All About Pocket Knives

Hey Cooter, I think you got the GEC Mink fever also...

Jack, You did good...nice stag on all those...
I tried to find a stag 72 for a buddy...no luck...didn't take long for them to disappear.

Bob

Jack__________once again,that's some mighty fine looking stag_______take two aspirins,buy another knife, take a nap,and you'll be fine !!!!!!

Love that jigged bone, Cooter Yep ,he's got the "'Fever""________I've got a Burnt Grizzly,and the Bubingo Wood,( love the little Beaver) in the Mink,---I'm gona' pass on the stags maybe???? They are coming out with a pattern #56 ????? wonder what that will be????

Hey guys,got my first three blade,Great Eastern,today ------I got the Cattle Rancher,in Burnt Stag,just not much of a 4 blade person,like the Cattle Baron____I also found couple more, #72 mini-hunter lockback,#18 Burnt Stag and a Genuine Stag ( should arrive in a few days ), I will post pictures when,I get em'________________Monk

GEC Cattle Rancher______with Burnt Stag

Big Monk said:

"Love that jigged bone, Cooter Yep ,he's got the "'Fever""________I've got a Burnt Grizzly,and the Bubingo Wood,( love the little Beaver) in the Mink,---I'm gona' pass on the stags maybe???? They are coming out with a pattern #56 ????? wonder what that will be???? "


I REALLY like the little Mink. I got the fever alright--wish I had more cash! If the 56 is a 3 blade serpentine stockman 3 1/2 to four inches or so, I'll be knocking some cobwebs off the old wallet.

WOW WEEE sure do like this thread.

Thanks to all that post in here.

You all made me pull the triger on this one.
I find it hard to get one blade GEC in stag knive like this one.
Well for me it was.

She is a 23.

Nice one Ken... ...have you seen their Yellow Rose knives...

Bob

That's a nice one JO52___________like others have said,-----the only way to cure the "'GEC Fever"" is to buy another one

WelderBob wrote:Nice one Ken... ...have you seen their Yellow Rose knives...
Bob

Yep pers I have some YELLOW GECs.
YELLOW
Here is my newest one WelderBob. She is a 73. Thank you for asking...

big monk indeed your right. I have some others too. I just had a thing for one bladed GECs. So I filled that need...

Gunstock Jack I like that back side Stag the most. Sweet jewel you have.

Gosh, where to start!

Those Yellow Roses are really nice, and that's coming from an Okie! (Actually, I just bought
a Yellow Rose Cattle Baron from Greg, at TSA, that was an EDC.)

Big Monk, that Northfield stag Rancher is awesome! I really like the swedge blade. I didn't think they
could top the Tidioute, but they did.

What a great time for Great Eastern Cutlery!

Bob here is almost the same one but this one is not a line lock.

Your bring out my YELLOWs

My brother ask for a YELLOW one blade GEC to use. Just can't find a cheep one for him yet...

Always enjoy stopping by this thread!

Nice yellow ones too!

Ken, I figured you had a few put back...

I do like the color on this one...

Bob

Thank you Froggyedge...

I too always enjoy stopping by this thread!!!!!!

I see WelderBob has one YELLOW kool. Now I will not show mine like it. Thank you Bob...

I will add this sweet jewel.

GEC 54 Harness Jack PROTOTYPE Smooth Banana Peel 1095 4 1/8

I've enjoyed following this thread also. 26 pages (so far) of some really great knives.

Here's one I've had for a while, just never got around to taking pics. 2008 Great Eastern stamped #53 Cuban. 2nd cut stag, COA says only 24 produced. Blade is etched 'Factory Test Production Run'.

Don't see many stag with the Great Eastern tang stamp.

Yes this is a long runing thread with some great knives...keep a fellow busy for hour's...

Mumblypeg that second cut Cuban is sweet...don't know how I missed that one...

I got this 73 Scout linerlock 2008 proto a while back.

WelderBob wrote:Yes this is a long runing thread with some great knives...keep a fellow busy for hour's...

Mumblypeg that second cut Cuban is sweet...don't know how I missed that one...

I got this 73 Scout linerlock 2008 proto a while back.

As well you should I reckon! That is SWEET!

Is the #72 pattern the Muskrat? If so, I have one in Red Stag they produced for Bulldog.

mumblypeg wrote:Is the #72 pattern the Muskrat? If so, I have one in Red Stag they produced for Bulldog.

Not the Muskrat,but ,the mini-hunter lockback---

Monk,
Looking forward to seeing them!

Monk, I just couldn't take it, looking at all the beautiful GEC stag you've been posting. I have one of my own on the way now. See what you started?

Hey Mike don't blame me ,WelderBob & Gunstock Jack,got me started, and now,I can't seem to stop HELP !!!!!!!!!!!

Froggy______these GEC's won't bite you like them Case Knives

Mike,_______did you order that Congress, you wuz talkin' about ???? I don't care much,for the congress,but lots of folks do. Great Eastern,makes some pretty ones too !!! Mailman brought a couple of beauties today,that I'll share with you guys , A Genuine Stag & a Burnt Stag. Mike, we gona' be lookin' for a photo of your new one too ,when it arrives

Have A Great Day Guys !!!!!!!!!!!!!!!!!!!!!!!!!!!_______________________Monk

Another couple of beaut's! Big Monk, you has got the FEVA! GEC has the finest stag you can find on todays market. My third GEC genuine stag Mink Skinner is on the way. Love them minks! (but I'm gettin' tired o' beans...)

Hey Monk, You did well...great stag on both, you know the burnt stag could almost pass for genuine...a little toasty
around the edge's give's it away...

Now on the Red stag 72...I didn't know they made one...I'm not a bit jealous.....

Bob

Wow Monk, there you go again! You and Gunstock Jack are spreading stag fever all over the place. Beautiful knives you've been showing. Are you carrying any of them?

I did order that half congress after I talked with you, I couldn't help it. It's kind of an odd pattern but it feels good in the hand and I like the sheeps foot primary blade. The two blade congress seems to be hard to come by and I couldn't resist a Northfield in stag. I'm going to carry this one.

It should be here tomorrow and I'll post a photo.

Keep 'em coming guys!

A Great Day Guys !!!!!!!!!!!!!!!!!!!!!!!!!!!_______________________ YUP pers if a mail-man brought them to me I would be happy... GOOD BUY.. big monk

Not sure if this is the right place to ask. So if this gets moved thats ok with me.

I have forgeten the diffrance between the Tidioute and the Norhfield UN-X-LD. lets take the sleevboard.

Both 3"
Both 1095 Carbon Steel Blades
Both nickel silver bolsters

Now is the BABY SUNFISH the same as the SLEEVEBOARD ?? (both 3" 2 blades)

Unconfused me please...

Ken