Price Guide | Search eBay for Small Coke Bottle Knives | Search Knife-Auction.com for Small Coke Bottle Knives
|
Pattern # 26
This pattern was only manufactured by Case prior to 1940. It is a 3
" serpentine style jack knife that has two blades that both extend from the
front. The master blade will usually if not always be a clip and the second a pen blade.
|
Pattern # 27
Case manufactured at least three versions of the 27 pattern. Two have two blades and one has three.
The oldest version of the 27 pattern was a 3" congress style pen knife. They were only manufactured with two blades as far as I know.
The most recent two bladed version is a jack knife that measures 2 3/4" closed.
Most collectors call them baby or
small premium jack knives. I believe the master blade will always be a clip,
and the second a pen blade that both open from the same end, and each ride
on its own back spring. They were introduced by case sometime prior to 1940. .
More about Jack knives | Search eBay for Jack Knives | Search Knife-Auction.com for Jack Knives
|
|
The three bladed version is one of many knives known as a stock knife or stockman. It is among the smallest stockman knives,
measuring only 2 3/4". Because of this, it is often referred to as a baby premium stock
knife, or small stockman. This knife most often has a
clip master blade, along with a pen blade and sheepfoot blade. Case started making them sometime between 1940-1964.
More about Stockman knives | Price Guide | Search eBay for Stockman Knives | Search Knife-Auction.com for Stockman Knives
|
Pattern # 027
This pattern is a 2 3/4" pen knife that is most often referred to as a small or baby premium pen knife. They have been manufactured with both clip and spear master blades, and pen secondary blades. Case started making them sometime prior to 1915.
More about Pen knives | Search eBay for Pen Knives | Search Knife-Auction.com for Pen Knives
|
Pattern # 28
The 28 pattern is a 3 1/2" swell end style jack knife that usually has a spear and pen blade. Some of them have an easy open feature as well. Case started manufacturing them sometime prior to1940. They later changed the frame and added a 0 to the number.
|
Pattern # 028
Case has manufactured at least two distinct knives with this pattern number.
* The company's most recent version is a 3 1/2" serpentine style jack knife. Most have a clip and pen blade, and a 1/2 after the pattern number (when there is a pattern number). Some versions have been produced with a punch blade. Case discontinued them sometime
before 1964.
*The other 028 pattern is a teardrop style jack knife that was manufactured with a spear and clip blade. I'm not sure of the exact size, but they are considerably smaller than the other 028 pattern described above. |
Pattern # 29
This is a 2 1/2" swell-end jack knife that is often called a
tadpole. They have two blades that both extend from the right side. The
master is a clip, and the second a pen. I don't believe they were ever manufactured with left side
bolsters. Case began manufacturing them sometime before 1940 and ceased production in the
late 1960's.
Search eBay for Jack Knives | Search Knife-Auction.com for Jack Knives
|
Pattern # 30
This is a 3 1/4" equal end pen knife that most collectors call an equal end
pen. These knives have two blades that extend from opposite sides.
The master blade has been manufactured as both a clip and spear blade. The
second is always a pen. Case started making this pattern sometime before 1915 until sometime
prior to 1940.
Search eBay for Pen Knives | Search Knife-Auction.com for Pen Knives
|
|
[00-15] [16-30] [31-45]
[46-60] [61-75]
[76-90] [91-105] [105-953]
[Knives with no pattern number]
|
