Bulldog Knives  
About The Brand
Age Identification
1st Generation
2nd Generation
3rd Generation
4th Generation
5th Generation
Anglo-Saxon
Custom
Mastodon Ivory

Larger picture

3 1/2 SS Lockback Canoe Prototype BKC 578-A
This is a Single Blade Canoe Lockback. The blades of this knife are made stainless steel. This knife is 3 ? inches closed. The Single Lockback blade has the Bulldog Brand with a pair of Fighting Pit-Bulls Black Laser etched with Prototype 1 of 5 engraved on the back. The tang is stamped with the Fighting Pit-Bulls, with ROSTFREI SOLINGEN stamped on the reverse. This Bulldog Knife uses a Rostfrei blade. The handles are made of a deep red composite material with a heraldic shield. BKC 578-A, 1 of 5. This is a RARE Third Generation KNIFE!


Larger picture

1996 Pen Knife Genuine Tortoise Shell 1 OF 3
This is a 2 5/8 inch closed 2 blade Pen Knife and has the Standing Dog 1996 tang stamp. The master blade has a fancy Pitbull Trademark etch with Genuine Tortoise engraved on the reverse. This knife with Genuine Tortoise Shell handles and is 1 of 3 Prototypes. The knife scales were originally for J. Primble Belknap knives that were produced in the 1930?s. No more of these knives will be made-ever. This knife comes with a Certificate of Authenticity (COA), verifying that only 3 were ever made.


Larger picture

1998 Stag Celebrated Anglo-Saxon Knife
This is a 5 ? inch closed 3 blade Anglo-Saxon Whittler. The master blade has the Celebrated Anglo-Saxon Knife etch. The tang is stamped with the 1998 Standing Dog. The handles are Genuine Stag with the Long Bar shield. PRODUCTION KNIFE.


Larger picture

Apple Coral CUSTOM Anglo-Saxon
CUSTOMIZED by Jeff Jones of Jones Cutlery. This is a 5 ? inch closed Anglo Saxon Model 3 blade Whittler. The master blade has the New Orleans Knife etch. The tang is stamped with the 1998 Standing Dog. The handles are Red Apple Coral re-handled by Jeff Jones. This knife is also shown in 3 Blade Anglo-Saxon Knives.


Larger picture

BKC 10A
This is a 1981 3 blade Gunstock. This knife has the tangs stamped with the Fighting Dogs Stamp. Overall length of this knife is 3 1/2 inches. The master Spear Blade has the Pit-Bull Trademark etch and there is no Serial Number on it. The handles are Jigged Brown Bone with the Banner Shield and a Pinched Front Bolster. This is BKC 10-A, 1 of 1. This is an overrun of BKC 10.


Larger picture

Bulldog Second Generation 3 Blade Trapper Coon Stripe
This is a 3 blade Trapper. The blades are marked 1985 but they are left over from 1985 Old Dominion Club Knives and were assembled in 1991 and 1992, making this a second generation knife. The tang is stamped with the Fighting Dogs Stamp with English Steel 1985 on the third blade. The handles are Coon Stripe Celluloid with a round Bulldog Shield. This is a RARE knife, only 40 were made.


Larger picture

1 Of 12 Genuine Heart Abalone Stockman
This is a 3 5/8 inch closed 3 Blade Stockman. This knife features the Double Dog Head Tang Stamp. The master blade has NO ETCH and is engraved with ?1 OF 12? on the reverse. The handles are Genuine Green Heart Abalone with Short Heraldic Shield. This is a RARE knife, only 12 knives were made in this configuration.


Larger picture

2 Blade Greenbone Tobacco Canoe
This is a 3 5/8 inch 2 blade Canoe. All the blades have the Fighting Dogs tang stamp. The master blade has the Tobacco etch. The handles are Greenbone with the Tobacco Leaf Shield with Tobacco stamped inside. This is made with 1986 English Steel Blades.

1986 English Steel Blades, why isn?t this a first generation knife? Please look at the First Generation Greenbone Canoes, in the Tobacco series and you?ll notice a difference. For one this looks much more green and the First Generation looks brown. For another reason, look at the jigging, it?s different than the first generation, if you look, it looks like the Third Generation jigging. But the Third Generation Canoes have a Pit-Bull Trademark etch, not Tobacco. By looking at these, we know that this is not a First Generation and it?s not a Third Generation. Most Second Generation used First Generation blades, we now know that this is a Second Generation Knife!


Larger picture

Bulldog First Generation Serial Numbered Gunstock ~ Brown Bone
This is a 2 blade Gunstock. This knife has the tangs stamped with the Fighting Dogs Stamp. Overall length of this knife is 3 1/2 inches. The master Spey Blade has the Pit-Bull Trademark etch and there is no Serial Number on it. The handles are Jigged Brown Bone with the Banner Shield. This is BKC 14-B, 1 of a Few.


Larger picture

3 3-8 Kentucky Derby Sowbelly Mastodon Bark Ivory
This is a 3 3/8 inch closed 3 Blade Kentucky Derby Sowbelly. This knife features the discontinued Fighting Bulldog tang stamp. The master blade features the frosted Pit-Bull Trademark etch. The reverse of the master blade is engraved with ?Prototype?. The handles are Brown Bark Mastodon Ivory with no shield. This knife comes with a COA. This is a 1 of 2 made, a very RARE knife and has a special COA to that fact. This knife is also pictured with 25th Anniversary Prototypes.


Larger picture

1999 BULLDOG BRAND ANGLO SAXON STAG 1 0f 100 Club Knife
3 Blade 5 1/4 inch closed 1999 Anglo-Saxon Whittler from the Old Dominion Knife Collectors Association. This is #42 and stated on the back of the master spear blade. The knife features Genuine Torched Stag, an ACORN shield with ODKCA in it. The large spear blade has an well done sharp etch in black and red of the ODKCA, an outline of the state of Virginia, a red cardinal bird. 1 0f 100, and small scrolling, stars and knives. Standing Dog tang 1999. Special Limited Edition!


Larger picture

Bulldog Third Generation 3 78 Small Congress ~ Genuine Stag ~ 1 of 12
HAND MADE BULLDOG BRAND KNIFE! This well made Third Generation 4 blade Congress model has mirror polished Surgical Instrument Steel Blades. The tang is stamped with the Fighting Dogs Stamp with Surgical Steel on the reverse side. Overall length of this knife is 3 7/8 inches closed. The reverse side of the master blade has BD 1 of 12 engraved on it. The handles are well matched Genuine Stag with the Bar Shield. The Third Generation was the official end of the Fighting Dog Stamp until the 25th Anniversary knives came out. This knife is in new condition (Pristine Mint) and has never been sharpened, carried, or used. Only 12 of these 3 7/8 4 blade congress knives were made in surgical steel, making this a very RARE knife.


Larger picture

1997 Damascus Lockback
This is a 4 inch closed 1997 Damascus Steel Lockback. It is 7 inches open. It features a 3 inch Genuine Damascus Steel Clip Blade with a laser engraved Standing Bulldog and Bulldog Brand Genuine Damascus. This knife has the 1997 Standing Dog Tang Stamp. This knife has great Genuine Stag handles with a round shield with a Bulldog head inside. An unusual and highly collectable Bulldog Brand knife. Rare!


Larger picture

3 3-4 Copperhead Tennessee Walking Horse
This is a 3 ? inch closed 2 Blade Copperhead. This knife has the Double Dog Head tang stamp. The master blade is etched with the Tennessee Walking Horse etch. The handles are Winterbottom Stag with a Crest shield.


Larger picture

Lewis and Clark Swing Guard Mammoth Tooth CUSTOM
CUSTOMIZED by Jeff Jones of Jones Cutlery. This is a 4 inch closed Lewis and Clark Swing Guard Lockback. The Single Lockback blade has the Lewis and Clark 200 Year Anniversary etch and features a swinging guard. The tang is stamped with the Fighting Pit-Bulls. The handles are Hand Selected Mammoth Tooth. The liners and backsprings have been file worked and the Bolsters have been textured by Jeff. Jeff Jones Customized. This knife is also shown in Lewis and Clark Swing Guard Lockbacks.


Larger picture

Bulldog First Generation Serial Numbered Gunstock ~ Brown Bone
This is a 2 blade Gunstock. This knife has the tang stamped with the Fighting Dogs Stamp. Overall length of this knife is 3 1/2 inches. The master Spear Blade has the Pit-Bull Trademark etch and there is no Serial Number on it. The handles are Jigged Brown Bone with the Banner Shield. This is BKC 28, 1 of 18.


Larger picture

Bulldog Second Generation Bullet Trapper Brown Bone
This is a 2 blade Bullet Trapper. The tang is stamped with the Fighting Dogs Stamp with English Steel 1985 on a second blade. The handles are Jigged Brown Bone with a Round Bulldog Shield. This knife has a Clip Master Blade with no etch. These knives were made from left over blades from a Barlow production in 1991/92. This knife is BKC 474, 1 of 36.


Larger picture

3 - 3 5-8 Mastodon Ivory stockmen
These are 3-3 5/8 closed Stockman Model 11661 knives. The master blades have no etch and the reverse is engraved "PROTOTYPE". On the top is the Spider Web Mastodon Ivory knife. The center knife is Blue Mastodon Ivory cut extra thick. The reverse of the master blade is engraved with 1 of 2. ONLY 2 WERE MADE. The bottom knife is Dark Blue Mastodon Ivory and the Prototype of the middle knife and the reverse of the master blade is engraved with ?Prototype?.

All 3 knives are rare one of a kind knives with COA?s signed by Jim Parker.


Larger picture

2000 Stag Anglo-Saxon Knife
This is a 5 ? inch closed 3 blade Anglo-Saxon Whittler. The master blade has the Pit Bull Trademark etch. The tang is stamped with the 2000 Standing Dog. The handles are Genuine Stag with the Short Heraldic Shield. PRODUCTION KNIFE.


Larger picture

BULLDOG KNIFE 3 7/8 SOWBELLY ~ USA MADE ~ Red Jigged Bone
This is a 3 7/8 Closed USA Sowbelly 3 blade Whittler. The blades have No Etch. The tang is stamped with the Fighting Dogs Stamp with Made in USA on one blade and 1995 on another. The handles are Red Jigged Bone with an oval shield. This knife is 1 of 2 different Bulldog knives made in the USA but the Sowbellies are the best known. BKC 1144, 1 of 250.

page 1   page 2   page 3   page 4   page 5   page 6   page 7   page 8   page 9   page 10   page 11   page 12   page 13   page 14   page 15   page 16