Folk's, I have just  a super rare, Marbles Red Stag Bison carver knife to offer ya, made back in 2000 at the old Marbles factory in Gladstone, Mich. When Mike Stewart, now of Bark River knives headed the Marbles knife division from 1997-2002, they made some of the best knives in their 111 yr history !!!

This is the Marbles Red Stag Bison Carver

Knife is big, coming in at 9 3/8" OAL

Blade is 4 1/2" long, and is the old 52/100B high carbon that took a 1st, 2nd, and 5th place finish at the ABS sponsered World Championship Cutting Contest

Knife is very near mint condition.  The only issues on this knife is it has a couple of very little carbon spots along the blade edge near the tip that I think would polish out with semi-chrome

Blade is stamped : Marbles, Gladstone, Mi. USA. Off side is stamped 2000

Handle is 1 piece of truly gorgeous Red Stag. It has great roughed out Stag Bark and you can see the Red in it from end to end. Beautiful fancy Brass butt cap tops off the end

Knife comes to ya in the old Bobcat box with the Original Marbles leather sheath. Never used or carried and all the paperwork & inspection slip

Please supersize the pics on the next page for a close-up look at this rare Marbles beauty !!!

Folk's, except 1 knife, ALL the Marbles knives I have in my store right now were made between 1998-2002. These knives are ALL exceptional quality and are made to use for 30 yrs , then hand down to the next generation for use. With Marbles going out of business and filing chapter 7 on 9-23-09,  these knives will never be made again and I think will become very very sought after collector knives in the future !!!

  $195.00

Quantity:  

Wow folk's, I have a good un for ya here. Made back in 2000 at the old Marbles factory when Mike Stewart was heading their knife division. Some of the best knives were made in this era

This is the Marbles Buffalo/Buffalo fieldcraft

Knife is 7 1/2" OAL

Blade is 3 3/8" in length , Blade is the old 52/100B high carbon steel that took several 1st, 2nd, and 5th place finishes in the ABS sponsered World Cutting Championships

Blade is stamped : Marbles, Gladstone MI, USA on the front, and 2000 on the off side

Handles are Genuine Buffalo Horn as is the pommel. Rare combo here folk's in handle material to be Buffalo horn from end to end

NOTE !!!  The Buffalo horn handle has 3 app. 1 inch seasoning cracks in it. A few little spider marks around pommel. Handle is tight, no proplem, just wanted to let you all know of the cracks !!!  All natural material can develope these traits !!!

Comes to you new in the old Bobcat box, and has the Original Marbles leather sheath

Please supersize the pics on the next page for a close-up look at this very seldom seen knife !!!

  $150.00

Quantity:  

Got a great Marbles knife for ya here folk's. Made back in 2000 at the old Marbles factory when Mike Stewart was the head of their knife division. I feel this blade shape was one of Marbles most innovative ventures in there storied history

This is the Marbles Campcraft 2000 handled in thick, fat, Genuine Stag

Knife is 9 1/8" OAL

Blade is 4 3/8" in length

Blade is the old 52/100B carbon steel that took several prizes in the ABS sponsored World  Championship cutting contests

Blade is stamped: Marbles, Gladstone, Mi, USA on front and 2000 on the off side

Handle is a big fat thick piece of Genuine Stag with a really nice brass butt cap on the end

Comes to you in the old Bobcat box, with Original Marbles stamped leather sheath. The keeper strap button is also stamped Marbles

This is a bis heavy knife folk's, and you would not believe the feel in your hand no matter what way you hold it. This Mike Stewart era of Marbles knives were some of the best made knives that Marbles ever made in there entire history

Please supersize the pic on the next page for a close-up look at this very scarce knife. You can scour the web for one like this, it is ultra scarce

  $185.00

Quantity:  

Folk's, I got a very scarce Marbles knife here for ya, that was actually made back in 2000 at the old Marbles factory. Go ahead and search the internet for one folk's, this is a very scarce knife !!!

This is the Marbles Stag Sport Carver

It is a RW Loveless approved knife, and on the blade etch it reads: RW Loveless Approved, W.L. Marble. We all know how many 1000's of bucks the Loveless knives go for

Knife was made in 2000

Knife is 7 1/2" OAL

Blade is 3 5/8"

Handle is one piece of Genuine Stag, nice and fat and good feel in the hand

Blade is brushed finish and made of the old 52/100B high carbon steel which took 3 1st place, 1 2nd place and 1 5th place finish at the ABS sponsered World Cutting Championships. Its just a great drop point pattern. The old timers called it a willow leaf pattern. Blade thickness at the hilt is .217 thousands thick !!!

Blade is stamped: Marbles, Gladstone, MI, USA. In the football shape etch it says: RW Loveless Approved, W.L. Marble. Off side is stamped 2000

Comes to you with its Original Marbles stamped leather sheath in the old Bobcat box. Both the sheath and keeper strap are stamped: Marbles

Knife has never been used, carried, etc.

Please super size the pics on the next page for a close-up look

  $175.00

Quantity:  

Folk's, this is without a doubt, my personal favorite folding knife of all time !!! Folding Hunter 5165 pattern, Stag scales, and for what this knife represents.

When you read the blade etch: "The American Spirit" think about it. From our Independence in 1776 to the westward expansion of our country, to all the 100's of thousands of Americans that have gave their life for the USA.   NO other country in the world can ever match us in one in one catorgory that rises above all: "The American Spirit"

This is the Case XX 1976 Bicentennial Pocket Knife. The brass tag on the display base says this

Knife is 5 1/4" OAL closed, with a 3 3/4" blade

Blade is stamped: CASE XX Stainless over USA on the front, 5165 on the off side. Blade has a gorgeous bright Red & Blue etch that reads: The American Spirit

This is a serial numbered piece, this one has serial # 6441 on it.  10,000 were made in 1976

Scales are Genuine Stag, nice old yellow color on em, good roughed out stag bark, with some very nice deep grooves on the back side

Bolsters are "Engraved" very deep on all sides, with the front bolster having the 1776-1976 engraved also in it. I just Love these old Case knives with Engraved Bolsters. They really make it look like a fine piece of jewlry.

Comes with Original cherry wood display base, and Original glass top. Ya don't see to many of these offered with the Original glass top. Base still has the Original Case sticker on the bottom

Knife is Near Mint condition, never used, carried, etc. only set in in case. The stamp on the shield looks to be a little light right at the bottom of the circle around Case

Please Supersize the pics on the next page folk's. This knife and what it represents to me, is worth a look just for that !!!

  $276.00

Quantity:  

Folk's, I was lucky enough to get the remaining knives in stock of these Marbles Stag/Stag fieldcraft custom made hunters.

These knives were made in Gladsone, Mich. at the Marbles Custom Shoppe. Mr Shirley and Mr Hess, thanks to you for making such a fine knife. I am a Marbles collector and have been for 30 plus yrs. I am always looking for Marbles knives and you just do not see any of these knives anywhere for sale.

This is the Marbles Fieldcraft hunter. The knife has Marbles famous spacer system with stacked leather, Stag handle and Stag pommel. Marbles was the 1ST Knife Co. to bring the stacked leather handle into widespread use in the USA !!!  This Stag/Stag stacked leather combo is rare folk's !!!

Blade is stamped : Marbles over USA

Knife is 8" OAL with a 3 3/4" high carbon , brushed finished blade

Handles are Fat Stag, combined with stacked leather, spacers, and Stag pommel & both sides are pictured. Very unique custom made knife folk's

Comes New in box with a deep stamped Marbles oil tanned leather sheath with just a killer grain in the leather

This blade pattern folk's makes it a snap to field dress or skin any big game animal. This blade pattern in my opinion folk's, is one of the best ever made for all around big game chores !!!

Please supersize the pics for a closeup look of this gorgeous custom made Stag Marbles knife

These knives will never be made again with Marbles filing chapter 7 on 9/23/09

  $145.00

Quantity:  

Folk's, I have just a over the top beautiful set of custom made knives for ya here that would make a great addition to any ones knife collection

These knives were bought about 13 yrs ago down in the Ozarks in Missouri

They were made by Ken Richardson, yrs ago when he was using old tempered saw mill blades to make his knife blades from.

These knives are like new, never used or carried, only admired

This is a piggyback, twin finn type set of custom made knives

The large knife is 11 1/2" OAL with a 5 3/4" blade

The smaller knife is 8" OAL with a 3 1/8" blade

Both blades are made of old saw mill blades and have a beautiful "Jeweled" grind on the top portion of the blades which can easily be seen in the pics

Handles are beautiful "Crown Stag" with gorgeous buttons on the end. They have that candle dripping look to em that gives the ends just tons of character and are 1 of a kind

Both ends of the Crown Stag are polished and have a hand done scrimshaw done on em. One is of a Elk, the other of a Deer. Has the scrimshanders initials on them. You can see em real good in the pics.

The sheath is ultra thick leather and is hand tooled from top to bottom. Thick rawhide lacing binds it together, as do the heavy brass rivets.  It has the tip of a deer antler attached to the sheath. Holster type loop on top for very comfotable carry. It also has a rawhidw leg tie at the tip of the sheath. Very stiff and top notch made custom sheath.

With the Crown Stag, Custom sheath, Scrimshaw, this set of knives has so many collectible assets to it folk's, I truly believe this is an over the top set of knives. This is one I never thought I would part with, but age and other priorities, I am giving someone else a chance to own it

Please supersize the pics on the next page for a real close-up of this most special set of knives !!!

  $275.00

Quantity:  

Well folk's, I do not say rare to much on any of my knives, but this little baby here is just that, Rare !!!

I bought this knife many yrs ago from its Original Owner, a really good Ol fella from The Lone Star State that was set up at a knife show I went to in Tennessee. The pommel had dings in it and I got a lotta laughs as he told me the story of his grandson using it to bang on his bike pedal with.

This is a 1932-1940 Tested Era Case XX Stag 557 hunter

Knife is 6 7/8" OAL

Blade is 3 5/8"

Stag scales are gorgeous old yellow with great stag bark

Blade is stamped:Case w/ the long tail C underlining the whole CASE

The pommel is aluminum and has dings in it that should be visible in the pics

Blade is unused, but has some pitting on both sides. Also, some real fine spiderwebs on it, but retains most of its original finish

Comes with the Original old basketweave Case XX leather sheath, which has the longtail C, Case Tested XX stamp on the keeper strap button

I would say this knife grades Very Good condition at the least. Knife is tight from end to end and the sheath is also in wonderful shape

Please supersize the pics on the next page for a close-up of this great old Case 80 yr old knife !!!

  $185.00

Quantity:  

Folk's, I am gonna tell ya what I believe this Kodiak here is, then if anyone out there has a comment that seems to fit, I will add it to the description.

It has a small Case XX only stamp on the front and nothing on the off side. The stamp itself is consistent with the 1980 stamp. But, it has no dots. Bradley Wood, who covers Case fixed blades in the 6th edt. of Sargent's guide, talks of a small Case stamp in 1979 & a small stamp in the USA era. I believe this Kodiak to be a "transition" model between 1979 & 1980 and was stamped with the small Case stamp with the lightning S in the word Case, but no dots.

This is the Case Stag Kodiak hunter

Knife is 10 3/4" OAL

It has a 5 3/4" blade withthe Kodaik bear etch

Blade stamped: Case XX

The stag is thick & just gorgeous !!! Look at the side view of the Stag in the pics on the next page. The Stag has a curl in it just before the brass guard that just fits your hand oh so well

Comes to ya unused in the Case XX box, with its Original Case XX sheath like new

Please supersize the pics on the next page for a close-up look at this most unusual Kodiak

  $185.00

Quantity:  

Well folk's, here's a knife that was first patented in 1916 and then copied by almost every other knife company in the world, The Marbles Woodcraft

With the way this blade is shaped, it gives you the advantage of having a guttin & skinning blade all in one package

Knife has a great piece of fat stag for scales, all held together with Marbles famous spacer system

Knife is 8 3/4" OAL

Blade is 4 3/8" long, with the backspine being notched to prevent thumb slippage

Blade is stamped: Marbles USA, and this knife was made in the Marbles Custom Shop in Gladstone, Michigan

Rear pommel is aluminum

Comes with a stamped Marbles deep oil tanned leather sheath

Knife & Sheath come to ya New in Original Marbles box

  $129.99

Quantity:  

Here's a cool little Camillus lockback for ya folk's

It has the American Flag Stars & Stripes for scales

Knife is 3 1/4" closed

This knife is a Lockback

Blade is 2 1/8"

Blade is stamped Camillus U.S.A. New York

Blade also has the God Bless America blade etch

Knife is Near Mint condition, never used

This knife will ship insured, with Free Shipping

  $35.00

Quantity:  

I got a real special one for ya here folk's, and it is very scarce being 1 of 425 made with this blade etch in the world !!!

1500 of these were to be made in 1999 for the Fred Trost Pracital Sportsman show to support public television. They made 1000 of them with the shows logo & Fred's signiture on them. The run concluded with 425 more being made like this one

Dall DeWeese was a world reknown hunter from Canon City, Colorado that often hunted with Teddy Roosevelt. He contacted Webster Marble with what he thought would be the perfect design for a hunting knife, thus the Dall DeWeese pattern was developed

These were designed by master knife maker Mike Stewart, when he headed the Marbles knife division. He replicated the Original Dall DeWeese 1907 pattern in the handle, which has the Choil built into the wood slabs and tang. Check out the thickness of the scales, you have great control while using this knife !!!

Knife was made in 1999 & is stamped: Marbles, Gladstone, Mich. USA

OAL is 7 1/2" with a 4" blade

Blade is the old Marbles 52/100B High Carbon Ball Bearing Steel that will take on a razor edge. 52/100 steel knives took 3 1st, 1 2nd, and 1 5th finish in the ABS sponsored World Champion cutting contest

Scales are Cocobolo Wood with full exposed tang, and very thick. CoCobolo wood is the 2nd hardest wood in the world, and very durable

I have a really heavy leather rawhide laced sheath that you could cut down and retie that will fit this whole knife, handle and all. Snip it off and leave 2 holes to retie the rawhide.  I will ship you one of them with this knife.

Also comes in the old Marbles Bobcat box

When Mike Stewart was at Marbles folk's, they produced some of the best made knives in their storied histoy, and this is 1 of em. He currently runs Bark River Knives here in Michigan

The older Dall DeWeese knives are some of the most sought after by collectors. A Stag one like this from yrs past could fetch upwards of 1000 bucks. And these cocobolo scales on this knife are made identical to the old pattern, in thickness and size

Folk's, its my opinion that for a general purpose camp knife, guttin knife, and boneing knife if you process your own game as I do, you "Can Not" buy a better knife without going into the big buck customs, I put this knife in quality of steel, old 4 pin scales construction ahead of any other knife manufacturer in the USA for this price range

Please Supersize pics on the next page for a close-up look

NOTE: I have several of these knives availiable !!!  All knives are identical to this one, only difference is they have different serial numbers

  $85.00

Quantity:  

Here's the Marbles Plainsman Hunter folk's, and when it was made and what materials are in it, I would challenge ya to buy a better fixed blade hunter from any USA Knife Co. for 120 bucks that includes a quality leather sheath !!!

Knife was made back in 1999 in the old Marbles factory when Mike Stewart headed Marbles knife division. I truly believe from 1997-2002, Marbles made some of their best knives in their 111 yr history

Knife is 8 3/4" OAL with a 4 3/8" blade

Blade is 52/100 high carbon steel which took 3-1st, 1-2nd, 1-5th place finish in the ABS sponsored World Championship cutting contest

The blade thickness at the hilt is .213 thousands thick. Thats double most knives folk's, .045 thicker than Case's Kodiak !!!

Blade is stamped: Marbles, Gladstone, MI. USA

Scales are solid Curly Maple

Pommel is aluminum

Comes to ya New, in the old Marbles Bobcat box

Also has its Original stamped Marbles oil tanned leather sheath

Please supersize pics on next page for a close-up look

  $120.00

Quantity:  

I have just a great hunting knife for ya here folk's. And with the quality of steel, construction, I don't give a hoot what Knife Co. in the world you compare it too, for 120 bucks, you cannot buy a better one !!!

This is the Marbles Plainsman

Knife was made in 1999 at the old Marbles factory in Gladstone, Mich. when Mike Stewart headed their knife division

Knife is 8 3/4" OAL with a 4 3/8" blade

Scales are solid Birdseye Maple

Back pommel is aluminum

Blade is 52/100 high carbon steel, which took: 3-1st, 1-2nd, and 1-5th place finish in the ABS sposored World Championship cutting contest

Blade is .213 thousands thick at the hilt folk's, double most knives and .045 thicker than Case's Kodiak !!!

Blade is stamped: Marbles, Gladstone, Mi. USA

Comes to ya New in Original Marbles old Bobcat box

Also has Original Marbles stamped oil tanned leather sheath

Please supersize the pics on the next page for a close-up look

  $120.00

Quantity:  

Folk's, here's a knife that is sure enough to please the deer hunter or Stag fixed blade collector

This is the Case XX "Deer Hunter" scaled in Genuine Stag

Knife is 6 3/4" OAL with a 3 1/4" blade

Blade is stamped: CASE XX with 4 X's on the front, and 524-3 1/4 SS on the off side. Blade has a neat color blade etch of a big buck and says: Deer Hunter on it. Blade shape is a Drop Point, my personal favorite for hunting chores

Genuine Stag 1 piece scales are very nice in color, texture, and thickness

Knife comes to ya new in metal collectors tin

Also has the Original Case XX flap over sheath which fits right into the display tin

Please supersize pics on the next page for a close-up look at this really pretty drop point Deer Hunter

  $89.99

Quantity:  

Here's a really nice Case XX gift set for the bird hunter/collector folk's

This is the Case XX 523-3 1/4 Stag bird knife

Knife is 6 3/4" OAL with a 3 3/4" blade

Blade is stamped: CASE XX with 4 X's on the front side, and 523-3 1/4 SS on the off side. Also has a 3 color blade etch of a pheasant on it

Scales are Genuine 1 piece Stag with good color and texture to them. Also has a brass butt cap on the end. See the pics on the next page for a look at the front and the back and thickness

Comes to ya new in a Case XX collectors tin with its Original Case XX sheath

Please supersize the pics on the next page for a good close-up look !!!

  $79.99

Quantity:  

Well, here's the story on this one folk's. I bought this knife somewhere around 8-9 yrs ago. I sharpened it 1 time and put it in with my pile of hunting gear. I was gonna bring it along in case someone at camp needed an extra. Well, there it set, lost at the bottom of all my junk till I got to cleaning the other day and ran across it

This is a BEAR MGC Stag Hunter

Knife is 8 1/8" OAL

Blade is 3 3/4" in length and stamped: BEAR MGC USA between 2 dots (1998)

Stag scales are very very nice !!! Nice Color and nice roughed out stag bark on both sides, and good thickness to them

Fully exposed tang construction, these older BEAR MGC fixed blade knives are under rated folk's. Made in Jacksonville, Alabama, USA

Comes with Original sheath that has the BEAR MGC stamp in it. It has a small slit on the top side, does not affect function, but its there. Yes, I did that to it myself, (DUH)

Knife is Near Mint condition, sharpened once, but never used

Please supersize pics on the next page for a close-up look

  $55.00

Quantity:  

Well here ya go boys & girls, this knife is, and has been for many years the Flagship fixed blade pattern in the W R Case & Sons lineup

This is the Case XX Kodiak Hunter scaled in beautiful Genuine Stag. The Stag is a rich dark color and just has very nice character on both sides which are pictured

Knife is stamped Case XX with the long tail C over 3 dots over Kodiak

This knife has 3 dots, but the box says 10-07-98 so its 1997 or 1998

Blade is 5 3/4" long with the classic Kodiak Bear etch, OAL is 10 1/2"

Comes to ya New in original Case box, with original Case Kodiak high quality leather deep oil tanned leather sheath, never sharpened or used

These Kodiak's are very comfortable in the hand, and also great feeling in the hand with the big brass finger guard while dressing big game

Please supersize the pics on the next page for a close-up look at this knife !!!

  $164.99

Quantity:  

Well folk's, here is one knife pattern that is as far as I am concerned, is the most famous and reckonized fixed blade knife of all time, The Ideal

Introduced by Webster Marble in 1901, this knife literaly took America by storm. It led the Marbles Corp. to phenomenal success.

This version of the Ideal came out about 7-10 yrs ago, and was pretty much discontinued after Marbles was sold to new ownership around 2003

This is the Marbles Ideal with the Cocobolo Gamegetter handle. You cannot believe how comfortable this knife is in the hand, any way you hold it

Knife is 9" OAL with a 4 1/4" blade.

Blade is stanped Marbles, has a very big blood groove on both sides, and is made of High Carbon steel, as you can see in the pics, brushed finish

Handle is genuine Cocobolo Wood, 2nd only to ironwood in hardwood density, and ultra durable. This is just simply one of the best designs for comfort in your hand that I have ever felt

Comes with a gorgeous Original Marbles deep oil tan leather "flap over" sheath with a built in internal cut guard so the blade does not touch the leather, also very comfortable to wear and total knife protection

The whole package comes to ya new, in Original Marbles box. This knife was made in Gladstone, Michigan, where they were made since 1898 !!!

Please supersize the pics on next page for a close-up look at this famous knife pattern

  $99.99

Quantity:  

Folk's, here is (5) five bowie style leather sheaths for sale. They would be great for a big knife that you could use in period Mtn. Man type reinactments

Sheaths are app. 11" in length by 3 1/8" wide

You could also cut these sheaths down in length and leave yourself 2 holes to retie the rawhide to hold a whole knife, handle and all

Leather is ultra thick and you could use some oil on em to soften em up a bit

They are stitched together with rawhide lacing

See the supersize pics on the next page for a front and back look at em

5 of these sheaths weigh in at 1.4 lbs, but they are still coming to ya for Less than 2 bucks a piece shipped !!!

NOTE: They have a very slight musty smell from being stored in a basement or something. A little oil and air would take care of it I believe, thus the lower price on em !!!

  $6.00

Quantity:  

page 1    2