Standard View | Gallery View
Shop all stores by keyword:
This is a 1 ofa kind Custom Camillus "SHARP FINGER" The knife has never been used or carried. I made it using a new old stock factory Ground and tempered Camillus blade. Tang stamp is 3 line Camillus NEW YORK USA The filework is raised approx 1mm above the handle scales and runs all the way around the knife from approx 1" from the tip all the way to the base of the curve on the bottom of the handle scales. The handle scales are exotic Black Palm. with Nickle silver pins and side shield. The leather lanyard is Tiped with a piece of american Buffalo horn. I may make similar knives but I do not duplicate pieces.Each one is a 1 of a kind piece. All my custom knives come with a Certificate of Authenticity and free domestic shipping, International shipping is reduced and multiple combined knives ship FREE WORLDWIDE. CUSTOM ORDERS OR REPAIRS WELCOME YOUR BLADES OR MINE alll sales handeled through stoe and AAPK site!!!!
Contact Captain Rob's-Collections & Creations
$130.00
Quantity:
This is a 1 ofa kind Custom Camillus "SHARP FINGER" The knife has never been used or carried. I made it using a new old stock factory Ground and tempered Camillus blade. Tang stamp is 3 line Camillus NEW YORK USA The filework is raised approx 1mm above the handle scales and runs all the way around the knife from approx 1" from the tip all the way to the base of the curve on the bottom of the handle scales. The handle scales are exotic Ringas Tiger wood (also called Borneo Rose wood) I used solid copper Pins to accent the beauty of the wood. The leather lanyard also is tiped with Ringas Tiger wood. I may make similar knives but I do not duplicate pieces.Each one is a 1 of a kind piece. All my custom knives come with a Certificate of Authenticity and free domestic shipping, International shipping is reduced and multiple combined knives ship FREE WORLDWIDE. CUSTOM ORDERS OR REPAIRS WELCOME YOUR BLADES OR MINE alll sales handeled through stoe and AAPK site!!!!
$125.00
A well made Money clip, pocket clip knife, Poker Card Mark, polished genuine Abalone Shell overlay, with pen knife blade, and nail cleaner, file. I have found that a lot of my money clips are also being used for Poker card covers. Made exclusively by NWKC (Northwest Knife Co ). Measures 2" x 1", closed. Money clip, knife in photo is the one you will receive. Buyer to pay $4.00 for priority mail and confirmation. Satisfaction Guaranteed. Thanks for looking in. Charge my highest shipping cost for the first item and ship each additional item for $1.00. I accept PayPal, money Orders, and personal checks, but shipping will be delayed until check clears.I accept payments from anyone with a credit card at PayPal - always FREE!
Contact Northwest Knife Company
$22.00
This is a customized Buck 110 Nickel-silver Folding Hunter knife in new condition. Rehandled by me using beautiful yellow/orange-dyed Camel Bone handles with black spacers between the handles and knife. The backspring has been hand fileworked on this knife. Nickel-silver bolsters and liners. Blade tang is stamped BUCK over 110 with an arrow pointing right over U.S.A.. Beautiful fit and finish on this knife! All work was done by me in my shop here in Colorado. This beautiful, one-of-a-kind knife would make a superb addition to any collection! Buyer pays for shipping. I am always taking orders for customized knives.
Contact ARKSKNIVES
$149.99
This is a customized Buck 110 Nickel-silver Folding Hunter knife in new condition. Rehandled by me using beautiful Mammoth-dyed Camel Bone handles with black spacers between the handles and knife. The backspring has been hand fileworked on this knife. Nickel-silver bolsters and liners. Blade tang is stamped BUCK over 110 with an arrow pointing right over U.S.A.. Beautiful fit and finish on this knife! All work was done by me in my shop here in Colorado. This beautiful, one-of-a-kind knife would make a superb addition to any collection! Buyer pays for shipping. I am always taking orders for customized knives.
NWKC Custom knife opener. Measures 3", polished stainless steel. Genuine Abalone Shell handle, very unusual for a knife opener to have a handle, which I have applied, along with leather bail. Photo does not show nice luster of Abalone when polished. The opener was Made in USA. New, never used, never carried. Opener in photo are the one you will receive. Buyer to pay $2.00 for first class mail and confirmation. Satisfaction Guaranteed. Thanks for looking in. Charge my highest shipping cost for the first item and ship each additional item for $1.00. I accept PayPal, money Orders, and personal checks, but shipping will be delayed until check clears.I accept payments from anyone with a credit card at PayPal - always FREE!
$15.00
This is a customized Buck 112 Ranger lockback knife. Rehandled by me using beautiful Teal Dymondwood. The backspring has been hand fileworked on this knife. Brass bolsters and liners. Blade tang is stamped BUCK over 112 over U.S.A. making this a 1972 or 1973 issue. No nail nick on the blade. Blade is 440C which some consider a better steel than the current 420HC. Blade has been used and sharpened. Beautiful fit and finish on this knife! All work was done by me in my shop here in Colorado. This beautiful, one-of-a-kind knife would make a superb addition to any collection! Buyer pays for shipping. I am always taking orders for customized knives.
$109.99
This is a customized Buck 503 Prince small Folding lockback knife in new condition. Rehandled by me using beautiful Mule Deer Antler handles. The backspring has been hand fileworked on this knife. Nickel-silver bolsters and liners. Blade tang is stamped BUCK over 503) over U.S.A.. Beautiful fit and finish on this knife! All work was done by me in my shop here in Colorado. This beautiful, one-of-a-kind knife would make a superb addition to any collection! Buyer pays for shipping and optional insurance. I am always taking orders for customized knives.
$89.99
This is a customized Buck 110 Nickel-silver Folding Hunter knife in new condition. Rehandled by me using beautiful Mule Deer Antler handles with blue spacers between the handles and knife. The backspring has been hand fileworked on this knife. Nickel-silver bolsters and liners. Blade tang is stamped BUCK over 110 with an arrow pointing right over U.S.A.. Beautiful fit and finish on this knife! All work was done by me in my shop here in Colorado. This beautiful, one-of-a-kind knife would make a superb addition to any collection! Buyer pays for shipping and optional insurance. I am always taking orders for customized knives.
$159.99
MAKER: Camillus
CUSTOMIZER: Dale Vincent, Orvet Customs
PATTERN: Coast Guard Life Raft or Rope knife.
CLOSED LENGTH: 4-3/8 inches
BLADE LENGTH: 3-1/2 inches
BOLSTERS: Nickel silver
HANDLES: Jugged Honey Horn
BLADES: Carbon steel rope blade
LINERS: Steel
TANG STAMPS: Four-line tang stamp -CAMILLUS/CUTLERY CO./CAMILLUS N.Y./U.S.A.
CONDITION: Newly customized 1940’s knife.
DAMAGE: Some scratching at the end of the blade that could not be removed when customizing.
SNAP: Good for this pattern.
AGE: The knife was made around the time of WWII judging from the tang stamp.
MADE IN: Camillus New York, USA and customized in the U.S.A.
ADDITIONAL INFO:
This knife started life as a rope knife of the type used by the Coast Guard in life rafts (though it does not have the Coast Guard markings). I removed the wooden handles and replaced them with handles of jigged honey horn. I filed the backspring with a rope pattern and filed threading and crown work on the bolsters. This is a great knife to add to your collection or an eye-catching user.
Contact Orvet Customs
$75.00
This is a beautiful ARKSKNIVES Custom Damascus Hunting Knife in unused condition. Handles are plasticized Green-dyed Maple Wood with brass pins. The blade was forged by Two Finger Knife, Llc the world leader for finished damascus steel knife blades.
They forge all of their own damascus steel right here in the USA from 1095 and 15N20 (1075 with 2% nickel). After forging, all blades are normalized, profiled, annealed, surface ground, bevel ground, polished, heat treated to an RC 58-59, buffed, etched, final buffed, sharpened (factory edge), cleaned, oiled, and inspected at least 3 times along the way before being shipped.
All the custom work was done by me in my shop here in Colorado. Overall length of the knife is 7 1/4" and the blade is 3 1/4" long. NO sheath. This knife would make a superb addition to a collection or would be a fine user. Buyer pays for shipping. I am always taking orders for custom knife work.
PATTERN: Full Tang, Fixed Blade Bird & Trout Knife
OAL: 7 inches
HANDLE: Cocobolo wood
TANG STAMPS: CAMILLUS/New York/U.S.A.
SHEATH: Leather
CONDITION: New Customized knife from a Camillus blank
MADE IN: U.S.A. and Customized in the U.S.A.
ADDITIONAL INFO: I purchased this blank after the Camillus factory closed in 2007. The handles are made from Cocobolo wood. Cocobolo is a member of the rosewood family that has been used for knife handles for the last 150 years. The handles are attached with mosaic pins and glue. The glue prevents moisture from getting between the tang and handles and causing damage. The sheath is riveted and sewn, but has a small blemish in the leather in the front side.
$45.00
Old English made sheep shear blade. Deer leg bone handle peened on with copper pins and hand cut copper washers.
Contact Wildcat Cutlery
$55.00
White tail antler handle, blade made from hay rake tine. pinned with brass pin over copper washers.
$70.00
ZF30 Uzi Heavy Duty Defender FRED CARTER DESIGN 154CM 6061 aircraft aluminum handle scales with black scratch resistant anodized finish and soft rubber inserts. Pry bar pommel with lashing holes. Black reinforced ballistic nylon tactical sheath. M.O.L.L.E./P.A.L.S. universal fastening system 11 3/4" overall. 6 3/4" satin finish 154CM stainless CryoEdge treated blade with sawback. Full tang. MADE IN THE U.S.A. NEW OLD STOCK
NO BOX WITH THIS ONE.
Contact Coulter Cutlery Company
This 1982 Schrade USA "Little Finger" is in excellent condition with original box and papers. The sheath is not the original sheath.It is actualy a Schrade old stock 164 Badger sheath that was trimed and re sewn to make a Little finger sheath and is a very dark brown color not a true black. The knife has a high carbon steel blade and white delrine Scrimshawed handles. Tang stamp is SCHRADE USA 506SC. I do not have the box. All my items come with a 100% money money back guarantee and FREE DOMESTIC SHIPPING. I also make custom knives as well as customising and restorations CUSTOM ORDERS WELCOME YOUR BLADES OR MINE!!!!
$65.00
NWKC Custom knife opener. Measures 3". Genuine polished Sambar Stag handle, very unusual for a knife opener to have a handle, which I have applied, along with two genuine Buffalo Nickels, which along with stainless blade, have been polished. Opener in photo are the one you will receive. Buyer to pay $2.00 for first class mail. Satisfaction Guaranteed. Thanks for looking in. Charge my highest shipping cost for the first item and ship each additional item for free. I accept PayPal, money Orders, and personal checks, but shipping will be delayed until check clears.I accept payments from anyone with a credit card at PayPal - always FREE!
This knife comes from Wendell Carson in New Albany Mississippi. Wendell just finished this knife in September 2009 and we are offering this sparkling knife for your consideration. If you don't own a Fightin Bull knife by Wendell, here is an opportunity to get your first one at a great price.
This knife has the traditional Clip and Spey blades and they were made in Soligen Germany.
Contact Clay's Cutlery
This Custom Hinds Drop Point Hunter knife is 10 " in length and made by Roy Hinds from Bandera, Texas, The Cowboy Capitol of the World.
The knife is hand forged from O1 tool steel, has hidden tang and stag handle. The knife also comes with custom sheath made by Mr. Hinds.
The Sheath alone is a work of art! Blade length is 5 and 1/2 inches. Any questions or more images, let me know!
$300.00
TL-29 Custom to Barlow
MAKER: Camillus customizedPATTERN: TL-29 customized into a Barlow. CLOSED LENGTH: 3-3/4 inches HANDLES: Smooth dyed camel bone. BLADES: Carbon steel spear blade with filework on the back of the blade.BOLSTERS: Crowned custom bolsters.LINERS: Brass TANG STAMPS: CAMILLUS/NEW YORK/U.S.A.CONDITION: new BLADE ETCH: Dale R. Vincent/ Salem, ORAGE: 2007 COUNTRY OF ORIGIN: USASNAP: Good snap with half-stop ADDITIONAL INFO: This knife started life as a Plain-Jane TL-29 like million others. I took it apart and replaced the nickel silver bolsters with longer brass bolsters, essentially making it a Barlow. I file worked the bolsters with grooves and crowning. I replaced the black plastic handles with smooth dyed camel bone. I file worked the backspring and the spine of the blade with vine & leaf filework, continuing the pattern through the joint where the backspring meets the blade.
This knife is a one-of-a-kind customized knife, suitable for display or to carry and use everyday.
$79.95
Page 1 2 3 4 5
