3rd Generation Bulldog Brand Knives

Bulldog Brand Lockback Canoe Prototype - BKC 578-A Knife3 1/2 SS Lockback Canoe Prototype BKC 578-A
This is a Single Blade Canoe Lockback. The blades of this knife are made stainless steel. This knife is 3 ? inches closed. The Single Lockback blade has the Bulldog Brand with a pair of Fighting Pit-Bulls Black Laser etched with Prototype 1 of 5 engraved on the back. The tang is stamped with the Fighting Pit-Bulls, with ROSTFREI SOLINGEN stamped on the reverse. This Bulldog Knife uses a Rostfrei blade. The handles are made of a deep red composite material with a heraldic shield. BKC 578-A, 1 of 5. This is a RARE Third Generation KNIFE!


Bulldog Brand Small Congress KnifeBulldog Third Generation 3 78 Small Congress ~ Genuine Stag ~ 1 of 12
HAND MADE BULLDOG BRAND KNIFE! This well made Third Generation 4 blade Congress model has mirror polished Surgical Instrument Steel Blades. The tang is stamped with the Fighting Dogs Stamp with Surgical Steel on the reverse side. Overall length of this knife is 3 7/8 inches closed. The reverse side of the master blade has BD 1 of 12 engraved on it. The handles are well matched Genuine Stag with the Bar Shield. The Third Generation was the official end of the Fighting Dog Stamp until the 25th Anniversary knives came out. This knife is in new condition (Pristine Mint) and has never been sharpened, carried, or used. Only 12 of these 3 7/8 4 blade congress knives were made in surgical steel, making this a very RARE knife.


Bulldog Brand Sowbelly Whittler KnifeBULLDOG KNIFE 3 7/8 SOWBELLY ~ USA MADE ~ Red Jigged Bone
This is a 3 7/8 Closed USA Sowbelly 3 blade Whittler. The blades have No Etch. The tang is stamped with the Fighting Dogs Stamp with Made in USA on one blade and 1995 on another. The handles are Red Jigged Bone with an oval shield. This knife is 1 of 2 different Bulldog knives made in the USA but the Sowbellies are the best known. BKC 1144, 1 of 250.


Bulldog Brand Sowbelly Whittler KnifeBulldog Sowbelly Whittler Smooth Bone ~ USA ~ 3 7/8 inches
This is a 3 7/8 Closed USA Sowbelly 3 blade Whittler. The blades have No Etch. The tang is stamped with the Fighting Dogs Stamp with Made in USA on one blade and 1995 on another. The handles are Smooth Bone with an oval shield. This knife is 1 of 2 different Bulldog knives made in the USA but the Sowbellies are the best known. BKC 1145, 1 of 210.


Bulldog Brand Sowbelly Whittler KnifeBulldog Sowbelly Whittler Yellow Pick Bone ~ USA ~ 3 7/8 inches
This is a 3 7/8 Closed USA Sowbelly 3 blade Whittler. The blades have No Etch. The tang is stamped with the Fighting Dogs Stamp with Made in USA on one blade and 1995 on another. The handles are Yellow Pick Bone with an oval shield. This knife is 1 of 2 different Bulldog knives made in the USA but the Sowbellies are the best known. 1 of 250.


Bulldog Brand Big Whittler KnifeBulldog Brand 3 blade BIG WHITTLER KNIFE
This is a 3 Blade Big Whittler. This knife was introduced in 1993 with a 1/8 inch thick master blade and was pattered after an 1834 J. A. Henckel Whittler. The tang is stamped with the Fighting Dogs Stamp and the blades are not etched. Overall length of this knife is 4 inches closed. The handles are Autumn Celluloid with a Heraldic shield. BKC 1114.


Bulldog Brand Prototype Canoe Knife3.5 inch Prototype Canoe
This is a 3 1/2 inch closed Canoe. The master blade has the Fancy Pit Bull Trademark Blade etch. On the reverse of the blade is engraved “PROTOTYPE”. Both blades have the Fighting Dog tang stamp. This knife has the Hummingbird Feather Celluloid handles with a BAR Shield. This is BKC 579-C. Only 5 of each handle were made.


Bulldog Brand Lockback Canoe Prototype - BKC 578-A Knife3.5 inch SS Lockback Canoe Prototype BKC 578-A
This is a 3 ? inch closed Single Blade Canoe Lockback. The blades are stainless steel. The Single Lockback blade has the Bulldog Brand with a pair of Fighting Pit-Bulls Black Laser etched with Prototype 1 of 5 engraved on the back. The tang is stamped with the Fighting Pit-Bulls with nothing stamped on the reverse. The handles are made of a Turquoise Blue composite material with a Heraldic Shield. BKC 578-A, 1 of 5. RARE Third Generation KNIFE!


Bulldog Brand 5 Blade Sowbelly Stock Knife5 Blade Sowbelly
This is a 5 Blade Sowbelly. The master blade has the Pit-Bull Trademark etch. The tang is stamped with the Fighting Dogs Stamp on all tangs. Overall length of this knife is 3 5/8 inches closed. The handles are Greenbone with the Acorn Shield. This knife is BKC 888. Only 100 knives were made in this configuration.


Bulldog Brand 1995 Prototype Canoe Knife1995 Proto Canoe
This is a 3 5/8 inch 2 blade Canoe. Both the blades have the Fighting Dogs tang stamp. The master blade has the Pit-Bull Trademark etch. The reverse is marked with Prototype. The handles are Purple Swirl Celluloid with the Bar Shield. This is a Prototype made in the final year of the Third Generation.


Bulldog Brand Johnny Appleseed Sowbelly Knife1996 Johnny Appleseed Sowbelly
This is a 3 7/8 inch Closed USA Sowbelly 3 blade Whittler. The master blade has the 1996 Johnny Appleseed Knife Collectors Etch. This is a club knife with the serial number 35. Only 50 knives were made. The tang is stamped with the Fighting Dogs Stamp with made in USA, Oil Hardened on one blade and 1995 on another. The handles are Genuine Stag with an oval shield.


Bulldog Brand 5 Blade Serpentine Sowbelly Knife3 5/8 5 Blade Serpentine Sowbelly ~ 3rd Generation ~ Coon Stripe
This is a 5 Blade Sowbelly. The master blade has the Pit-Bull Trademark etch. The tang is stamped with the Fighting Dogs Stamp on all tangs. Overall length of this knife is 3 5/8 inches closed. The handles are Coon Stripe Celluloid with the Acorn Shield. This knife is BKC 890. Only 100 knives were made in this configuration.


Bulldog Brand Prototype Lockback Canoe Knife - 1 of 2Bulldog 4 1/2 Inch PROTOTYPE Lockback Canoe 1 of 2
This is a Single Blade Lockback Canoe. The blades of this knife are made of Surgical Instrument Steel. The tang is stamped with the Fighting Dogs Stamp. The single blade is etched with the Pit-Bull Trademark etch and the reverse is engraved with Prototype and BD002. Overall length of this knife is 4 1/2 inches. The handles are Purple Swirl Celluloid. BKC 579-C, only 2 made. RARE!


Bulldog Brand Hawbaker Muskrat KnifeBulldog 1995 Muskrat
This is a 2 blade Muskrat with a Hawbaker blade. The master blade has no etch. The tang is stamped with the Fighting Bulldogs Stamp on all tangs and 1995. Overall length of this knife is 4 inches closed. The handles are Genuine Stag with a Dog Head Shield.


Bulldog Brand Muskrat KnifeBULLDOG BRAND PEACOCK BLADE COLLECTOR w/ COA
This is a 4 inch closed 2 blade Muskrat. This knife has Surgical Instrument Steel blades. The master blade has the Peacock etch with SS 005 engraved on the reverse. The tangs are stamped with the Fighting Dogs Stamp on all tangs. This knife has Abalone celluloid handles and a ACORN Shield. This knife has a COA. This is serial number 005. BKC 780 1 of 100.


Bulldog Brand Prototype Cattle Knife KnifeBulldog Brand Prototype Cattle Knife Buffalo Horn
This is a 3 ? inch closed Cattle King. The tang is stamped with the Fighting Bulldogs Stamp on all tangs The master blade is etched with the Pit-Bull Trademark etch. The reverse of the master blade is engraved with “Prototype”. The handles are Buffalo Horn with a Bowtie Shield. This knife has a COA. This is a RARE 1 of 5 Buffalo Horn Prototype, BKC 619-A.


Bulldog Brand Cattle King Stockman KnifeBULLDOG CATTLE KING MOTHER OF PEARL CATTLE KNIFE
This is a 4 ? inch 3 blade Cattle King Equal End Stockman. This knife has Surgical Inst. Steel. The Master blade has the Cattle King etch. The tang is stamped with the Fighting Dogs Stamp on all tangs. The handles are Genuine Pearl with the Bow Tie Shield with Bulldog stamped on it and fancy pinched Bolsters. This knife is BKC 592. Only 29 knives were made in this configuration.


Bulldog Brand Large Congress KnifeBulldog Knife 4 1/4 Inch Large Congress ~ 3rd Generation ~ Stag
This is a 4 blade Large Congress. The master blade has the Pit-Bull Trademark etch. The tang is stamped with the Fighting Dogs Stamp on all tangs. Overall length of this knife is 4 ? inches closed. The handles are Genuine Stag with the Bowtie Shield with Bulldog written inside. It also has fancy Pinched Bolsters. This knife is BKC 656. 100 knives were made in this configuration.


Bulldog Brand Large Congress KnifeBulldog Knife 4 1/4 Inch Large Congress ~ 3rd Generation ~ Stag
This is a 4 blade Large Congress. This knife has Surgical Instrument Steel Blades. The Master blade has the Pit-Bull Trademark etch. The tang is stamped with the Fighting Dogs Stamp on all tangs. Overall length of this knife is 4 ? inches closed. The handles are Genuine Stag with the Bowtie Shield with Bulldog written inside. It also has fancy Pinched Bolsters. BKC 661. 100 knives were made in this configuration.


Bulldog Brand Scimitar Sowbelly KnifeClub Scimitar Sowbelly
This is a 3 3/8 inch closed Card Series Sowbelly commonly called the Scimitar Sowbelly because of the shape and sharpness of the 1995 blades. All blades have the Fighting Dog Tang Stamp and the reverse of the master blade has 1995. The master blade has a black laser etching of a pair of Fighting Dogs and Bulldog Brand. The reverse of the master blade is engraved with 1 of 1. The handles are Blue and White Striped Celluloid with a Club Shield. This is a 1 only, RARE knife!


Bulldog Brand Cracked Ice Scimitar Sowbelly KnifeCracked Ice Scimitar Sowbelly
This is a 3 3/8 inch closed Card Series Sowbelly commonly called the Scimitar Sowbelly because of the shape and sharpness of the 1995 blades. All blades have the Fighting Dog Tang Stamp and the reverse of the master blade has 1995. The master blade has a black laser etching of a pair of Fighting Dogs and Bulldog Brand. The reverse of the master blade is engraved with 1 of 1. The handles are Cracked Ice with a Heart Shield. This is a 1 only, RARE knife! This is one of a few knives that have Cracked Ice instead of Oystershell.


Bulldog Brand Cutting Horse KnifeBULLDOG ~ Cutting Horse ~ Genuine Stag
This is a 3 7/8 inch Closed Cuttin? Horse. This knife has blades with NO ETCH. All blades have the Fighting Dog Tang Stamp and the reverse of the master blade has 1993. This knife has Genuine Stag Handles with a Club Shield and has pinched Bolsters. This is BKC 854, 1 of only 24 made!


Bulldog Brand Premium Stockman KnifeGreenbone Quarter Horseman
This is a 4 inch closed Premium Stockman. The tang is stamped with the Fighting Dogs Tang Stamp on all tangs. The blades are made of Surgical Instrument Steel. The master blade has the Quarter Horseman Etch. The handles are Greenbone with an Acorn Shield. This is BKC 890, 100 knives were made in this configuration.


Bulldog Brand Card Series Sowbelly KnifeHeart Scimitar Sowbelly
This is a 3 3/8 inch closed Card Series Sowbelly commonly called the Scimitar Sowbelly because of the shape and sharpness of the 1995 blades. All blades have the Fighting Dog Tang Stamp and the reverse of the master blade has 1995. The master blade has a black laser etching of a pair of Fighting Dogs and Bulldog Brand. The reverse of the master blade is engraved with 1 of 1. The handles are Gray/Black Swirl with a Heart Shield. This is a 1 only, RARE knife!


Bulldog Brand Prototype Toothpick KnifeLonghorn Pearl Toothpick Prototype
This is a 5 inch closed Longhorn Toothpick. This knife has a single blade with the Longhorn Etch. On the reverse of the blade is engraved “PROTOTYPE”. The front tang has the Fighting Dogs Stamp. The handles are Genuine Pearl with a lot of fire and color and has a Bar Shield. The toothpicks were introduced in 1993.


Bulldog Brand Cattle King Equal End Stockman KnifeNo Etch Cattle King
This is a 4 ? inch 3 blade Cattle King Equal End Stockman. This knife has Surgical Inst. Steel. The Master blade has the Cattle King etch. The tang is stamped with the Fighting Dogs Stamp on all tangs. The handles are Greenbone with the Bow Tie Shield with Bulldog stamped on it and fancy pinched Bolsters. This knife is BKC 600. Only 24 knives were made in this configuration.


Bulldog Brand Large Congress KnifeNo Etch Large Congress
This is a 4 blade Large Congress. The tang is stamped with the Fighting Dogs Stamp on all tangs. Overall length of this knife is 4 ? inches closed. The master blade has the Pit-Bull Trademark etch. The handles are Greenbone with the Bowtie Shield with Bulldog written inside. It also has fancy Pinched Bolsters. This knife is BKC 672. ONLY 24 knives were made in this configuration.


Bulldog Brand Old Dominion Copperhead KnifeOld Dominion Club 2 Blade Copperhead
This is a 3 ? inch closed 2 Blade Old Dominion Knife Collectors Association Copperhead. This knife has the Fighting Bulldogs tang stamp and is dated 1993 on the reverse of 1 tang. The master blade has NO etch and is engraved with BD 1 OF 14 on the reverse. The handles are End Of Day Celluloid with a the ODKCA Acorn shield.


Bulldog Brand Palmetto Cutlery Club Toothpick KnifePalmetto Cutlery Club Toothpick
This is a 5 inch closed Club Knife Toothpick. This knife has a single blade with the 1994 Palmetto Cutlery Club Etch that is etched in Gold. This is 1 of 110 and the serial number is 086. The front tang has the Fighting Dogs Stamp and the reverse has Surgical Instrument Steel. The handles are Harvest celluloid with a Bar Shield.


Bulldog Brand Prototype Canoe KnifeProto Canoe
This is a 3 5/8 inch 2 blade Canoe. Both the blades have the Fighting Dogs tang stamp. The master blade has the Pit-Bull Trademark etch. The reverse is marked with Prototype 1 of 6. The handles are Genuine Stag with the Crest Shield. This is a Prototype made with a 1986 English Steel stamp but it has Surgical Instrument Steel. They did not use Surgical Instrument Steel in the First Generation (1978-1987), so that means that this knife can only be a Third Generation, even though the blades are dated in the First Generation.


Bulldog Brand Prototype Stockman KnifePrototype Black and Orange Stockman
This is a 3 blade Bulldog Prototype 4″ closed Stockman and features the Fighting Dog tang stamp and the reverse frosted Pit-Bull Trademark etch with Prototype engraved on the reverse. The handles are Black and Orange with Blue Celluloid with a Crest Shield and look like Tortoiseshell with Blue Stripes. This knife was made in 1995 and is 1 of 5.


Bulldog Brand Prototype Stock KnifePrototype Gray Swirl Stockman
This is a 3 blade Bulldog Prototype 4″ closed Stockman and features the Fighting Dog tang stamp and the reverse frosted Pit-Bull Trademark etch with Prototype engraved on the reverse. The handles are Gray Swirl Celluloid with a Crest Shield. This knife was made in 1995 and is 1 of 5.


Bulldog Brand Prototype Greenbone Stockman KnifePrototype Greenbone Stockman
This is a 3 blade Bulldog Prototype 4″ closed Stockman and features the Fighting Dog tang stamp and the reverse frosted Pit- Bull Trademark etch with Prototype engraved on the reverse. The Greenbone handles with a Crest Shield are like the 1st Generation Greenbone that was put on the earliest knives. This knife was never put into regular production.


Bulldog Brand Prototype Toothpick KnifePrototype Toothpick
This is a 5 inch closed Longhorn Toothpick. This knife has a single blade with the Longhorn Etch. On the reverse of the blade is engraved “PROTOTYPE”. The front tang has the Fighting Dogs Stamp. The handles look like Tortoise Shell Celluloid with beautiful blue streaks running through it. I have never seen this celluloid before, it is quite stunning. There is a Bar Shield also. The toothpicks were introduced in 1993.


Bulldog Brand Scimitar Sowbelly Stockman KnifeScimitar Sowbelly
This is a 3 3/8 inch closed Card Series Sowbelly commonly called the Scimitar Sowbelly because of the shape and sharpness of the 1995 blades. All blades have the Fighting Dog Tang Stamp and the reverse of the master blade has 1995. The master blade has a black laser etching of a pair of Fighting Dogs and Bulldog Brand. The reverse of the master blade is engraved with 1 of 1. The handles are Forest Swirl Celluloid with a Diamond Shield. This is a 1 only, RARE knife!


Bulldog Brand Single Blade Prototype Jack KnifeSingle Blade Prototype
This is a 4 inch closed single blade prototype that appears to be made on a premium stockman frame. The tang has a Fighting Dog Stamp with 1995 on the reverse. The master blade has the Pit-Bull Trademark etch with ?Prototype 1 OF 1?. The handles are jigged Greenbone with a Banner Shield. This knife was made in 1995, the last year of the third Generation. This is an extremely RARE knife, the ONLY one made.


Bulldog Brand Sowbelly Whittler Prototype KnifeBulldog Sowbelly Whittler Smooth Bone Prototype ~ USA ~ 3 7/8 Inches
This is a 3 7/8 inch Closed USA Sowbelly 3 blade Whittler. There is No Etch on the blades. The reverse of the master blade is engraved PROTOTYPE. The tang is stamped with the Fighting Dogs Stamp with Made in USA on one blade and 1995 on another. The handles are Smooth Bone with an oval shield. This knife is 1 of 2 different Bulldog knives made in the USA but the Sowbellies are the best known. This knife has a COA. This is a RARE Prototype. PROTOTYPE of BKC 1145.


Bulldog Brand Stag Sowbelly Whittler KnifeBulldog Sowbelly Whittler Stag USA ~ 3 7/8 inch ? PROTOTYPE
This is a 3 7/8 inch Closed USA Sowbelly 3 blade Whittler. There is No Etch on the blades. The reverse of the master blade is engraved PROTOTYPE. The tang is stamped with the Fighting Dogs Stamp with Made in USA on one blade and 1995 on another. The handles are Genuine Stag with an oval shield. This knife is 1 of 2 different Bulldog knives made in the USA but the Sowbellies are the best known. This knife has a COA. This is a RARE Prototype. PROTOTYPE of BKC 1147.


Bulldog Brand Sowbelly Whittler Yellow Pick Bone Prototype KnifeBulldog Sowbelly Whittler Yellow Pick Bone Prototype ~ USA ~ 3 7/8 Inches
This is a 3 7/8 inch Closed USA Sowbelly 3 blade Whittler. There is No Etch on the blades. The reverse of the master blade is engraved PROTOTYPE. The tang is stamped with the Fighting Dogs Stamp with Made in USA on one blade and 1995 on another. The handles are Yellow Pick Bone with an oval shield. This knife is 1 of 2 different Bulldog knives made in the USA but the Sowbellies are the best known. This knife has a COA. This is a RARE Prototype.


Bulldog Brand Pearl Stockman KnifeBulldog Knife 4 inch Stockman Round Bolsters ~ Pearl
This is a 4 inch closed 3 blade Round Bolster Stockman. This knife has Surgical Instrument Steel blades. The master blade is etched with the Bulldog Trademark etch. The tang is stamped with the Fighting Dogs Stamp with Surgical Inst. on the reverse side. The handles are Genuine Pearl with the Dog Bone Shield. This knife is BKC 965, 1 of 36 made.


Bulldog Brand Longhorn Toothpick Prototype KnifeBULLDOG 1993 PROTOTYPE ~ Longhorn Toothpick ~ Purple Swirl
This is a 5 inch closed Longhorn Toothpick. This knife has a single blade with the Longhorn Etch. On the reverse of the blade is engraved “PROTOTYPE”. The front tang has the Fighting Dogs Stamp. The handles are a Purple Swirl celluloid with a Bar Shield. The toothpicks were introduced in 1993.


1993 Bulldog Brand 1st Calf Roper Prototype Knife Set1st Calf Roper 1993 Proto Set
This is a once in a lifetime picture of the first 1993 Bulldog Brand Knife catalog under Jim Parker?s ownership with the EXACT 5 Calf Ropers that are pictured on the front of the catalog. In the upper left corner, you can see a portion of a COA and on the right is a shipping invoice from the Friedrich Olbertz factory, signed by Achim Gronauer, September 1993. EACH of the Calf Ropers has Bulldog Brand Proto #2 engraved on the back of the blade. All FIVE are marked as such, identically, in Block Print Letters rather than in Script. All FIVE knives have Rostfrei marked on the tang, with Solingen, Germany. While the pictures of the knives are darker on the catalog, these knives are the EXACT knives that were used for this picture on the cover of the catalog. With all FIVE knives identically marked, these knives, each being a one of a kind by itself, are sister knives to each other. This is ONE of the RAREST sets you will EVER see!

This is the only Prototype set of Calf Ropers ever made like this. All knives are 1 OF 1.


Bulldog Brand 93 Prototype Knives93 Proto’s
A Letter from the Original Buyer to the Current Owner

This is the picture Bill Swan sent me when I asked him to look around the warehouse for some prototypes. They sent all of them to me but I returned a few as they were damaged. Jim might of sent the damaged prototypes back to the factory to be repaired but I never saw them again. That top left is the Calf Roper #1 Bulldog prototype and you have the ones under it. All of the 93′s were supposed to have original paper work but didn’t. I asked for it several times and I got the copies, but what original stuff there was, you now have it. I returned those three warncliffs in the middle. One is a club knife and one was damaged. I sold that Pearl Sunfish with the elephant on it. Those are the USA made sowbellies I have some you have some. That yellow sunfish had a damaged handle, not bad, but at the time I was paying a lot for those knives and didn’t want a damaged one for the price. Looking back I should of kept them all. Long story, short, you got a bargain on those knives and some others are out there. That pearl sunfish was sold on eBay. I cant remember the buyer.


Bulldog Brand Calf Roper Lockback KnifeCoon Stripe Calf Roper Proto #2
This is a 4 3/8 inch closed Coon Stripe Celluloid Calf Roper Lockback. This knife has a highly polished blade and the Calf Roper etch. On the reverse of the blade is engraved Bulldog Brand Proto #2 in Block Print Letters. There is no tang mark which is common for Prototypes, on the reverse side of the tang is Rostfrei, Solingen. This Bulldog Brand knife has a Rostfrei blade. This was one of the original Prototypes sent to Jim Parker by the Friedrich Olbertz Company for the release of the 1993 line. This was the first year Parker took over the Bulldog Trademark from Charlie Dorton. The knife is a ONE of a kind Prototype. This knife is featured on the front cover of the first catalog under Jim Parker (Third Knife). The other Four Calf Ropers pictured on the catalog cover are in this collection also. This knife is a part of Bulldog History. This knife is the RAREST of the RARE Bulldog Brand knives, it is 1 of 1.


Bulldog Brand Gold Dust Celluloid Calf Roper Lockback KnifeGold Dust Calf Roper Proto #2
This is a 4 3/8 inch closed Gold Dust Celluloid Calf Roper Lockback. This knife has a highly polished blade and the Calf Roper etch. On the reverse of the blade is engraved Bulldog Brand Proto #2 in Block Print Letters. There is no tang mark which is common for Prototypes, on the reverse side of the tang is Rostfrei, Solingen. This Bulldog Brand knife has a Rostfrei blade. This was one of the original Prototypes sent to Jim Parker by the Friedrich Olbertz Company for the release of the 1993 line. This was the first year Parker took over the Bulldog Trademark from Charlie Dorton. The knife is a ONE of a kind Prototype. This knife is featured on the front cover of the first catalog under Jim Parker (Fourth Knife). The other Four Calf Ropers pictured on the catalog cover are in this collection also. This knife is a part of Bulldog History. This knife is the RAREST of the RARE Bulldog Brand knives, it is 1 of 1.


Bulldog Brand Greenbone Calf Roper Lockback KnifeProto #2 Greenbone Calf Roper
This is a 4 3/8 inch closed Greenbone Calf Roper Lockback. This knife has a highly polished blade and the Calf Roper etch. On the reverse of the blade is engraved Bulldog Brand Proto #2 in Block Print Letters. There is no tang mark which is common for Prototypes, on the reverse side of the tang is Rostfrei, Solingen. This Bulldog Brand knife has a Rostfrei blade. This was one of the original Prototypes sent to Jim Parker by the Friedrich Olbertz Company for the release of the 1993 line. This was the first year Parker took over the Bulldog Trademark from Charlie Dorton. The knife has a Certificate Of Authenticity and is a ONE of a kind Prototype. This knife is featured on the front cover of the first catalog under Jim Parker (Second Knife). The other Four Calf Ropers pictured on the catalog cover are in this collection also. This knife is a part of Bulldog History. This knife is the RAREST of the RARE Bulldog Brand knives, it is 1 of 1.


Bulldog Brand Abalone Celluloid Toothpick KnifeProto Abalone Toothpick
This is a 5 inch closed Abalone Celluloid Toothpick. This knife has a highly polished blade and the Longhorn etch. On the reverse of the blade is engraved Bulldog Brand Prototype in Block Print Letters. There is no tang mark on either side which is common for Prototypes. This was one of the original Prototypes sent to Jim Parker by the Friedrich Olbertz Company for the release of the 1993 line. This was the first year Parker took over the Bulldog Trademark from Charlie Dorton. The knife is a ONE of a kind Prototype. This knife is featured on the back cover of the first catalog under Jim Parker (Second From Far Left Knife). There are a total of 3 of the 5 Toothpicks pictured on the catalog back cover that are in this collection. This knife is a part of Bulldog History. This knife is the RAREST of the RARE Bulldog Brand knives, it is 1 of 1.


Bulldog Brand Gold Dust Celluloid Toothpick KnifeProto Gold Dust Toothpick
This is a 5 inch closed Gold Dust Celluloid Toothpick. This knife has a highly polished blade and the Longhorn etch. On the reverse of the blade is engraved Bulldog Brand Prototype in Block Print Letters. There is no tang mark on either side which is common for Prototypes. This was one of the original Prototypes sent to Jim Parker by the Friedrich Olbertz Company for the release of the 1993 line. This was the first year Parker took over the Bulldog Trademark from Charlie Dorton. The knife is a ONE of a kind Prototype. This knife is featured on the back cover of the first catalog under Jim Parker (Far Right Knife). There are a total of 3 of the 5 Toothpicks pictured on the catalog back cover that are in this collection. This knife is a part of Bulldog History. This knife is the RAREST of the RARE Bulldog Brand knives, it is 1 of 1.


Bulldog Brand Greenbone Toothpick KnifeProto Greenbone Toothpick
This is a 5 inch closed Greenbone Toothpick. This knife has a highly polished blade and the Longhorn etch. On the reverse of the blade is engraved Bulldog Brand Prototype in Block Print Letters. There is no tang mark on either side which is common for Prototypes. This was one of the original Prototypes sent to Jim Parker by the Friedrich Olbertz Company for the release of the 1993 line. This was the first year Parker took over the Bulldog Trademark from Charlie Dorton. The knife has a Certificate Of Authenticity and is a ONE of a kind Prototype. This knife is featured on the back cover of the first catalog under Jim Parker (Far Left Knife). There are a total of 3 of the 5 Toothpicks pictured on the catalog back cover that are in this collection. This knife is a part of Bulldog History. This knife is the RAREST of the RARE Bulldog Brand knives, it is 1 of 1.


Bulldog Brand Cuttin' Horse KnifePrototype Genuine Pearl 3 7/8 Cuttin’ Horse
This is a 3 7/8 inch closed 3 Blade Cuttin’ Horse. The handles are Genuine Pearl loaded with fire and color with NO Shield. The master blade has the Cuttin’ Horse etch, on the reverse of the blade is engraved “Prototype” in Script Letters. The blades have Fighting Bulldog Tang Stamp and 1993 on one. This was one of the Original Prototypes sent to Jim Parker by the Friedrich Olbertz Company for the release of the 1993 Bulldog Brand line. This was the first year Jim Parker took over the Bulldog Trademark from Charlie Dorton. The knife has a COPY of the Original September 1993 Invoice/Shipping Document signed by Achim Gronauer of Friedrich Olbertz. The COPY is signed by Jim Parker with a hand written description of the knife. There is a COA and this knife is a ONE of a kind Prototype. This knife comes with the Paperwork and is a part of Bulldog History. This knife and paperwork is one of the RAREST of the RARE!


Bulldog Brand Prototype Greenbone Stockman KnifePrototype Greenbone Stockman
This is a 3 3/4 inch closed 3 Blade Stockman. The handles are Greenbone with an Acorn Shield. The master blade has the Pit Bull Trademark etch, on the reverse of the blade is engraved “Bulldog Brand Prototype” in Block Print Letters. The blades have the Fighting Dogs Tang Stamp. This was one of the Original Prototypes sent to Jim Parker by the Friedrich Olbertz Company for the release of the 1993 Bulldog Brand line. This was the first year Jim Parker took over the Bulldog Trademark from Charlie Dorton. The knife has the Original September 1993 Invoice/Shipping Documents signed by Achim Gronauer of Friedrich Olbertz and is a ONE of a kind Prototype. This knife comes with the Paperwork and is a part of Bulldog History. This knife and paperwork is one of the RAREST of the RARE!


Bulldog Brand Prototype Greenbone Trapper KnifePrototype Greenbone Trapper
This is a 4 inch closed 2 Blade Greenbone Trapper. The handles are Greenbone with an Acorn Shield. The master blade has the Pit Bull Trademark etch, on the reverse of the blade is engraved “Bulldog Brand Prototype” in Block Print Letters. The blades have the Fighting Dogs Tang Stamp. This was one of the Original Prototypes sent to Jim Parker by the Friedrich Olbertz Company for the release of the 1993 Bulldog Brand line. This was the first year Jim Parker took over the Bulldog Trademark from Charlie Dorton. The knife has the Original September 1993 Invoice/Shipping Documents signed by Achim Gronauer of Friedrich Olbertz and is a ONE of a kind Prototype. This knife comes with the Paperwork and is a part of Bulldog History. This knife and paperwork is one of the RAREST of the RARE!


Bulldog Brand Prototype Stag Congress KnifePrototype Stag 3 7/8 Congress
This is a 3 7/8 inch closed 4 Blade Congress. The handles are Genuine Stag with a Bar Shield. The master blade has the Pit Bull Trademark etch, on the reverse of the blade is engraved “Bulldog Brand Prototype” in Block Print Letters. The blades have Fighting Bulldog Tang Stamp. This was one of the Original Prototypes sent to Jim Parker by the Friedrich Olbertz Company for the release of the 1993 Bulldog Brand line. This was the first year Jim Parker took over the Bulldog Trademark from Charlie Dorton. The knife has a COPY of the Original September 1993 Invoice/Shipping Document signed by Achim Gronauer of Friedrich Olbertz. The COPY is signed by Jim Parker with a hand written description of the knife. There is a COA and this knife is a ONE of a kind Prototype. This knife comes with the Paperwork and is a part of Bulldog History. This knife and paperwork is one of the RAREST of the RARE!


Bulldog Brand Prototype Stag Canoe KnifePrototype Stag Canoe
This is a 3 1/2 inch closed 2 Blade Canoe. The handles are Genuine Stag with an Acorn Shield. The master blade has the Pit Bull Trademark Blade, on the reverse of the blade is engraved “Bulldog Brand Prototype” in Block Print Letters. The blades have Fighting Bulldog Tang Stamp. This was one of the Original Prototypes sent to Jim Parker by the Friedrich Olbertz Company for the release of the 1993 Bulldog Brand line. This was the first year Jim Parker took over the Bulldog Trademark from Charlie Dorton. The knife has a COPY of the Original September 1993 Invoice/Shipping Document signed by Achim Gronauer of Friedrich Olbertz. The COPY is signed by Jim Parker with a hand written description of the knife. There is a COA and this knife is a ONE of a kind Prototype. This knife comes with the Paperwork and is a part of Bulldog History. This knife and paperwork is one of the RAREST of the RARE!


Bulldog Brand Prototype Stag Large Congress KnifePrototype Stag Large Congress
This is a 4 1/4 inch closed 4 Blade Large Congress. The handles are Genuine Stag with a Bowtie Shield with Bulldog stamped inside. The master blade has the Pit Bull Trademark etch, on the reverse of the blade is engraved “Bulldog Brand Prototype” in Block Print Letters. The blades have Fighting Bulldog Tang Stamp. One blade has 1985 English Steel which is a leftover from the First Generation. This was one of the Original Prototypes sent to Jim Parker by the Friedrich Olbertz Company for the release of the 1993 Bulldog Brand line. This was the first year Jim Parker took over the Bulldog Trademark from Charlie Dorton. The knife has a COPY of the Original September 1993 Invoice/Shipping Document signed by Achim Gronauer of Friedrich Olbertz. The COPY is signed by Jim Parker with a hand written description of this ONE of a kind knife. This knife comes with the Paperwork and is a part of Bulldog History. This knife and paperwork is one of the RAREST of the RARE!


Bulldog Brand Prototype Stag Muskrat KnifePrototype Stag Muskrat
This is a 4 inch closed 2 Bladed Stag Muskrat knife. The handles are Genuine Stag with an Acorn Shield. The master blade has the Pit Bull Trademark etch, on the reverse of the blade is engraved “Bulldog Brand Prototype” in Block Print Letters. The blades have NO Tang Stamp. This was one of the Original Prototypes sent to Jim Parker by the Friedrich Olbertz Company for the release of the 1993 Bulldog Brand line. This was the first year Jim Parker took over the Bulldog Trademark from Charlie Dorton. The knife has the Original September 1993 Invoice/Shipping Documents signed by Achim Gronauer of Friedrich Olbertz and is a ONE of a kind Prototype. This knife comes with the Paperwork and is a part of Bulldog History. This knife and paperwork is one of the RAREST of the RARE!


Bulldog Brand Prototype Stag Stockman KnifePrototype Stag Stockman
This is a 4 inch closed 3 Blade Premium Stockman. The handles are Genuine Stag with a Banner Shield. The master blade has the Pit Bull Trademark etch, on the reverse of the blade is engraved “Bulldog Brand Prototype” in Block Print Letters. The blades have Fighting Bulldog Tang Stamp. This was one of the Original Prototypes sent to Jim Parker by the Friedrich Olbertz Company for the release of the 1993 Bulldog Brand line. This was the first year Jim Parker took over the Bulldog Trademark from Charlie Dorton. The knife has a COPY of the Original September 1993 Invoice/Shipping Document signed by Achim Gronauer of Friedrich Olbertz. The COPY is signed by Jim Parker with a hand written description of the knife. There is a COA and this knife is a ONE of a kind Prototype. This knife comes with the Paperwork and is a part of Bulldog History. This knife and paperwork is one of the RAREST of the RARE!


Bulldog Brand Stag Calf Roper Prototype KnifeStag Calf Roper Proto #2
This is a 4 3/8 inch closed Genuine Stag Calf Roper Lockback. This knife has a highly polished blade and the Calf Roper etch. On the reverse of the blade is engraved Bulldog Brand Proto #2 in Block Print Letters. There is no tang mark which is common for Prototypes, on the reverse side of the tang is Rostfrei, Solingen. This Bulldog Brand knife has a Rostfrei blade. This was one of the original Prototypes sent to Jim Parker by the Friedrich Olbertz Company for the release of the 1993 line. This was the first year Parker took over the Bulldog Trademark from Charlie Dorton. The knife has the Original September 1993 Invoice/Shipping Documents signed by Achim Gronauer of Friedrich Olbertz and is a ONE of a kind Prototype. This knife is featured on the front cover of the first catalog under Jim Parker (Top Knife). The other Four Calf Ropers pictured on the catalog cover are in this collection also. This knife is a part of Bulldog History. This knife is the RAREST of the RARE Bulldog Brand knives, it is 1 of 1.


Bulldog Brand Abalone Calf Roper Prototype KnifeAbalone Calf Roper Proto #2
This is a 4 3/8 inch closed Abalone Celluloid Calf Roper Lockback. This knife has a highly polished blade and the Calf Roper etch. On the reverse of the blade is engraved Bulldog Brand Proto #2 in Block Print Letters. There is no tang mark which is common for Prototypes, on the reverse side of the tang is Rostfrei, Solingen. This Bulldog Brand knife has a Rostfrei blade. This was one of the original Prototypes sent to Jim Parker by the Friedrich Olbertz Company for the release of the 1993 line. This was the first year Parker took over the Bulldog Trademark from Charlie Dorton. The knife is a ONE of a kind Prototype. This knife is featured on the front cover of the first catalog under Jim Parker (Bottom Knife). The other Four Calf Ropers pictured on the catalog cover are in this collection also. This knife is a part of Bulldog History. This knife is the RAREST of the RARE Bulldog Brand knives, it is 1 of 1.