TL-29 Electricians Knives

This forum is dedicated to the discussion and display of old knives. The rich history of all the many companies that made them through the early years will be found here as well as many fine examples of the cutlers art. Share pictures of your old knives and your knowledge here!
Post Reply
User avatar
orvet
Gold Tier
Gold Tier
Posts: 19336
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Re: TL-29 Electricians Knives

Post by orvet »

coffeecup wrote:
I've always wondered if they were made during the Great Depression/pre-WWII years. Mine is reasonably well-made, but the bail suggests an attempt to lower costs.

Jim
I agree Jim. It looks like a bail on an inexpensive scout or camper pattern.
I actually have two TL-29s with a similar type bail. One on an shell handle Imperial and one on a Ric-Nor, which was possible made by Camillus. Tom Williams once told me that Camillus made some Ric-Nor TL-29s, but I don't know if they made all of them.

Dale
Dale
AAPK Administrator

Please visit my AAPK store: www.allaboutpocketknives.com/orvet

Job 13:15

"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
trail
Posts: 1325
Joined: Wed Apr 29, 2009 1:14 am

Re: TL-29 Electricians Knives

Post by trail »

I have accumulated enough TL-29s and variants that I can usually pass them by, but this one was in comparatively good shape (i.e., nobody took a grinder to the edge of the screwdriver trying to sharpen it, the liner lock is not twisted and bent, the bail isn't missing, etc, etc) and I don't already have a decent Klein three blade hawksbill, so I bought it. A little elbow grease could make this one look practically new.
Attachments
klein_3_blade_elec_scaled.jpg
Rifleman
Posts: 42
Joined: Sun Jul 11, 2010 1:17 am

Re: TL-29 Electricians Knives

Post by Rifleman »

I picked this up today at a gunshow.It's a Ka Bar.It has U.S.ARMY stamped on the walnut handle.ARMY is hard to make out.It has steel bolsters and a steel lock.The camera died before I could get a picture of the blades.The blades are stained but are in very good condition.You need a glass to read the KA BAR but thr OLEAN N.Y. is readable.I looked through this thread and didn't see a KA BAR mentioned.Are these rare?



064.jpg
User avatar
orvet
Gold Tier
Gold Tier
Posts: 19336
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Re: TL-29 Electricians Knives

Post by orvet »

Rifleman wrote: I looked through this thread and didn't see a KA BAR mentioned.Are these rare?
I don't know how common the Ka-Bar TL-29 is, but they are nowhere as common as the Camillus or the other brands made by Camillus.
Now that I think about it, the Ks-bar may have been made by Camillus as well.
That is research I will have get to someday....... :lol:

Dale
Dale
AAPK Administrator

Please visit my AAPK store: www.allaboutpocketknives.com/orvet

Job 13:15

"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
gino
Posts: 8069
Joined: Sun Feb 28, 2010 3:50 pm

Re: TL-29 Electricians Knives

Post by gino »

Here is a little transformed one. Bokote wood handles - lost the driver blade and filed spring.
work by Caddyman73
Attachments
Gina 047.jpg
-( life is too short to carry a cheap knife )-
jmh58
Posts: 13448
Joined: Wed Apr 02, 2008 11:22 pm
Location: Pgh,Pa

Re: TL-29 Electricians Knives

Post by jmh58 »

Hey Gino.... ::ds:: ::tu:: ::ds:: SWEEEEEEEETTTTT!! John
Not all who wander are lost!!

Of all the paths you take in life,
Make sure some of them are Dirt!!!
Rifleman
Posts: 42
Joined: Sun Jul 11, 2010 1:17 am

Re: TL-29 Electricians Knives

Post by Rifleman »

Thanks.I just found this book on google books by C. Houston Price, Mark D. Zalesky that describes my Ka Bar as having wood handles and stamped U.S. ARMY.When the page comes up,scroll down a bit.


http://books.google.com/books?id=ko-r0f ... &q&f=false
User avatar
Gunstock Jack
Posts: 1626
Joined: Wed Feb 27, 2008 7:59 pm
Location: The "other" Washington

Re: TL-29 Electricians Knives

Post by Gunstock Jack »

I have an old Empire electrician's knife on fee bay right now if anyone is interested.

http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... :MESELX:IT
Barry

Great Eastern Cutlery distributor: http://www.gunstockjacksknives.com
Contact me: info@gunstockjacksknives.com
User avatar
orvet
Gold Tier
Gold Tier
Posts: 19336
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Re: TL-29 Electricians Knives

Post by orvet »

I put a bid on it Jack to get things started.

Dale
Dale
AAPK Administrator

Please visit my AAPK store: www.allaboutpocketknives.com/orvet

Job 13:15

"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
User avatar
Gunstock Jack
Posts: 1626
Joined: Wed Feb 27, 2008 7:59 pm
Location: The "other" Washington

Re: TL-29 Electricians Knives

Post by Gunstock Jack »

Thanks, Dale!
Barry

Great Eastern Cutlery distributor: http://www.gunstockjacksknives.com
Contact me: info@gunstockjacksknives.com
User avatar
On Edge
Posts: 1373
Joined: Tue Oct 26, 2010 8:18 pm
Location: Southern VA

Re: TL-29 Electricians Knives

Post by On Edge »

I might go peek at that myself, Jack ...

I was an electrician in another life, and actually carried an M Klein & Sons version for years ... not sure where she went ... I'm thinkin there's a garage excavation in my near future ...

::nod::
"Any man who can drive safely while kissing a pretty girl is simply not giving the kiss the attention it deserves."

~ Albert Einstein
trail
Posts: 1325
Joined: Wed Apr 29, 2009 1:14 am

Re: TL-29 Electricians Knives

Post by trail »

I'm in total agreement, Aimus, the TL-29 thread should not be shrouded in the fogs of history. Let's bump it back to the front and go to town!
trail
Posts: 1325
Joined: Wed Apr 29, 2009 1:14 am

Re: TL-29 Electricians Knives

Post by trail »

I posted this one in another thread but it should be on the "official" TL-29 thread. A brand new Utica. Yep, Utica is still making them in original configuration (Bear has one with a hawkbill blade).
Attachments
utica_elec_scaled.jpg
User avatar
AREMINGTONSEDGE
Posts: 1903
Joined: Tue Jan 03, 2012 6:01 pm
Location: MECHANICSVILLE, VIRGINIA

Re: TL-29 Electricians Knives

Post by AREMINGTONSEDGE »

This is a great thread! ::super_happy:: I love the knives fellas! ::tu:: I just gave my Mom a replacement Camillus TL-29 related to a "no longer employed" handyman stealing hers. She took it hard because it was my Dad's knife. She's much better now! Thanks for the catalog pictures I've copied them to my files for future reference. ::handshake:: Rocky
Rocky, AKA- AREMINGTONSEDGE
User avatar
Miller Bro's
Gold Tier
Gold Tier
Posts: 11618
Joined: Mon Feb 16, 2009 11:22 pm
Location: Earth

Re: TL-29 Electricians Knives

Post by Miller Bro's »

Here is a brand not shown before..........

ImageImage
AAPK Janitor
369
User avatar
jerryd6818
Gold Tier
Gold Tier
Posts: 39165
Joined: Sun Jan 04, 2009 5:23 am
Location: The middle of the top of a bastion of Liberalism.

Re: TL-29 Electricians Knives

Post by jerryd6818 »

Red Devil - Made (or at least sold) things like putty knives, scrapers, utility knives, etc.
Forged on the anvil of discipline.
The Few. The Proud.
Jerry D.

This country has become more about sub-groups than about it's unity as a nation.

"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
User avatar
Miller Bro's
Gold Tier
Gold Tier
Posts: 11618
Joined: Mon Feb 16, 2009 11:22 pm
Location: Earth

Re: TL-29 Electricians Knives

Post by Miller Bro's »

I think Empire made these knives for them ::nod::

Here is an interesting footnote as to the use of the "Red Devil" trademark;
Red Devil, Inc.. Retrieved 2010-11-24. "Founded as Smith & Hemenway Company, Inc. in 1872 in Hill, New Hampshire, our place in hardware history was established over 134 years ago with production of several types of glass cutters, one of which, the "Woodward Wizard", was patented. ... During a buying trip to Sweden, the company's founder, Landon P. Smith, heard a blacksmith remark "those little red devils" after sparks from a forge singed his arm. The name stuck in Smith's mind and upon his return to the States he began to label many of the tools he sold with the Red Devil trademark. By the late 19th century, do-it-yourselfers as well as professionals were depending on our top-performing products."
AAPK Janitor
369
User avatar
jerryd6818
Gold Tier
Gold Tier
Posts: 39165
Joined: Sun Jan 04, 2009 5:23 am
Location: The middle of the top of a bastion of Liberalism.

Re: TL-29 Electricians Knives

Post by jerryd6818 »

Now that's the kind of history I like. Thanks Dimitri.
Forged on the anvil of discipline.
The Few. The Proud.
Jerry D.

This country has become more about sub-groups than about it's unity as a nation.

"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
User avatar
Miller Bro's
Gold Tier
Gold Tier
Posts: 11618
Joined: Mon Feb 16, 2009 11:22 pm
Location: Earth

Re: TL-29 Electricians Knives

Post by Miller Bro's »

Your welcome Jerry! :wink:
AAPK Janitor
369
User avatar
orvet
Gold Tier
Gold Tier
Posts: 19336
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Re: TL-29 Electricians Knives

Post by orvet »

Thanks Dimitri, Great history and a new TL-29 brand to add to my list.

Here is the list if anyone is interested:

Boker
Camillus
Camco
Case
Cattaraugus
Challenge
Colonial
Craftsman
Electric Mate (Prov Cut. Co.)
Empire
FD (Sears)
AE Fuller
Holub
Imperial
Jensen
Ka Bar
Keen Kutter
Kingston
Kutmaster
Klein Tools
M. Klein & Sons
Miller Bros. U.S.A.
OK (Ontario Knife)
Pal
Powr-Kraft
John Primble #47
Proto
Prov. Cut. Co.
Queen
Red Devil
Remington
Ric-Nor -made by Prov. Cut. Co.
Robeson
Robeson Shuredge
SCC (Schrade)
Schatt & Morgan
Schrade Cut Co
Schrade Imperial
Schrade Walden
Sears
Ulster
Union Cut. Co.
Utica
Western
Winchester
No Name
Dale
AAPK Administrator

Please visit my AAPK store: www.allaboutpocketknives.com/orvet

Job 13:15

"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
User avatar
Miller Bro's
Gold Tier
Gold Tier
Posts: 11618
Joined: Mon Feb 16, 2009 11:22 pm
Location: Earth

Re: TL-29 Electricians Knives

Post by Miller Bro's »

Thanks Dale, and that is quite a list :o ::tu::
AAPK Janitor
369
User avatar
jerryd6818
Gold Tier
Gold Tier
Posts: 39165
Joined: Sun Jan 04, 2009 5:23 am
Location: The middle of the top of a bastion of Liberalism.

Re: TL-29 Electricians Knives

Post by jerryd6818 »

Dale, should that M. Klein & Sons be just Klein & Sons since we now know those prefix letters are a date code? Or am I off in left field again or should I say as usual. Your opinion please young Devil Dog.
Forged on the anvil of discipline.
The Few. The Proud.
Jerry D.

This country has become more about sub-groups than about it's unity as a nation.

"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
User avatar
Miller Bro's
Gold Tier
Gold Tier
Posts: 11618
Joined: Mon Feb 16, 2009 11:22 pm
Location: Earth

Re: TL-29 Electricians Knives

Post by Miller Bro's »

Jerry, the "M" stands for Mathias, Mathias Klein the founder of the company.
AAPK Janitor
369
User avatar
jerryd6818
Gold Tier
Gold Tier
Posts: 39165
Joined: Sun Jan 04, 2009 5:23 am
Location: The middle of the top of a bastion of Liberalism.

Re: TL-29 Electricians Knives

Post by jerryd6818 »

::shrug:: Wrong again. Oh well, I'm used to it.
Forged on the anvil of discipline.
The Few. The Proud.
Jerry D.

This country has become more about sub-groups than about it's unity as a nation.

"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
User avatar
orvet
Gold Tier
Gold Tier
Posts: 19336
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Re: TL-29 Electricians Knives

Post by orvet »

The Klein knives were produced with both tang stamps at different times.
Does anyone know when the change was?
Dale
AAPK Administrator

Please visit my AAPK store: www.allaboutpocketknives.com/orvet

Job 13:15

"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
Post Reply

Return to “Knife Lore - Traditional Knives From the Old Days”