MAKER: PAL BLADE CO.
PATTERN: Jackknife
CLOSED LENGTH: 3 inches
HANDLES: Celluloid
BLADES: Spear and pen blades, carbon steel
BOLSTERS: Nickel Silver
LINERS: Brass
TANG STAMPS: PAL BLADE CO. (in arch)/MADE/IN U.S.A.
CONDITION: Good
DAMAGE: Some pocket wear & dings to bolsters. Both springs are weak. Some pitting on the blades.
AGE: 1940-1945
COUNTRY OF ORIGIN: USA
BLADE WEAR: There is quite a bit of blade wear on this knife.
SHIELD: none
SNAP: Pretty weak
BLADE ETCH: none


ADDITIONAL INFO:
This is a beautiful old knife from around the time of WWII. The PAL BLADE CO. stamp as only used from 1940 to 1945 According to Goin’s. As you may know, during the War, most knife production went toward the war effort. This knife is unique in the regard that it seems to have been produced for the Civilian market. It is a beautiful knife that has obviously seen it’s fair share of work. While it still has plenty of life in it, I think it will make a fine addition to someone’s collection where it can set there and look pretty.

  $35.00

Quantity:  

MAKER: J.A. Henckels
PATTERN: Jack
CLOSED LENGTH: 3 inches
HANDLES: Appear to be celluloid
BLADES: Swedge ground clip blade and pen blade, with half stops.
BOLSTERS: Nickel Silver
LINERS: Nickel Silver
TANG STAMPS: Twin Logo/J.A. HENCKELS/GERMANY. Both blades have the same tang stamp.
CONDITION: Good
DAMAGE: Some pocket wear. Staining on blades.
AGE: Not sure, but I believe it is prior to 1960 when Hneckels stopped making their own pocket knives.
COUNTRY OF ORIGIN: Germany
BLADE WEAR: Both appear to be full.
SHIELD: Oval
SNAP: Good for master blade. Very little for pen blade. Pen blade is tight and may have snap if it loosens.
BLADE ETCH: None


ADDITIONAL INFO:
I am not positive as to the date of manufacture on this knife. I believe it to be prior to about 1960 when Henckels stopped making their own pocketknives and started having others make them. This knife appears to be of a much style than the newer knives I have seen with the Henckels name on them.

  $45.00

Quantity:  

MAKER: Case
PATTERN: 9233
CLOSED LENGTH: 2-5/8 inches
HANDLES: Imitation Pearl
BLADES: Clip & pen blades. Appear to be carbon steel with patina.
BOLSTERS: nickel silver
LINERS: Appear to be nickel silver
TANG STAMPS: CASE XX/U.S.S./.....
CONDITION: Knife has been used. I would call the condition good
DAMAGE: Pen blade sits a pit proud and is stiff with no snap.
AGE: 1975
COUNTRY OF ORIGIN: USA
BLADE WEAR: Has been sharpened. Clip blade I think as about 95%.
SHIELD:
SNAP: Good snap for master blade. None for pen blade.


ADDITIONAL INFO:
I know very little about Case knives. I am thankful for all the info about Case here on the AAPK Research Section, or else I would know next to nothing about this knife. Look at the pics and read my description, such as it is. If you are not happy with the I will refund the purchase price.

  $35.00

Quantity:  

Here is one of the hardest to find of the newer Schrade Old Timer models. It was made only for about a year and sold exclusively by Wal-Mart. With black Delrin handles and brass bolsters this one of the prettiest Old Timers ever made. To top it off Schrade coated the blades with titanium nitrate to give it a unique look. Unfortunately someone has used this knife. The blades appear to be full, but do show some scratches on them from use.
************************************************************
Length - 3-5/16”
Construction – Single backspringSwinden Key construction.
Blades -Titanium nitrate coated clip & pen blades of Schrade + steel
Handles – Black Delrin
Bolsters & Liners – Brass
Shield – Unique X Timer brass shield
Made in the U.S.A.

  $24.95

Quantity:  

MAKER: Camillus
PATTERN: TL-29/Electricuan’s Knife
CLOSED LENGTH: 3-3/4 inches
HANDLES: Black Delrin
BLADES: Carbon steel spear master and screwdriver/wire stripper blades. Master blade appears to still have the factory edge.
BOLSTERS: Nickel Silver
LINERS: Brass
TANG STAMPS: CAMCO (arched)/USA
MECHANISM: Slipjoing with liner lock for secondary blade.
CONDITION: Very Good
DAMAGE: Some pitting on the spine of the main blade. Minot scuffs to handles & bolsters. It looks more like it sat in a drawer than rode in a pocket.
AGE: Est. 25 years or older.
COUNTRY OF ORIGIN: USA
BLADE WEAR: Master blade appears 100%. Secondary is full.
SHIELD: None
SNAP: Very strong on both blade. Half stops on both blades.


ADDITIONAL INFO:
This is an excellent example of a typical Mil-Spec type TL-29. Since it has the CAMCO tang stamp as opposed to the Camillus stamp, it is a more difficult knife to find. While not mint, this knife is in very good to excellent condition. It is suitable for display in a collection or to carry everyday and use as a tool.

  $24.95

Quantity:  

MAKER: Schrade
PATTERN: Stockman
CLOSED LENGTH: 2-3/4 inches
HANDLES: Saw cut Delrin.
BLADES: Clip master, sheepfoot & spey blades of 1095 carbon steel.
BOLSTERS: Nickel Silver
LINERS: Brass
TANG STAMPS: SCHRADE/U.S.A.108OT
CONDITION: good user
DAMAGE: Mostly cosmetic and some staining of carbon steel blades.
AGE: Could have been made between 1973 and 2004. I would guess it to have been made in the early 1990s.
COUNTRY OF ORIGIN: USA
BLADE WEAR: Blades have been sharpened, but not heavily. Little blade wear.
SHIELD: Old Timer shield. No etch.
SNAP: Good
LAST KNOWN MSRP: $31.45 in 2004


ADDITIONAL INFO:
Here is a chance for you to have a good user American made knife, for the price of a cheap knife made offshore! This knife is in good enough condition it could even be used in a display. All this for less than half the price they sold for new, just 5 years ago!

  $15.00

Quantity:  

MAKER: Pal Cutlery Co.
PATTERN: Camper
CLOSED LENGTH: 3-3/4 inches
BOLSTERS: Steel
LINERS: Steel
HANDLES: Jigged composite
TANG STAMPS: PAL CUTLERY CO. (in an arch)/MADE/IN U.S.A.
CONDITION: Good
DAMAGE: Some pitting on main blade and can opener. Very little shrinkage if handles. Minor pitting of bolsters.
AGE: 1945-1953
COUNTRY OF ORIGIN: USA
BLADE WEAR: Little wear. Has been sharpened. Blade 95%+
HALF STOPS: Solid half stops an all blades except the punch.
SNAP: Strong snap on all blades with a bit less on the punch owing to the lack of half stop in that blade.


ADDITIONAL INFO:
This old knife is in remarkably good condition considering it is at least 56 years old and has steel liners and bolsters. I had to buff this knife to stop the active surface rust. It snaps like a bear trap on all blades except the punch, which still has a strong snap (just not a bear trap). There is some pitting on the main blade but it is not too bad. Most of these knives I find are badly rusted and pitted and most have about 50% of the main blade left. This knife is the happy exception to that rule.

  $49.95

Quantity:  

MAKER: Craftsman, made by Camillus
PATTERN: Dog Leg Jack
CLOSED LENGTH: 2-13/16 inches
HANDLES: Laminated Hardwood
TANG STAMPS: CRAFTSMAN/U.S.A./95236
CONDITION: New old stock in box with papers
DAMAGE: None noted on knife, some wear to the box
COUNTRY OF ORIGIN: USA
BLADE WEAR: None
SHIELD & BLADE ETCH: None
SNAP: Excellent


ADDITIONAL INFO: This knife is new old stock from the Camillus sale of 2007. These knives are new in the box with Craftsman sharpening instructions, Care and Use instructions and Craftsman Warranty. The person I bought these from thought Schrade made them. However, when I got them and examined them I could see the pin-through-bolster construction indicative of Camillus. Schrade knives were made with the Swinden Key system, and this knife is obviously not made with the Swinden Key. This is an excellent knife for pocket or display.

Price $19.95

  $19.95

Quantity:  

This handy tool is one I make patterned after a tool that came from the Camillus cutlery factory after they closed. At Camillus they referred to this tool as a "knife vise." This tool is used to compress the backsprings of a slip joint so you can reassemble the knife much easier, without needing three hands. I have a tutorial on how to use this tool posted at: http://www.allaboutpocketknives.com/knife_forum/viewtopic.php?f=38&t=10069 The tutorial has far more pictures than I can post on this listing. It also explains how to use the tool.

  $20.00

Quantity:  

Here is an 897UH, Uncle Henry, stockman pattern for sale. The knife is new old stock. It is still sealed in the clampack in which it left the factory. Included in the clampack is a Free Collector’s Pin for the International Hunter’s Education Association. Included in the clampack are the paperwork for the knife and the Uncle Henry Registration Form for the One Year Loss Replacement Policy. Also included is paper having to do with the International Hunter Education Association, along with the IHEA pin. The knife itself appears to be in mint condition, though the there are a few rub marks on the outside of the plastic clampack, possibly due to poor storage or from shipping. The graphic on the cardboard in the clampack would seem to indicate that it was packaged circa 2001-2002. This is an excellent knife to use or display. It can even be displayed in the clampack. A great addition to any collection. ~ ~ ~ ~ New old stock, still sealed in the clampack ~ ~ ~ ~ *** Made in USA.***

  $55.00

Quantity:  

This is a 5-inch Browning lock back. It has brass bolsters and what appears to be Rosewood handles. This knife is used but the blade is very full. The blade is carbon steel with patina. An excellent user knife or a nice addition to one's collection. ~~~~~~~~~~GREAT FATHER'S DAY PRESENT~~~~~~~~~~

  $45.00

Quantity:  

Liner Action 2415STX 3-5/8" Liner Lock, partial serration Kershaw Liner Action, new in clampack with paperwork & Kershaw Limited Lifetime Warranty. This knife is extremely lightweight and incredibly sharp. In my personal opinion this is not the knife for heavy-duty “grunt” work, but a knife that is made for someone who needs a daily use knife that is extremely sharp. ~~~~NEW IN CLAMPACK~~~~ SPECIFICATIONS: - Blade Length- 2-7/8" (Partially Serrated Edge) - Blade Steel- AUS6A - OAL Closed- 3.75" - OAL Open 6-3/4” - Handles Die-Cast Aluminum Handle with Non-Slip Co-Polymer Inserts - Weight 2 ounces Features: - Removable Pocket Clip - Liner Lock - Thumb Stud for easy One-Handed opening & closing - MSRP $62.95 This knife is still factory sealed in the clampack. The pictures of the knife out of the package are pictures of the same model knife that did not come in the clam pack.

  $25.95

Quantity:  

Schrade Uncle Henry LB-5 Smokey. Brand new old stock without box. SPECIFICATIONS: - Blade Steel- Schrade + stainless - Handles are resin impregnated wood - Liner Brass - Bolsters Brass - Blade Length- 2-1/2” - OAL Closed- 3-3/4” - OAL Open 6-1/2” – The last year these were manufactured was in 2001, and the manufacturers suggested retail was $55.95 – These were made in New York, U.S.A. ********************************FEATURES: - Hollow ground blade. - Lock back with stainless steel lock bar.

  $39.95

Quantity:  

This is a nice Camillus Stockman pattern, 3-3/4 inches closed. Handles are butter and molasses celluloid. The knife is used there is some scratching and spotting on the blades. The blades appear to be about 95% full. There is some pocket wear. An excellent addition to a Camillus collection or for every day carry. Carbon steel blades. Made in USA.

  $45.00

Quantity:  

I bought this knife for my personal use, but I really miss having the sheepfoot blade and have no use for the punch blade. This is an excellent Moore Maker carbon steel Stockman with jigged honey colored bone handles. Length closed: 4 inches, brass liners, nickel silver bolsters and shield, model number 5305, made in 2000. Of course this knife is made in the USA. Negatives-there is some pitting on the main blade-see pictures. Minor pitting on the spey blade.

  $50.00

Quantity:  

SPECIFICATIONS: - Blade Steel- 420HC stainless steel with Titanium Oxide coating - Handles 410 stainless steel with Titanium Oxide coating - Liner 410 stainless steel - Blade Length- 1-15/16” - OAL Closed- 2-7/8” - OAL Open 4-7/8” - Weight 1.9 oz. - MSRP $77.95 - Made in the USA - - - - FEATURES: - Partially serrated blade - Removable Pocket Clip for tip down carry - Frame Lock - Patented SpeedSafe assisted opening system - Safety lock to prevent accidental opening - Comes bulk packed without box.

  $35.00

Quantity:  

Another winning design from Ken Onion. This is a great knife. I have this same model & my son has one also. We both love them! This is a very sharp, solid knife. This is knife is up to tough cutting chores, yet it is small enough (3") and pretty enough that it is Sheeple Friendly. SPECIFICATIONS: - Blade Length- 3" spear blade - Blade Steel- AUS8A - OAL Closed- 4” - OAL Open 6-3/4” - Handles Double anodized, Red Smoke colored aluminum handles - Liners 420 stainless steel - Weight 2.3 oz. - Made in the Japan Features: - Linerlock - Ambidextrous One-Handed Opening - Pocket clip for tip up carry - Partial serrated blade - MSRP $99.99

  $49.95

Quantity:  

SPECIFICATIONS: - Blade Steel- AUS6A high-carbon stainless steel - Handles- Anodized 6061-T6 aircraft-aluminum - Liners- 420 stainless steel - Blade Length- 2-1/8” - OAL Closed- 3” - OAL Open- 5-1/8” - Weight- 1.1 oz. - MSRP- $29.95 - Made in Japan - - - - FEATURES: - Linerlock - Highly scratch resistant black anodized handles. These knives are new but without box. ******************** Excellent light weight but sturdy pocket knife that is "sheeple friendly."

  $14.95

Quantity:  

FEATURES:****** • Fixed Blade • Full Tang for extra Strength • Partial Serration on spine of blade • Double injection-molded handle for superior grip when wet • Quality Leather Sheath SPECIFICATIONS:****** Steel: AUS6A stainless-steel Handle: Co-polymer Blade Length: 6 1/4 in. (15.8 cm) Overall Length: 11 1/8 in. (28.3 cm) Weight: 6.3 oz. Suggested Retail : $56.95 ~~~~~~~~~~~This knife is lightly used & in very good condition. This would make an excellent hunting knife or great backup hunting knife. An outstanding first hunting knife for a new hunter. The handle gives you a good grip not likely to slip when wet.

  $25.00

Quantity:  

This knife is a Camillus version of the famous Schrade Sharpfinger. Camillus began the manufacture of this knife after Schrade closed in July, 2004. They had made many of the knives for Schrade since they were owned by the same family. Camillus closed it doors about 2 ½ years later in February of 2007. When Camillus closed there were some unfinished blanks sold. This knife is made from one of those blanks. The handle is Bubinga. The wood I used on this handle is a highly figured species also known as Waterfall Bubinga. This piece has some chatoyance to it similar to that found in Hawaiian Koa Wood. The effect is much like the old Waterfall Celluloid, where the grain seems almost to move or flow when held in the proper light and moved slowly. ~~~~~~~~~~~~~~~~~~~~ OAL 7 inches. The handles are glued to the tang to prevent moisture from getting between the tang and the handles. Mosaic pins made of brass & nickel silver also hold on the handles, (see close-up in picture 3). There is a hole for a lanyard lined with brass tubing. The knife is stamped Camillus/New York/U.S.A. The blade is etched with my name as the one who customized the knife. This knife comes with a nice leather sheath from Camillus. ***Made in the USA***

  $60.00

Quantity:  

page 1   2    3