Folk's, I have just  a super rare, Marbles Red Stag Bison carver knife to offer ya, made back in 2000 at the old Marbles factory in Gladstone, Mich. When Mike Stewart, now of Bark River knives headed the Marbles knife division from 1997-2002, they made some of the best knives in their 111 yr history !!!

This is the Marbles Red Stag Bison Carver

Knife is big, coming in at 9 3/8" OAL

Blade is 4 1/2" long, and is the old 52/100B high carbon that took a 1st, 2nd, and 5th place finish at the ABS sponsered World Championship Cutting Contest

Knife is very near mint condition.  The only issues on this knife is it has a couple of very little carbon spots along the blade edge near the tip that I think would polish out with semi-chrome

Blade is stamped : Marbles, Gladstone, Mi. USA. Off side is stamped 2000

Handle is 1 piece of truly gorgeous Red Stag. It has great roughed out Stag Bark and you can see the Red in it from end to end. Beautiful fancy Brass butt cap tops off the end

Knife comes to ya in the old Bobcat box with the Original Marbles leather sheath. Never used or carried and all the paperwork & inspection slip

Please supersize the pics on the next page for a close-up look at this rare Marbles beauty !!!

Folk's, except 1 knife, ALL the Marbles knives I have in my store right now were made between 1998-2002. These knives are ALL exceptional quality and are made to use for 30 yrs , then hand down to the next generation for use. With Marbles going out of business and filing chapter 7 on 9-23-09,  these knives will never be made again and I think will become very very sought after collector knives in the future !!!

  $195.00

Quantity:  

Wow folk's, I have a good un for ya here. Made back in 2000 at the old Marbles factory when Mike Stewart was heading their knife division. Some of the best knives were made in this era

This is the Marbles Buffalo/Buffalo fieldcraft

Knife is 7 1/2" OAL

Blade is 3 3/8" in length , Blade is the old 52/100B high carbon steel that took several 1st, 2nd, and 5th place finishes in the ABS sponsered World Cutting Championships

Blade is stamped : Marbles, Gladstone MI, USA on the front, and 2000 on the off side

Handles are Genuine Buffalo Horn as is the pommel. Rare combo here folk's in handle material to be Buffalo horn from end to end

NOTE !!!  The Buffalo horn handle has 3 app. 1 inch seasoning cracks in it. A few little spider marks around pommel. Handle is tight, no proplem, just wanted to let you all know of the cracks !!!  All natural material can develope these traits !!!

Comes to you new in the old Bobcat box, and has the Original Marbles leather sheath

Please supersize the pics on the next page for a close-up look at this very seldom seen knife !!!

  $150.00

Quantity:  

Got a great Marbles knife for ya here folk's. Made back in 2000 at the old Marbles factory when Mike Stewart was the head of their knife division. I feel this blade shape was one of Marbles most innovative ventures in there storied history

This is the Marbles Campcraft 2000 handled in thick, fat, Genuine Stag

Knife is 9 1/8" OAL

Blade is 4 3/8" in length

Blade is the old 52/100B carbon steel that took several prizes in the ABS sponsored World  Championship cutting contests

Blade is stamped: Marbles, Gladstone, Mi, USA on front and 2000 on the off side

Handle is a big fat thick piece of Genuine Stag with a really nice brass butt cap on the end

Comes to you in the old Bobcat box, with Original Marbles stamped leather sheath. The keeper strap button is also stamped Marbles

This is a bis heavy knife folk's, and you would not believe the feel in your hand no matter what way you hold it. This Mike Stewart era of Marbles knives were some of the best made knives that Marbles ever made in there entire history

Please supersize the pic on the next page for a close-up look at this very scarce knife. You can scour the web for one like this, it is ultra scarce

  $185.00

Quantity:  

Folk's, I got a very scarce Marbles knife here for ya, that was actually made back in 2000 at the old Marbles factory. Go ahead and search the internet for one folk's, this is a very scarce knife !!!

This is the Marbles Stag Sport Carver

It is a RW Loveless approved knife, and on the blade etch it reads: RW Loveless Approved, W.L. Marble. We all know how many 1000's of bucks the Loveless knives go for

Knife was made in 2000

Knife is 7 1/2" OAL

Blade is 3 5/8"

Handle is one piece of Genuine Stag, nice and fat and good feel in the hand

Blade is brushed finish and made of the old 52/100B high carbon steel which took 3 1st place, 1 2nd place and 1 5th place finish at the ABS sponsered World Cutting Championships. Its just a great drop point pattern. The old timers called it a willow leaf pattern. Blade thickness at the hilt is .217 thousands thick !!!

Blade is stamped: Marbles, Gladstone, MI, USA. In the football shape etch it says: RW Loveless Approved, W.L. Marble. Off side is stamped 2000

Comes to you with its Original Marbles stamped leather sheath in the old Bobcat box. Both the sheath and keeper strap are stamped: Marbles

Knife has never been used, carried, etc.

Please super size the pics on the next page for a close-up look

  $175.00

Quantity:  

Folk's, I was lucky enough to get the remaining knives in stock of these Marbles Stag/Stag fieldcraft custom made hunters.

These knives were made in Gladsone, Mich. at the Marbles Custom Shoppe. Mr Shirley and Mr Hess, thanks to you for making such a fine knife. I am a Marbles collector and have been for 30 plus yrs. I am always looking for Marbles knives and you just do not see any of these knives anywhere for sale.

This is the Marbles Fieldcraft hunter. The knife has Marbles famous spacer system with stacked leather, Stag handle and Stag pommel. Marbles was the 1ST Knife Co. to bring the stacked leather handle into widespread use in the USA !!!  This Stag/Stag stacked leather combo is rare folk's !!!

Blade is stamped : Marbles over USA

Knife is 8" OAL with a 3 3/4" high carbon , brushed finished blade

Handles are Fat Stag, combined with stacked leather, spacers, and Stag pommel & both sides are pictured. Very unique custom made knife folk's

Comes New in box with a deep stamped Marbles oil tanned leather sheath with just a killer grain in the leather

This blade pattern folk's makes it a snap to field dress or skin any big game animal. This blade pattern in my opinion folk's, is one of the best ever made for all around big game chores !!!

Please supersize the pics for a closeup look of this gorgeous custom made Stag Marbles knife

These knives will never be made again with Marbles filing chapter 7 on 9/23/09

  $145.00

Quantity:  

Well folk's, here's a knife that was first patented in 1916 and then copied by almost every other knife company in the world, The Marbles Woodcraft

With the way this blade is shaped, it gives you the advantage of having a guttin & skinning blade all in one package

Knife has a great piece of fat stag for scales, all held together with Marbles famous spacer system

Knife is 8 3/4" OAL

Blade is 4 3/8" long, with the backspine being notched to prevent thumb slippage

Blade is stamped: Marbles USA, and this knife was made in the Marbles Custom Shop in Gladstone, Michigan

Rear pommel is aluminum

Comes with a stamped Marbles deep oil tanned leather sheath

Knife & Sheath come to ya New in Original Marbles box

  $129.99

Quantity:  

I got a real special one for ya here folk's, and it is very scarce being 1 of 425 made with this blade etch in the world !!!

1500 of these were to be made in 1999 for the Fred Trost Pracital Sportsman show to support public television. They made 1000 of them with the shows logo & Fred's signiture on them. The run concluded with 425 more being made like this one

Dall DeWeese was a world reknown hunter from Canon City, Colorado that often hunted with Teddy Roosevelt. He contacted Webster Marble with what he thought would be the perfect design for a hunting knife, thus the Dall DeWeese pattern was developed

These were designed by master knife maker Mike Stewart, when he headed the Marbles knife division. He replicated the Original Dall DeWeese 1907 pattern in the handle, which has the Choil built into the wood slabs and tang. Check out the thickness of the scales, you have great control while using this knife !!!

Knife was made in 1999 & is stamped: Marbles, Gladstone, Mich. USA

OAL is 7 1/2" with a 4" blade

Blade is the old Marbles 52/100B High Carbon Ball Bearing Steel that will take on a razor edge. 52/100 steel knives took 3 1st, 1 2nd, and 1 5th finish in the ABS sponsored World Champion cutting contest

Scales are Cocobolo Wood with full exposed tang, and very thick. CoCobolo wood is the 2nd hardest wood in the world, and very durable

I have a really heavy leather rawhide laced sheath that you could cut down and retie that will fit this whole knife, handle and all. Snip it off and leave 2 holes to retie the rawhide.  I will ship you one of them with this knife.

Also comes in the old Marbles Bobcat box

When Mike Stewart was at Marbles folk's, they produced some of the best made knives in their storied histoy, and this is 1 of em. He currently runs Bark River Knives here in Michigan

The older Dall DeWeese knives are some of the most sought after by collectors. A Stag one like this from yrs past could fetch upwards of 1000 bucks. And these cocobolo scales on this knife are made identical to the old pattern, in thickness and size

Folk's, its my opinion that for a general purpose camp knife, guttin knife, and boneing knife if you process your own game as I do, you "Can Not" buy a better knife without going into the big buck customs, I put this knife in quality of steel, old 4 pin scales construction ahead of any other knife manufacturer in the USA for this price range

Please Supersize pics on the next page for a close-up look

NOTE: I have several of these knives availiable !!!  All knives are identical to this one, only difference is they have different serial numbers

  $85.00

Quantity:  

Here's the Marbles Plainsman Hunter folk's, and when it was made and what materials are in it, I would challenge ya to buy a better fixed blade hunter from any USA Knife Co. for 120 bucks that includes a quality leather sheath !!!

Knife was made back in 1999 in the old Marbles factory when Mike Stewart headed Marbles knife division. I truly believe from 1997-2002, Marbles made some of their best knives in their 111 yr history

Knife is 8 3/4" OAL with a 4 3/8" blade

Blade is 52/100 high carbon steel which took 3-1st, 1-2nd, 1-5th place finish in the ABS sponsored World Championship cutting contest

The blade thickness at the hilt is .213 thousands thick. Thats double most knives folk's, .045 thicker than Case's Kodiak !!!

Blade is stamped: Marbles, Gladstone, MI. USA

Scales are solid Curly Maple

Pommel is aluminum

Comes to ya New, in the old Marbles Bobcat box

Also has its Original stamped Marbles oil tanned leather sheath

Please supersize pics on next page for a close-up look

  $120.00

Quantity:  

I have just a great hunting knife for ya here folk's. And with the quality of steel, construction, I don't give a hoot what Knife Co. in the world you compare it too, for 120 bucks, you cannot buy a better one !!!

This is the Marbles Plainsman

Knife was made in 1999 at the old Marbles factory in Gladstone, Mich. when Mike Stewart headed their knife division

Knife is 8 3/4" OAL with a 4 3/8" blade

Scales are solid Birdseye Maple

Back pommel is aluminum

Blade is 52/100 high carbon steel, which took: 3-1st, 1-2nd, and 1-5th place finish in the ABS sposored World Championship cutting contest

Blade is .213 thousands thick at the hilt folk's, double most knives and .045 thicker than Case's Kodiak !!!

Blade is stamped: Marbles, Gladstone, Mi. USA

Comes to ya New in Original Marbles old Bobcat box

Also has Original Marbles stamped oil tanned leather sheath

Please supersize the pics on the next page for a close-up look

  $120.00

Quantity:  

Well folk's, here is one knife pattern that is as far as I am concerned, is the most famous and reckonized fixed blade knife of all time, The Ideal

Introduced by Webster Marble in 1901, this knife literaly took America by storm. It led the Marbles Corp. to phenomenal success.

This version of the Ideal came out about 7-10 yrs ago, and was pretty much discontinued after Marbles was sold to new ownership around 2003

This is the Marbles Ideal with the Cocobolo Gamegetter handle. You cannot believe how comfortable this knife is in the hand, any way you hold it

Knife is 9" OAL with a 4 1/4" blade.

Blade is stanped Marbles, has a very big blood groove on both sides, and is made of High Carbon steel, as you can see in the pics, brushed finish

Handle is genuine Cocobolo Wood, 2nd only to ironwood in hardwood density, and ultra durable. This is just simply one of the best designs for comfort in your hand that I have ever felt

Comes with a gorgeous Original Marbles deep oil tan leather "flap over" sheath with a built in internal cut guard so the blade does not touch the leather, also very comfortable to wear and total knife protection

The whole package comes to ya new, in Original Marbles box. This knife was made in Gladstone, Michigan, where they were made since 1898 !!!

Please supersize the pics on next page for a close-up look at this famous knife pattern

  $99.99

Quantity:  

Folk's, I got just a Dandy hunting knife for Y'all here, coming to ya from an American knife company that been around for well over 100 yrs. And priced  below 100 bucks, with a handle shape that just will blow ya away when you get it in your hand

This is the Marbles Plainsman, made in Gladstone, Michigan, USA. They made knives here in Michigan since 1898 !!!

Knife is 9 1/8" OAL with a 4 3/4" blade

Compare the thickness of this blade right at the hilt to a Case XX Kodiak. The Kodiak is .175 thick, this Marbles Plainsman is is .180 thick. Nice heavy blade , yet lightweight with the wood handles

The handle is just gorgeous Cocobolo wood with a killer grain in it, (see pics)

CoCobolo is the 2nd hardest wood in the world, and ultra durable. Comes mainly from Costa Rica, and will grow in value with its scarcity

It is designed so well , rather you are holding it in a defensive postion, or you have it turned upside down with your thumb against the brass guard as you would to dress out a big game animal, it is just flat out, ultra comfortable

Blade is stamped Marbles as is the deep oil tanned Original sheath

Comes to ya new in the original Marbles box

If memory serves me right, this knife was made around 2002-2003 at the latest

Please supersize the pics on the next page for a closeup look at this great American hunting knife

  $90.00

Quantity:  

Folk's, if you are lookin to purchase a high quality American hunting knife without the custom knife price, boy do I have a dandy one for ya here

This has been in storage for 6 yrs and going from the brass guard back spacer sequence of black,brass,red,white,red,brass,black, I presume this to be about a 5 - 6 yr old knife, made in 2002 - 2003. Thats a good thing, as I believe Marbles was still using the old high carbon steel, and you can tell when you hold this one it is sharp and will take on a scary edge

This is the Marbles Plainsman Pattern fixed blade hunter

This knife was made in Gladstone, Michigan, USA

It is scaled in gorgeous genuine Autumn-Red Bone and both sides are pictured on the next page The bone is a nicer color red, but the sun don't shine here in Michigan during the winter, so it is not showing up. Also at the top and bottom, the bone has a beautiful goldish color to it, thus the Autumn-Red Bone

Knife is 9" OAL with a high carbon 4 1/4" blade with the Marbles stamp

Comes to ya New in Original Marbles box, with the Original deep oil tanned Marbles leather sheath with the Marbles stamp in it. It also has the internal cut guard that protects cutting the sheath and keeps the blade from touching the leather

Please scroll down and supersize the pics on next the page

Folk's, its of my opinion that for around 100 bucks, you just cannot get a better well made American hunting knife that you can use and then hand it down to the next generation for service !!!

  $120.00

Quantity:  

Marbles filed chapter 7 and this knife is long gone, never being made again 

Here's one of the most famous Marbles knives ever made !!!

This is the Marbles Woodcraft scaled in Genuine Stag end to end including the butt cap. This pattern was first pattened in 1916

Knife is 8 3/4" OAL with a 4 1/2" blade. Thick back spine, grooved on top to prevent thumb slippage

Stamped MARBLES on the front. This knife was made in Gladstone, Michigan USA

This knife was made in 2003 and has been in storage

Comes to ya with Original stamped Marbles leather sheath, new in box with paperwork

This pattern Marbles Woodcraft is truly a piece of American Cutlery History !!!

  $135.00

Quantity: