TL-29 Electricians Knives

This forum is dedicated to the discussion and display of old knives. The rich history of all the many companies that made them through the early years will be found here as well as many fine examples of the cutlers art. Share pictures of your old knives and your knowledge here!
User avatar
Bear Claw Chris Lappe
Posts: 134
Joined: Sun Dec 12, 2004 2:16 pm

Post by Bear Claw Chris Lappe »

Well last week this thread threw a craving on me to get a TL-29 to carry sometimes, I won't carry the above one that belonged to my dad for fear of losing it, so one night last week I tossed a bid that even I thought was low on one on Ebay, and danged if I didn't win this one.

Image

It's a Camillus 27, brand new/unused, still in the factory packaging with smooth brown Delrin scales, and it may be the best "deal" I ever got on a knife, I won it for a whole $6.50!
Image
Buck Collector's Club Member #1631
User avatar
orvet
Gold Tier
Gold Tier
Posts: 19336
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Post by orvet »

There seem to be a lot of Camillus TL-29s on ebay, probably more than any other brand. I have gotten used ones for as little as $2.00 each with shipping, in a lot buy. Ironically the Camillus seem to be of better quality than many other TL-29 knives available.

You got a good deal Chris, congratulations! ::tu::
Enjoy your new knife, it has great carbon steel in the blade.

Dale
Dale
AAPK Administrator

Please visit my AAPK store: www.allaboutpocketknives.com/orvet

Job 13:15

"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
Mossdancer
Gold Tier
Gold Tier
Posts: 2484
Joined: Sun Oct 09, 2005 11:50 pm
Location: S.W. Wa.

Back for one more

Post by Mossdancer »

Hello;
Just received this from a friend today. It isn't like either of the two Remingtons on page one. I thought Remco could enlighten us some on it. It has the same tang stamp as another rem I have which id's to mid 30's. The handle is wood the bail is missing. The liner lock extends the full length of blade trough. Needs a good cleaning. My guess to model would be something like r2101. There is no r number at all.
wb
Attachments
PICT0005.JPG
PICT0003.JPG
PICT0001cs.jpg
PICT0001cs.jpg (62.07 KiB) Viewed 5048 times
I STAND FOR OUR NATIONAL ANTHEM
User avatar
orvet
Gold Tier
Gold Tier
Posts: 19336
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Post by orvet »

Great Remington WB! ::drool:: ::drool:: ::drool:: ::drool:: ::tu::

I am still looking for a Remington, a Winchester and an Empire to go in my TL-29 collection. I have about 28 other brands, but those three have eluded me so far.

Dale
Dale
AAPK Administrator

Please visit my AAPK store: www.allaboutpocketknives.com/orvet

Job 13:15

"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
User avatar
muskrat man
Gold Tier
Gold Tier
Posts: 5667
Joined: Fri Jun 30, 2006 4:04 am
Location: Ohio
Contact:

Post by muskrat man »

How did I end up with all of these thingies with screwdrivers on them? ::shrug:: :lol: :roll: :lol: ::shrug::

camillus
camillus
camillus
camco
powerkraft
klein
18500 proto usa
kingston
sabre
Attachments
tl-29.JPG
Custom knives, repair, restoration & embellishment
Certified Hubertus, Taylor, & Schrade repairman past and present
http://www.muskratmanknives.com
https://www.facebook.com/Muskratmanknives
User avatar
orvet
Gold Tier
Gold Tier
Posts: 19336
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Post by orvet »

:lol: :lol: :lol:
Kaleb,
I would be happy to trade you out of the Powrkraft & Proto.
Those are two that I don't have yet. I have 31 other brands, but not those two. Wanna trade or sell?

An even more difficult question is what do I do with all the screwdriver blades after I have modified them? :lol:

Dale
Dale
AAPK Administrator

Please visit my AAPK store: www.allaboutpocketknives.com/orvet

Job 13:15

"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
User avatar
muskrat man
Gold Tier
Gold Tier
Posts: 5667
Joined: Fri Jun 30, 2006 4:04 am
Location: Ohio
Contact:

Post by muskrat man »

what have you got to trade? email me
Custom knives, repair, restoration & embellishment
Certified Hubertus, Taylor, & Schrade repairman past and present
http://www.muskratmanknives.com
https://www.facebook.com/Muskratmanknives
User avatar
muskrat man
Gold Tier
Gold Tier
Posts: 5667
Joined: Fri Jun 30, 2006 4:04 am
Location: Ohio
Contact:

Post by muskrat man »

BTW email me a list of the brands you have.
Custom knives, repair, restoration & embellishment
Certified Hubertus, Taylor, & Schrade repairman past and present
http://www.muskratmanknives.com
https://www.facebook.com/Muskratmanknives
User avatar
orvet
Gold Tier
Gold Tier
Posts: 19336
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Post by orvet »

Email inbound.
Dale
AAPK Administrator

Please visit my AAPK store: www.allaboutpocketknives.com/orvet

Job 13:15

"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
User avatar
muskrat man
Gold Tier
Gold Tier
Posts: 5667
Joined: Fri Jun 30, 2006 4:04 am
Location: Ohio
Contact:

Post by muskrat man »

got it, back at ya. I'm in the chat if you want to talk it over/if you have the time.
Custom knives, repair, restoration & embellishment
Certified Hubertus, Taylor, & Schrade repairman past and present
http://www.muskratmanknives.com
https://www.facebook.com/Muskratmanknives
cstricklen
Posts: 44
Joined: Fri Jan 27, 2006 12:43 pm
Location: Ohio
Contact:

Post by cstricklen »

I'm new to the forum, and I'm seeing this thread for the first time. Great old knives, but you know what? I like this best: ::nod::
Attachments
What a clean and pretty ad design. It would still stand up today. Maybe I'll borrow the layout. :-)
What a clean and pretty ad design. It would still stand up today. Maybe I'll borrow the layout. :-)
ad_t_rem_102.jpg (26.19 KiB) Viewed 4889 times
User avatar
orvet
Gold Tier
Gold Tier
Posts: 19336
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Post by orvet »

I was reading back through this thread today and came upon the discussion (page two of this thread) as to the origin of the TL-29s with the M. Klein tang stamp. I do have some updated information.

I was talking recently with Tom Williams (CAMCO) and he said that Camillus did make the M. Klein TL-29s for a few years. This information doesn't answer all questions raised on page two, but it does add some interesting additional info.

Also in looking back through this thread I noticed that no one had yet posted a bone handled TL-29. According to Michael Silvey’s book "Pocket Knives of the United States Military" there were a few of them made by PAL Blade Co. The ones he shows are both marked U. S. Army, one on the pile tang of the main blade, the other by etch on the screwdriver tang.

Recently I was able to purchase one of these knives on eBay. However, my example does not have the U.S. Army stamp on it. If the tang was etched it has long since worn off. There are no markings on the pile side of the knife and the main blade is pretty worn.
Nonetheless, it is a welcome addition to my collection, being the only example in my collection of a bone handled TL-29.

Dale
Attachments
TL29 Pal Blade Co.jpg
Dale
AAPK Administrator

Please visit my AAPK store: www.allaboutpocketknives.com/orvet

Job 13:15

"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
User avatar
jonet143
Gold Tier
Gold Tier
Posts: 6922
Joined: Fri Jun 23, 2006 3:33 am
Location: w'ford-tejas

Post by jonet143 »

cool addition dale.
johnnie f 1949

on the cutting edge is sometimes not the place to be.
please support our troops - past and present
if not a member...join the NKCA! they're on our side.
acourvil
Posts: 17
Joined: Sat Dec 30, 2006 9:37 pm
Location: San Jose, CA

Post by acourvil »

Yes, very nice addition. I have a bone handled Camillus TL29, 4 line marking. I'll try to take some pics and post them this weekend.

Art
User avatar
orvet
Gold Tier
Gold Tier
Posts: 19336
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Post by orvet »

Yes, please do Art!

I would love to see it! ::drool::

Dale
Dale
AAPK Administrator

Please visit my AAPK store: www.allaboutpocketknives.com/orvet

Job 13:15

"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
User avatar
knowtracks
Posts: 903
Joined: Sun Jan 28, 2007 9:28 pm
Location: S. W. Montana

Post by knowtracks »

This is the only "29" that I have...It's a Schatt ::tu::

Dave
Attachments
DSC00969.JPG
DSC00969.JPG (95.4 KiB) Viewed 10309 times
I don't speak no Flathead ya know!
User avatar
muskrat man
Gold Tier
Gold Tier
Posts: 5667
Joined: Fri Jun 30, 2006 4:04 am
Location: Ohio
Contact:

Post by muskrat man »

here are some electrician knives, some can't quite be called tl-29's but none the less.

mint camillus
Image

near mint case 3 blade
Image


near mint kutmaster 3 blade
Image

mint kutmaster two blade, serrated
Image

queen
Image

excellent case 1970 10 dot
Image
Custom knives, repair, restoration & embellishment
Certified Hubertus, Taylor, & Schrade repairman past and present
http://www.muskratmanknives.com
https://www.facebook.com/Muskratmanknives
acourvil
Posts: 17
Joined: Sat Dec 30, 2006 9:37 pm
Location: San Jose, CA

Post by acourvil »

Here are a couple. Not the greatest pics.
Attachments
CamBoneTL-29_2.JPG
CamBoneTL-29_1.JPG
User avatar
orvet
Gold Tier
Gold Tier
Posts: 19336
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Post by orvet »

I have finally added not one but two bone handled TL-29s to my collection.
A Camillus & a Pal Blade Co.


I am happy! :mrgreen:

Dale
Attachments
TL29 Pal Blade Co.jpg
Camillus TL29 bone b.jpg
Camillus TL29 bone a.jpg
Dale
AAPK Administrator

Please visit my AAPK store: www.allaboutpocketknives.com/orvet

Job 13:15

"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
User avatar
jonet143
Gold Tier
Gold Tier
Posts: 6922
Joined: Fri Jun 23, 2006 3:33 am
Location: w'ford-tejas

Post by jonet143 »

::tu:: great knives.
johnnie f 1949

on the cutting edge is sometimes not the place to be.
please support our troops - past and present
if not a member...join the NKCA! they're on our side.
User avatar
blueskat
Posts: 51
Joined: Sat Dec 15, 2007 11:08 pm

Re: TL-29 Electricians Knives

Post by blueskat »

I like the old TL-29 camillus as well. What type of steel did they use? Seems hard to sharpen when brand new, but once you get the profile down a bit, they can be like a razor.


-BluesK 8)
Attachments
IMG_0028.JPG
IMG_0028.JPG (30.86 KiB) Viewed 10125 times
IMG_0029.JPG
IMG_0029.JPG (51.3 KiB) Viewed 10123 times
User avatar
RobesonsRme.com
Posts: 9887
Joined: Wed Jan 28, 2009 3:44 pm
Location: The Heart of Dixie.
Contact:

Re: TL-29 Electricians Knives

Post by RobesonsRme.com »

I looked at the entire TL-29 thread. Nice Knives.

I did not see a Robeson. I could of missed one, don't know. So, here is my one and only WWII Robeson TL-29.
Notice that it has no bail. It never did. However, I've seen Robeson TL-29's with a bail, so I
guess I need to find a nice one.

Robeson made the knife after the war as a civilian item. It's pattern number was 222030,
shown below.

As my dad was an electrician, I have some of his, still. There's a Camillus, a Holub and a Klein.
His black handled Camillus was actually part of a lineman's set with knife and pliers in a leather
two compartment pouch. I'm sure it was post war, though, as the pliers were made by Boker.
The three pieces are not together, but they're all here somewhere. It'd take me a bit of
searching to get them all together again.

I don't know why these photos came out so large. They are only 3"x3" in my photo program,
and all my other picture posts come out correctly.

Charlie Noyes
Attachments
TL29B.jpg
TL29B.jpg (95.75 KiB) Viewed 10103 times
222030B.jpg
222030B.jpg (96.55 KiB) Viewed 10099 times
DE OPPRESSO LIBER

"...Men may spurn our appeals, reject our message, oppose our arguments, despise our persons ___but they are helpless against our prayers. "

Sidlow Baxter
User avatar
philco
Gold Tier
Gold Tier
Posts: 14949
Joined: Sat Mar 22, 2008 9:32 pm
Location: Kentucky (Wildcat Country)

Re: TL-29 Electricians Knives

Post by philco »

:shock: :shock: KNIFEZILLA!! Run for your lives!!!!! :lol: :lol:
Phil
AAPK Administrator

Jesus died for you. Are you living for Him?

"Buy More Ammo!"
Johnnie Fain 1949-2009
User avatar
philco
Gold Tier
Gold Tier
Posts: 14949
Joined: Sat Mar 22, 2008 9:32 pm
Location: Kentucky (Wildcat Country)

Re: TL-29 Electricians Knives

Post by philco »

These two showed up in my mailbox just today.
An Imperial and a U.S.A. Boker.
Attachments
IMG_2818.JPG
Phil
AAPK Administrator

Jesus died for you. Are you living for Him?

"Buy More Ammo!"
Johnnie Fain 1949-2009
Hukk
Posts: 4546
Joined: Mon Mar 06, 2006 4:04 am

Re: TL-29 Electricians Knives

Post by Hukk »

blueskat wrote:I like the old TL-29 camillus as well. What type of steel did they use? Seems hard to sharpen when brand new, but once you get the profile down a bit, they can be like a razor.


-BluesK 8)
I believe the steel is 0170-6C, known as Carbon V by Cold Steel and known as CV by Case. The original steel name is 50100-B, one of the most common steels in he industry at least when Schrade and Camillus were in business. I would have to guess that 440A is the most common now coming out of China.
Hukk
Post Reply

Return to “Knife Lore - Traditional Knives From the Old Days”