Here is one (1) pair of large Stag knife scales for knife making

These Stag scales are a great color and have real nice roughed out bark on both pieces

These scales are a good size and I believe would fit a large folder or fixed blade knife

Scales measure 3 1/2" in length, 1 1/4" wide, and are about 3/8" thick on the ends

I know nothing about knife making, but I was a machinist and have a pair of dial calipers. If you need to know the exact measurements anywhere on these scales to see if they would work for you, I could measure them in thousands (.000) Just give me a holler

Supersize pics on next page for a close-up look

  $25.00

Quantity:  

Got a real nice Case XX Stag 523-5 hunter for ya here folk's, thats just been setting in storage for about 12 years waitin for a new owner

This is a Case XX 523-5 hunter that has the full roll, 1 piece Stag handle on it

Knife is 9 1/4" OAL with a 5" blade. The backspine of the blade has the notches on top to prevent thumb slippage while using the knife

Knife is stamped Case XX over USA with 5 dots on the front side, and 523-5 SS on the off side. This knife was made in 1995

Stag handle is the 1 piece roll stag, with very nice color and roughed out bark on it, and is very thick (see pics)

Has the brass finger guard and brass butt cap on it

Comes to ya New in the Original Case box, and with the Original Case oil tanned "flap over" leather sheath. I really like the design of these sheaths, as they protect the knife from the weather, hold it securely, and are comfortable to wear on your belt

Please supersize the pics on the next page for a close-up of this Stag Hunter

  $113.00

Quantity:  

Here's just a cool little knife folk's, from the innovative folk's at Spyderco

This knife was Spyderco's FIRST non-locking folder they ever made. This knife has been discontinued for some time now, and I have not saw any on ebay for a while

This is the Spyderco - Pride - C72, non-locking slip joint folder

Knife is 3 1/2" closed

Blade is 2 1/2 in length. Blade is made of AUS-6 stainless steel. Blade is stamped: SPYDERCO AUS-6 STAINLESS on the front side and SEKI-CITY JAPAN on the off side

Knife has the half stop opening-closing postion, and is hollow ground with a nice big thumb hole pull for easy opening

Handles are silver finished aluminum, and have "The American Flag" inlayed into the handle

Has stainless steel pocket clip mounted for tip down carry.

I picked this up at a show several yrs ago after the seller told me it was the 1st knife they made that was not a locking knife, plus I loved the flag inlay in the handles. He also told me because of the blade length, non-locking feature, it was Legal to carry in more countries in the world than any knife he knew of

Comes to ya new in original Spyderco box and papers

Please supersize the pics on the next page for a close-up look at this unique little knife

  $55.00

Quantity:  

Folk's, I got just a Dandy hunting knife for Y'all here, coming to ya from an American knife company that been around for well over 100 yrs. And priced  below 100 bucks, with a handle shape that just will blow ya away when you get it in your hand

This is the Marbles Plainsman, made in Gladstone, Michigan, USA. They made knives here in Michigan since 1898 !!!

Knife is 9 1/8" OAL with a 4 3/4" blade

Compare the thickness of this blade right at the hilt to a Case XX Kodiak. The Kodiak is .175 thick, this Marbles Plainsman is is .180 thick. Nice heavy blade , yet lightweight with the wood handles

The handle is just gorgeous Cocobolo wood with a killer grain in it, (see pics)

CoCobolo is the 2nd hardest wood in the world, and ultra durable. Comes mainly from Costa Rica, and will grow in value with its scarcity

It is designed so well , rather you are holding it in a defensive postion, or you have it turned upside down with your thumb against the brass guard as you would to dress out a big game animal, it is just flat out, ultra comfortable

Blade is stamped Marbles as is the deep oil tanned Original sheath

Comes to ya new in the original Marbles box

If memory serves me right, this knife was made around 2002-2003 at the latest

Please supersize the pics on the next page for a closeup look at this great American hunting knife

  $90.00

Quantity:  

Folk's, I have just a gorgeous customized knife for ya here from the world famous David Yellowhorse

This is the 1998 3rd edition in the Silver Series from David Yellowhorse titled "Sacred Buffalo"

This knife is dedicated to what was the most important part of the Native American plains tribes culture:The Buffalo.The Sioux and Cheyenne were often refered to as a Buffalo Culture. They depended on the buffalo to sustain a total way of life. Food, shelter, clothing, weapons, cooking utensials, everything came from this incredible animal. The Lakota Sioux name for the buffalo was P'tay.I am sure that they as a nation appreciate it very much that David Yellowhorse chose to make a knife to honor The Sacred Buffalo

Knife is 3 1/4" closed with a 2 1/4" blade

Scales are made of .925 sterling silver with a total weight of 1 troy ounce

They are adorned on "both sides" with turquoise, black jet, and orange spiney oyster stones. There is a Buffalo in the middle and "both" sides are finished the same way

Blade etch has the famous David Yellowhorse horse head logo, as well as an etch of his signiture.This knife also has the D Y tang stamp

This is a serial numbered piece, this one being # 2357. One (1) of 2500 made

Comes to you in the original display box and a Certificate Of Authenticity, "See Pics"

"NOTE" It cannot be seen in the pics, but the black jet stone on the right on the front of the knife is chipped out and most of it is missing. Its hard to tell even in your hand, so take this into account

  $105.00

Quantity:  

Folk's, if you are lookin to purchase a high quality American hunting knife without the custom knife price, boy do I have a dandy one for ya here

This has been in storage for 6 yrs and going from the brass guard back spacer sequence of black,brass,red,white,red,brass,black, I presume this to be about a 5 - 6 yr old knife, made in 2002 - 2003. Thats a good thing, as I believe Marbles was still using the old high carbon steel, and you can tell when you hold this one it is sharp and will take on a scary edge

This is the Marbles Plainsman Pattern fixed blade hunter

This knife was made in Gladstone, Michigan, USA

It is scaled in gorgeous genuine Autumn-Red Bone and both sides are pictured on the next page The bone is a nicer color red, but the sun don't shine here in Michigan during the winter, so it is not showing up. Also at the top and bottom, the bone has a beautiful goldish color to it, thus the Autumn-Red Bone

Knife is 9" OAL with a high carbon 4 1/4" blade with the Marbles stamp

Comes to ya New in Original Marbles box, with the Original deep oil tanned Marbles leather sheath with the Marbles stamp in it. It also has the internal cut guard that protects cutting the sheath and keeps the blade from touching the leather

Please scroll down and supersize the pics on next the page

Folk's, its of my opinion that for around 100 bucks, you just cannot get a better well made American hunting knife that you can use and then hand it down to the next generation for service !!!

  $120.00

Quantity:  

Here's a great little time tested Case pattern for your pocket folk's

This is a Case XX 5220 2 blade Stag peanut

Knife is 2 3/4" in closed position

Has real nice burnt Stag scales on both sides which are pictured

Made in 2002 and comes to ya new in the original Case box with papers

Great little pattern Case has had for yrs and ya hardly know its in your pocket

  $55.00

Quantity:  

Here's a real nice 30 yr old Case Stag fixed blade for ya folk's

This is a Case XX Stag 1978 523-5 Razor Edge fixed blade hunter

Knife is stamped CASE XX over USA on the front side, and 523-5 SSP on the off side

Knife is near mint condition, never carried or sharpened, unused

Knife is 9 1/4" OAL with a 5" blade. Blade has the grooves on top of backspine to prevent thumb slippage

Stag scales are thick, (see pics) and extremely well matched on this knife folk's. Nice roughed out bark and texture on both sides

Comes to ya with Original Case XX stamped leather sheath that has retained its original color and is in really nice shape

Please supersize the pics on next page for a good closeup at one of Case's old classic pattern hunters

  $154.99

Quantity:  

Here's a really unique folding knife set up for ya folk's, and its in Stag !!!

This is the W R Case & Sons Case XX changer knife. This is a big heavy folder folk's, and the large brass bolsters compliment the Stag scales nicely

It is 4 3/4" in the closed position

It has 4 blades that are changeable to suit any need that may arise. All the blades have the long knife pull except the fillet blade

Main blade is 3 1/2" long, drop point is 3 3/4", saw blade is 3 1/2" and fillet blade is 3 1/2" All blades are stamped Case XX over USA, XX Changer with 5 X's and 4 dots

Scales are Genuine Stag, have really nice color & are thick with nice roughed out bark on both sides. Front scale has a fine line seasoning check in it, no biggie but its there

Comes with new Original Changer sheath that holds the knife and all 4 blades securely, sorry, no box

If ya got stuck out in the woods or mountains folk's, this would be a great knife to have strapped on your belt that could handle several survival needs all in 1 package !!!

  $114.99

Quantity:  

I have a really unique knife & sheath set for ya here folk's

I have had this several yrs and as I remember, the fella I bought it from said it was made in the 1950's. Don't know if that is 100% true, but thats the info I got. I been lookin on ebay for 2-3 months for one and have yet to find one, so I do not think they are very plentiful

This is a Mora Fish knife. Handle is wood and is carved in a fish head on both sides

Knife is 8 1/2" OAL with a 4" blade

Blade is stamped: MORA, Made in Sweden, with a C over an A marking on it

Sheath is custom made of leather and sewn & painted in the shape of a fish, looks like a trout to me, very cool !!!

Knife looks to have Never been used or sharpened, near mint shape, as is the sheath with only a few little scuffs on a couple of the fins

Have not ever saw but 1 other of these in all my yrs of knife huntin, and it was only 6" long. Sure to please the trout / fly fishermen who has it all

Supersize the pics on next page for a closer look

  $99.99

Quantity:  

Folk's, I have an item here that does not have a blade in it, but most definatly is knife related in handle material, Natural Stag

I picked up 5 sets of these several yrs ago from a fella that bought the Elk sheds at the big sale they have every year in Jackson Hole, Wyoming

This is the last set that I have

These are Elk Stag salt & pepper shakers

They are very good size salt & pepper shakers : 4 1/8" tall, by 2" across at the bottom

Scroll down and take a good close up look on the next page at the top where the holes are, and the bottom where they are corked for re-filling

  $20.00

Quantity:  

Folk's, I do not usually sell imported knives. I try to stick with USA only. But being a fixed blade lover, when I saw these I just had to pick up a couple sets. They would be a great set for the hunter, so you did not booger up your good knives, or for a young lad or lass just gettin into hunting

This is a really cool set of Rough Rider knives and they are imported from china

Both knives are full tang construction, have stainless steel blades, resin impregnated wood handles, stainless steel pins

The skinner is 8 1/2" OAL and the smaller knife is 7 1/2" OAL. You have all you need to gut, skin, and cut up a large game animal such as deer, etc. They also come "very sharp" and are ready to go into the field for chores right now

Handles have a cool brass shield shaped like the old long rifles of the 1750-1850 period. Both knives also have a blade etch that says Long Rifle

Both knives come and fit into a really thick leather double sheath for carrying. The heavy duty strap on the back snaps loose so you do not have to undue your belt to put the sheath on it, real nice feature

Knives and Sheath come to you new in the Long Rifle box

All in all, I have to admit, I was very pleased with the workmenship in this set for the money. It is the Only imported knives I have offered, and I think it is a really cool hunting set, scroll down on the next page and see the pics and decide for yourself

  $40.00

Quantity:  

Here's a neat little piece to throw in your car, truck, or RV that mite get ya out of a jam sometime

This is a Multi- Tool piece that came from Cabela's

It consists of a pair of plyers, small knife blade, screwdriver, wood saw, and bottle opener

Also has a bright LED light in it, it would give ya enough lite to change a tire in the dark, I know that

Also comes with the batteries and a nylon belt sheath with the Cabela's logo on it

Supersize the pics on next page for a closeup look

  $9.99

Quantity:  

Marbles filed chapter 7 and this knife is long gone, never being made again 

Here's one of the most famous Marbles knives ever made !!!

This is the Marbles Woodcraft scaled in Genuine Stag end to end including the butt cap. This pattern was first pattened in 1916

Knife is 8 3/4" OAL with a 4 1/2" blade. Thick back spine, grooved on top to prevent thumb slippage

Stamped MARBLES on the front. This knife was made in Gladstone, Michigan USA

This knife was made in 2003 and has been in storage

Comes to ya with Original stamped Marbles leather sheath, new in box with paperwork

This pattern Marbles Woodcraft is truly a piece of American Cutlery History !!!

  $135.00

Quantity:  

I have a couple of spare gun holster's so I figured I would put these in the store as knives & guns seem to go real well together

This is a brand new Uncle Mike's courdura nylon "Sidekick" holster. Nice padding and real stiff. Has extra mag pouch with velcro strap

It is size #1 (one) and fits auto's with a 3" to 4" barrel

Has the belt and boot clip for different carry positions

I do not know exactly what Brands of guns it fits, so you might have to do a little research there

Made in USA & very nice quality

  $14.99

Quantity:  

Well folk's, here is the perfect gift set for the Lady knifer. Would make a great gift for Mother's Day, Anniversary, Birthday, etc.

This is a Case XX 678-3 1/2 pink Bubba Gum bone slabside hunter

Stamped Case XX with 4 X's on front, 678-3 1/2 SS over USA on the off side

Knife is 7" OAL with a 3 1/2" blade

Blade is nicely etched "Lady Case" as is the top grain leather sheath on the front

Also along for the ride is a matching pink "Lady Case" hat that is adjustable for all sizes. Hat is "All" material, no mesh

The knife, and hat are all "Brand New" and make a very nice matching pink package for the lady knifer

NOTE: DOES NOT INCLUDE SHIRT, NEW PICS TO COME !!! Please supersize the pics for a close look !!!

Shipping is $6.95 including insurance

  $94.99

Quantity:  

Here's a dandy Case commemortive for ya folk's. Its a Case XX full size burnt bone trapper hailing the 1898-1920 Alaska Gold Rush

Knife is stamped Case XX USA, 5254 SS. Has the old Case bomb sheild with the block CASE stamped in it. 4 1/8" OAL

Has real 24k blade etch on both blades. Super size these pics on next page to see the detail of this unique blade etch !!!

Comes with a vial of pure 24k gold flakes, very cool presentation piece here folk's.

All this in a clamshell box with Certificate of Authenticity !!!

This is a stamped serial number piece, stamped 091 on front bolster

Shipping is $5.95 W/ Confirmation

  $129.99

Quantity:  

This is a Case XX Kodiak pattern fixed blade hunter, handled in Genuine Buffalo Horn

Knife is 10 1/2" OAL with a 5 7/8" blade. Blade has a Kodiak bear etched into it

Knife is Mint in original box with original leather sheath and papers

Now this is just my opinion. But being that fixed blade knives make up 70% of my entire knife collection, I have had more than a few in my hands over the years. I believe that as production knives go, the Case Kodiak Hunter handled in Buffalo or STAG is the best feeling, handleing fixed blade you can get a grip on for dressing and general purpose carry

I have been hearing for a year or two that Buffalo Horn could follow Stag as an Embargoed material. If that were to happen, this would be an extra nice piece to have put up !!!

Please click on pics for Larger image

Shipping is $6.95 including insurance

  $139.99

Quantity:  

Folk's, this is a really neat presentation Tin WR Case & Sons came up with for this Russlock

This Case XX red bone russlock comes with this collectors tin. It has all the old Case tang stamps embossed on the outside of the tin, see pics, Very unique!

Knife is 6 1/4 inches open with a 3 inch blade. Beautiful corncob jigging on the red bone scales.

Knife comes MINT as shown in original W.R.Case & Sons collectors tin.

PLEASE CLICK ON PICS FOR LARGER IMAGE

Shipping is $6.95 including insurance

  $60.00

Quantity:  

page 1   2